Hotpoint RF187MP Manual

Hotpoint Køleskab RF187MP

Læs gratis den danske manual til Hotpoint RF187MP (12 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Hotpoint RF187MP, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
GBGBGBGBGB
REFRIGERATOR/FREEZER COMBINATION
RF187MG
RF187MP
Operating Instructions
English
GB
Contents
Installation, 2-3
Positioning and connection
Reversible doors
Description of the appliance, 4
Overall view
Start-up and use, 5-6
Starting the appliance
Setting the temperature
Using the refrigerator to its full potential
Using the freezer to its full potential
Maintenance and care, 7
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Defrosting the appliance
Replacing the light bulb
Precautions and tips, 8
General safety
Disposal
Respecting and conserving the environment
Troubleshooting, 9
Guarantee, 10
After Sales Service, 11
2
GB
Installation
! Before operating your new appliance, please read
these operating instructions carefully. They contain
important information for safe use, installation and care
of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free
room.
2. Do not obstruct the airflow under and behind the
appliance. The compressor and condenser give off
heat and require good ventilation to operate correctly
and save energy.
3. Ensure the appliance is far away from any sources of
heat (direct sunlight, electric stove, etc.).
Electrical connections
After transportation of the appliance, carefully place it
vertically and wait at least 3 hours before connecting it
to the electricity mains. Before inserting the plug into the
electrical socket ensure the following:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of the
appliance, which is indicated on the data plate
located on the bottom left side of the fridge (e.g. 150
W).
The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V, 50Hz).
The socket is compatible with the plug of the
appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (see After Sales
Service). Do not use extension cords or multiple
sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see After Sales Service).
! The manufacturer declines any liability should these
safety measures not be observed.
Your appliance is supplied with a 13amp fused plug that
can be plugged into a 13amp socket for immediate use.
Before using the appliance please read the instructions
below.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved
fuse to BS 1362 should always be used and the fuse
cover re-fitted.
If the fuse cover is lost, the plug must not be used until
a replacement is obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the
correct colour as indicated by the coloured marking or the
colour that is embossed in words on the base of the plug.
Changing the plug:
Removing the plug
If your appliance has a non-rewireable moulded plug
and you should wish to remove it to add a longer cable
or to re-route the mains cable through partitions, units
etc. please ensure that either:
- The plug is replaced by a fused 13amp re-
wireable plug bearing the BSI mark of
approval.
or
- The mains cable is wired directly into a
13amp cable outlet, controlled by a
switch (in compliance with BS 5733)
which is accessible without moving the
appliance.
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit
your socket. The cable should be cut as close as
possible to the moulded plug.
Remove the fuse.
WARNING:
To avoid a shock hazard do not insert the discarded
plug into a socket anywhere else.

Produkt Specifikationer

Mærke: Hotpoint
Kategori: Køleskab
Model: RF187MP

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint RF187MP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Køleskab Hotpoint Manualer

Hotpoint

Hotpoint BCB 70301 AA Manual

1 August 2025
Hotpoint

Hotpoint HAFC8 TIA22W Manual

1 August 2025
Hotpoint

Hotpoint HAFC9 TI32SX Manual

1 August 2025
Hotpoint

Hotpoint HAFC9 TA33SX O3 Manual

1 August 2025
Hotpoint

Hotpoint BD 2422 S/HA 1 Manual

1 August 2025
Hotpoint

Hotpoint HABUF011 Manual

1 August 2025
Hotpoint

Hotpoint HAFC8 TIA22SX Manual

1 August 2025
Hotpoint

Hotpoint SZ 12 A2 D/HA Manual

1 August 2025
Hotpoint

Hotpoint HPKH 1361 S4E Manual

25 Juli 2025
Hotpoint

Hotpoint HA84TE 72 X N Manual

19 Juli 2025

Køleskab Manualer

Nyeste Køleskab Manualer

Grundig

Grundig GSBS 14620 X Manual

1 August 2025
Midea

Midea MRT14B3AWW Manual

1 August 2025
Husky

Husky CKK110-265-WH-AU Manual

1 August 2025
Grundig

Grundig GQN1232FX Manual

1 August 2025
RCA

RCA RFR320 Manual

1 August 2025
Liebherr

Liebherr ECBN 9471 Manual

1 August 2025
Grundig

Grundig GSMI1030N Manual

1 August 2025
Liebherr

Liebherr BAY 250m Manual

1 August 2025
Grundig

Grundig GWN21230XRN Manual

1 August 2025
Liebherr

Liebherr CBNbsc 778i Manual

1 August 2025