Hotpoint SI7 891 SP IX Manual

Hotpoint Ovn SI7 891 SP IX

Læs gratis den danske manual til Hotpoint SI7 891 SP IX (12 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Hotpoint SI7 891 SP IX, eller vil du spørge andre brugere om produktet?

Side 1/12
EN
1
PRODUCT DESCRIPTION
DAILY REFERENCE
GUIDE
Before using the appliance carefully read the Health and Safety guide.
THANK YOU FOR PURCHASING AN
HOTPOINT PRODUCT
To receive more comprehensive help and
support, please register your product at
www . hotpoint . eu / register
WWW
You can download the Safety Instructions
and the Use and Care Guide by visiting our
website docs . hotpoint . eu and following
the instructions on the back of this booklet.
CONTROL PANEL
1. Control panel
2. Fan
3. Circular heating element
(non-visible)
4. Shelf guides
(the level is indicated on the front
of the oven)
5. Door
6. Upper heating element/grill
7. Lamp
8. Identification plate
(do not remove)
9. Lower heating element
(non-visible)
1. ON/OFF
For turning the oven on and off.
2. MENU
For gaining quick access to the
main menu.
3. FAVOURITES
To save and quickly retrieve up to
10 favorite functions.
4. BACK
For returning to the previous
menu.
5. DISPLAY
6. NAVIGATION BUTTONS
For navigating through menus,
moving the cursor and changing
settings.
7. OK / SELECT
For selecting functions and
confirming settings.
8. START
For starting the function that has
been selected.
5
4
3
2
1
5
4
3
2
1
1
2
3
4
5
8
9
7
6
1 432 5 76 8
2
ACCESSORIES
Download the Use and Care Guide from
docs.hotpoint.eu for more information
WWW
WIRE SHELF DRIP TRAY BAKING TRAY SLIDING RUNNERS
TURNSPIT GRILL PAN SET The number of accessories may vary depending on which
model is purchased.
Other accessories can be purchased separately from the
After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
FITTING THE SLIDING RUNNERS
Remove the shelf guides from the oven and remove
the protective plastic from the sliding runners.
Fasten the upper clip of the
runner to the shelf guide
and slide it along as far as it
will go. Lower the other clip
into position.
To secure the guide, press
the lower portion of the
clip firmly against the shelf
guide. Make sure that the
runners can move freely.
Repeat these steps on the
other shelf guide on the same level.
Please note: The sliding runners can be tted on any level
REMOVING AND REFITTING THE SHELF GUIDES
To remove the shelf guides, lift them up and pull the
lower parts out of their lodgings: The shelf guides can
now be removed.
To refit the shelf guides, first fit them back into their
upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating.
USING THE TURNSPIT
Push the skewer through the
centre of the meat (bound
with string if poultry) and
slide the meat onto the
skewer until it is positioned
firmly on the fork and
cannot move. Push the
second fork onto the skewer
and slide it on until it holds
the meat firmly in place.
Tighten the fixing screw to secure it in position.
Insert the end into
the recess provided
in the oven's cooking
compartment and rest
the rounded part on the
relevant support.
Please note: To collect the
cooking juices, position the
drip tray below and add
500ml of water. To avoid
burning yourself when the skewer is hot, only handle it by
the plastic handle (which must be removed before cooking).


Produkt Specifikationer

Mærke: Hotpoint
Kategori: Ovn
Model: SI7 891 SP IX

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint SI7 891 SP IX stil et spørgsmål nedenfor, og andre brugere vil svare dig