Hotone Cybery Manual

Hotone Ikke kategoriseret Cybery

Læs gratis den danske manual til Hotone Cybery (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Hotone Cybery, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

www hotoneaudio.com.

Specifications

Number of Footswitches: 6

Number of Loops: 4 (isolated)

Bypass mode: Relay True Bypass or Analog Buffer Bypass

Buffer Bypass Input impedance: 1M Ohms

Buffer Bypass Output impedance: 100 Ohms

Power Requirement: 9V DC center negative

Current Consumption: Max. 200mA

Dimensions: 403mm(D) 56mm(W) 48mm(H)× ×

Weight: 575g

Get Hooked Up

Meet your cyber matrix controller. Cybery is a compact but versatile pedal manager that helps you keep everything in order. Four

true bypass loops guarantee a pristine signal, programmable MIDI lends you massive control, and a free mobile app sets you free

from complex and annoying hardware programming.

Features

Compact size, rock solid aluminum casing

4 independent relay-based True Bypass audio loops

Programmable MIDI control (sending PC and CC messages)

for commanding pedals, multi-effects, mobile apps, and more

Built-in Bluetooth module for wireless programming and control

Switchable high quality input buffer for preventing high frequency loss

Mute/Tuner function with independent tuner output

SW A/B function for amp channel switching

2 switching modes:

- Direct mode for instant access

- Preset mode with 40 programmable presets for different combinations

Low switching noise

9V DC power supply

*Bluetooth Smart is a trademark owned by the Bluetooth SIG, Inc.

This trademark was used merely to identify a functional characteristic of the product.

Panel Introduction

12 13

14 15

986

543

2-digit LED screen: Indicates current mode or bank/patch number.

Footswitch 1-6: Programmable footswitches with halo LEDs, for switching loops on/off,

switching banks/patches, and more.

Note: for more details, please check Modes section.

INPUT: 1/4" (6.35mm) mono input jack, connect instruments or pedal outputs.

TUNER: 1/4" (6.35mm) mono output jack, connect your tuner.

SEND: 1/4" (6.35mm) mono jack, connect to your effect input jack.

RETURN: 1/4" (6.35mm) mono jack, connect to your effect output jack.

LOOP 1/2/3/4 LEDs: Indicates on/off status for loops 1/2/3/4.

A/B: 1/4" (6.35mm) TRS jack, for switching A/B channels on your amp head. Connect to

your amp footswitch jack. A cable with 1/4" (6.35mm) TRS jacks on both ends is required.

OUTPUT: 1/4" (6.35mm) mono output jack, connect to amp or other pedal input.

BUFFER switch: Switches internal buffer on/off. If you’re suffering from

signal loss caused by a long signal chain, turning on the buffer will help.

Turn it off if you want to keep your signal pristine and when using pedals

that don’t work well with buffers.

BUFFER LED: Indicates internal buffer on/off status.

MIDI IN: Standard 5-pin MIDI input jack, for receiving MIDI info.

MIDI OUT/THRU: 5-pin MIDI output jack, for sending MIDI info.

USB: USB type B jack, for USB MIDI control.

BLUETOOTH LED: Indicates built-in Bluetooth module working status.

DC 9V: Plug in 9V DC adapter (center negative).

Modes

Cybery features two different modes: Direct mode and Preset mode. Th e Defau lt mod e is Direct Mode.

Direct Mode is used for instant access to individual pedal loops, control switches, and M IDI CC codes. In this mode, the 2-digit LED

scre en will show “dr” when powering up and then will show two dashes.

The default footswitch settings in this mode (no MIDI message included):

Footswitch 1-4: Switches Loop 1-4 on/off (green LED)

Footswitch 5: Switch A/B function (yellow LED - channel A, b lue LED – channel B)

Footswitch 6: Mute/Tuner function (red LED)

Jump Right In!

1. Launch the App Store (iOS) o r Play Store (Android) and search “Cybery”,

or simply scan the QR codes below:

2. Download and launch your app.

3. Get your gear ready (check the “Connections” section).

4. Turn on your Cybery and the Bluetooth switch on your smart device.

5. Pair your Cybery with your smart device.

6. Edit, save all changes, and ROCK OUT!

Note: Want a quick start? Every new Cybery is loaded with a preset

so you can jump right in – Check the “Modes” section below.

Connections FOOTSWITCH JACK

Preset Mode is used to create, recall, and edit presets which include multiple loops on/off status, MIDI CC or PC codes, A/B channel

switching status and engaging mute/tuner function. Cybery has 10 user banks (A-J), each bank has 4 presets ( 1-4). In this mode, the

2-digit LED screen will show “PS” when powering up and then turn to indicate the current bank/patch number.

BANK NUMBER PATCH NUMBER

The default footswitch settings in this mode (no MIDI message included):

Footswitch 1-4: Selects from 4 different patches from 1-4 (green LED)

Footswitch 5: Bank down (blue LED)

Footswitch 6: Bank up (red LED)

Switching Between Modes

You can use the matched app to switch between the two modes, but you can also switch using the hardware method below:

1. Press and hold footswitch 1 and 2 while plugging in the power jack.

2. Press footswitch 1 or 2 to select a mode (footswitch 1 for Direct Mode, footswitch 2 for Preset Mode). The LED screen will show your current selection.

3. Press footswitch 1 and 2 at the same time to conﬁrm.

Factory Reset

The Factory Reset function will restore your Cybery to its default settings. To reset your Cybery, press and hold footswitch 2 and 3 while plugging in the