Hotpoint BHWM 149 (UK)/2 Manual

Hotpoint Vaskemaskine BHWM 149 (UK)/2

Læs gratis den danske manual til Hotpoint BHWM 149 (UK)/2 (20 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Hotpoint BHWM 149 (UK)/2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

English, 1

Contents

Installation, 2-3-4-5-6-7

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Instructions for the fitter

Care and maintenance, 8

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 9

General safety

Disposal

Description of the washing machine

and starting a wash cycle, 10-11

Control panel

Indicator lights

Starting a wash cycle

Wash cycles, 12

Table of wash cycles

Personalisation, 13

Setting the temperature

Setting the spin speed

Functions

Detergents and laundry, 14

Detergent dispenser drawer

Preparing the laundry

Garments requiring special care

Load balancing systemy

Troubleshooting, 15-16

Product Guarantee and Repair Informa-

tion, 17

BHWM 149

Instructions for use

WASHING MACHINE

the angle of inclination, measured according to

the worktop, must not exceed 2°.

Levelling your appliance correctly will provide

it with stability and avoid any vibrations, noise

and shifting during operation. If it is placed on

a fitted or loose carpet, adjust the feet in such

a way as to allow enough room for ventilation

beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply

pipe by screwing it to

a cold water tap using

a 3/4 gas threaded

connection (see figu-

re).

Before performing the

connection, allow the

water to run freely un-

til it is perfectly clear.

2. Connect the other

end of the water inlet

hose to the washing

machine, screwing it

onto the appliance’s

cold water inlet, situa-

ted on the top right-

hand side on the rear

of the appliance (see

figure).

3. Make sure there are no kinks or bends in the

hose.

! The water pressure at the tap must be within

the values indicated in the Technical details

table (on the page 5).

! If the water inlet hose is not long enough,

contact a specialist store or an authorised

serviceman.

! Ensure that the supply taps are allowing wa-

ter through. Old taps may seize in the closed

position and thus prevent water reaching the

machine.

Installation

! Keep this instruction manual in a safe place for

future reference. Should the appliance be sold, tran-

sferred or moved, make sure the instruction manual

accompanies the washing machine to inform the

new owner as to its operation and features.

! Read these instructions carefully: they contain

vital information on installation, use and safety.

Unpacking and levelling

Unpacking

! This is a separate

part of the polystyre-

ne base and should

be removed with the

base.

! IMPORTANT check

when unpacking

your machine.

1. Unpack the washing machine.

2. Check whether the washing machine has

been damaged during transport. If this is the

case, do not install it and contact your retailer.

3. Remove the 4 pro-

tective screws and

the rubber bush with

the respective spacer,

situated on the rear of

the appliance (see also

the installation leaflet).

4. Seal the gaps using the plastic plugs provided.

5. Keep all the parts: you will need them again

if the washing machine needs to be moved to

another location.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount

of noise if the two front feet have not been adjusted

correctly.

1. Install the washing

machine on a flat sturdy

floor, without resting it

up against walls, furni-

ture cabinets or other.

2. If the floor is not per-

fectly level, compensa-

te for any unevenness

by tightening or loo-

sening the adjustable

front feet ; (see figure)

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Vaskemaskine
Model:	BHWM 149 (UK)/2

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint BHWM 149 (UK)/2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vaskemaskine Hotpoint Manualer

Hotpoint NWS 8469 WK SPT Manual

15 Juli 2025

Hotpoint NSWR 943C Manual

11 Juli 2025

Hotpoint NBT 1148 WSA Manual

22 Juni 2025

Hotpoint NDB 10748 WA Manual

8 April 2025

Hotpoint WMTG 725B Manual

5 April 2025

Hotpoint NSWM 742U GG UK Manual

20 Februar 2025

Hotpoint NSWF 742U BS UK Manual

20 Februar 2025

Hotpoint NWS 7469 WK SPT Manual

10 Februar 2025

Hotpoint H8 09ADS GPOWER IT Manual

10 Februar 2025

Hotpoint NDB 864489 WA Manual

24 Januar 2025

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer

SVAN SL9120DID Manual

30 Juli 2025

Wascomat H7-600 Manual

30 Juli 2025

Wascomat Junior W 75 Manual

30 Juli 2025

Frigidaire FLVW7000AW Manual

30 Juli 2025

Wascomat EX618cl Manual

30 Juli 2025

Wascomat EXSM680cl Manual

30 Juli 2025

BEKO B5W5941BDW Manual

30 Juli 2025

Haier HW90-B14367U1 Manual

30 Juli 2025

Wascomat H7-240 Manual

30 Juli 2025

AEG LWR954P16H Manual

30 Juli 2025