HP Aruba AP-303 Manual

HP Router Aruba AP-303

Læs gratis den danske manual til HP Aruba AP-303 (13 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 27 anmeldelser. Har du et spørgsmål om HP Aruba AP-303, eller vil du spørge andre brugere om produktet?

Side 1/13
Aruba 303 Series Campus Access Points
Installation Guide
Rev03 | August 2018 1
The Aruba 303 Series campus access points support IEEE802.11ac Wave 2, delivering high performance with the
MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g /n wireless
services. The 303 Series access points can be deployed in either a controller-based (ArubaOS) or controller-less
(InstantOS) deployment mode.
The 303 Series access points provide the following capabilities:
IEEE 802.11a/b/g/n/ac operation as a wireless access point
IEEE 802.11a/b/g/n/ac operation as a wireless air monitor
Compatibility with IEEE 802.3af PoE
Integrated Bluetooth Low Energy (BLE) radio
Package Contents
303 Series Access Point
Ceiling mount bracket (Spare: AP-220-MNT-C1 mount kit)
Startup guide
Declaration of Conformity for Europe
Hardware Overview
The following sections outline the hardware components of the 303 Series access points.
Figure 1 303 Series (front view)
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.
System Status
Radio Status
2Aruba 303 Series Campus Access Points | Installation Guide
LED
The 303 Series access points have two LEDs that indicate the system and radio status of the device. These two
LEDs can be configured via ArubaOS or Aruba Instant software into three separate modes:
Normal mode (by default): See Table 1
Both LEDs off
Blink mode: Both LEDs blink green (synchronized)
1 blinking: one second on, one second off, 2 seconds cycle
2 flashing: mostly on, fraction of a second off, 2 second cycle
3 alternating: one second each color, 2 second cycle
Table 1 303 Series Access Point LEDs Status in Normal Mode
LED Color/State Meaning
System Status Off Device powered off
Green- Blinking1Device booting, not ready for use
Green- Solid Device ready for use, no restrictions
Green- Flashing2Device ready for use, uplink negotiated in sub optimal speed
(<1Gbps)
Red- Solid System error condition - immediate action required
Radio Status Off Device powered off, or both radios disabled
Green- Solid Both radios enabled in access mode
Green- Blinking One radio enabled in access mode, other disabled
Amber- Solid Both radios enabled in monitor mode
Amber- Blinking One radio enabled in monitor mode, other disabled
Alternating3Green: one radio in access mode
Amber: one radio in monitor mode


Produkt Specifikationer

Mærke: HP
Kategori: Router
Model: Aruba AP-303

Har du brug for hjælp?

Hvis du har brug for hjælp til HP Aruba AP-303 stil et spørgsmål nedenfor, og andre brugere vil svare dig