Hyundai H-CDM8033 Manual
Læs gratis den danske manual til Hyundai H-CDM8033 (52 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Hyundai H-CDM8033, eller vil du spørge andre brugere om produktet?
Side 1/52
H-CDM8033
CD/MP3-RECEIVER CD/MP3-
Instruction manual
2
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting,
operating and/or adjusting the product and keep the manual for reference in the future.
Table of contents
Table of contents............................................................................................................................................................................... 2
Important safeguards......................................................................................................................................................................... 3
Accessories....................................................................................................................................................................................... 3
Installation/Connections .................................................................................................................................................................... 5
Connection diagram .......................................................................................................................................................................... 8
Controllers........................................................................................................................................................................................ 9
General operations .......................................................................................................................................................................... 12
Radio operations ............................................................................................................................................................................. 14
CD/MP3/WMA/USB/SD/MMC card operations.............................................................................................................................. 17
MP3 overview................................................................................................................................................................................. 21
Anti-theft system............................................................................................................................................................................. 23
Handling compact discs................................................................................................................................................................... 24
Cleaning ......................................................................................................................................................................................... 24
Troubleshooting guide..................................................................................................................................................................... 25
Specification ................................................................................................................................................................................... 26
3
Important safeguards
Read carefully through this manual to familiarize yourself with this high-quality sound system.
The beginning of operation is the moment of the unit installation. Before use the device in winter it is recommended to heat up
the passenger compartment during 20 seconds or to the operation temperature.
Use the unit with the temperature that goes beyond the operation temperature greatly decreases the operation resource of the
screen and other components of device and can result an outage.
Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may
cause serious damage to the unit.
Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards
such as electrical shock or laser beam exposure.
Do not use the unit in places where it can be exposed to water, moisture and dust.
Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a
thunderstorm.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a
strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.
The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before
installation.
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the
power amplifier.
4
Accessories
1. Receiver 1 pc
2. Remote Controller 1 pc
3. Front panel 1 pc
4. Carrying case 1 pc
5. ISO connector 1 pc
6. Mounting parts:
Hexagon nut M5 T (3.5 mm) 1 pc
Mounting box (0.6 mm) 1 pc
Left key (1.0 mm) 1 pc
Right key (1.0 mm) 1 pc
Metal bar (0.8 mm) 1 pc
Plain washer (5 mm) 2 pc
Outer trim ring 1 pc
Spring washer (5 mm) 2 pcs
Screw (5X25 mm) 1 pc
Screw M5 (5X29.3 mm) 1 pc
7. Customer information 1 pc
8. Warranty card 1 pc
9. Instruction manual 1 pc
5
Installation/Connections
Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
Before finally installing the unit, connect the wiring and make sure that the unit works properly.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an
emergency stop.
If installation angle exceeds 30° from horizontal, the unit may not perform properly.
Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the
heater, or where it would be subject to dust, dirt or excessive vibration.
Din Front/Rear-Mount
This unit can be properly installed either from 'Front' (conventional DIN Front-mount) or 'Rear' (DIN Rear-mount installation,
utilizing threaded screw Holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.
DIN FRONT-MOUNT (Method A)
1. Car dashboard
2. Sleeve
3. Screw
4. Nut (5 mm)
5. Spring washer
6. Screw (5 25 mm)
7. Metal strap
8. Flat washer
6
1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no
obstacles (wires, dashboard elements, etc) for the unit installation.
2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix
the sleeve in place.
3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap
as shown in the picture. You can bend the strap to the needed angle with your hands.
4. Make the necessary wire connections. Ensure the connections are correct.
5. Install the unit into the sleeve until the side locks are fixed.
Dismantling the unit
a – Trim frame
b – Frame uninstall direction
c – Release key insertion
1. Switch off the unit and detach the front panel.
2. Insert your fingers into the groove in the front side of the trim frame (apply some effort to
detach the frame). Pull the frame to detach it.
3. Insert the supplied release keys into the both sides of the unit body to click, as shown in the
picture. To extract the unit from the dashboard, pull the release keys or the unit body to pull it
out. Before detaching the unit, ensure it is not fixed with the metal strap.
Trim frame installation
To install the trim frame, press it to the unit body and push it to fix it in place. This should be done before installing the front panel;
otherwise you are not able to install the trim frame. When the trim frame being installed, the side with the groove should face down
and fixed first.
7
Pic. 1
2. DIN REAR-MOUNT (Method B)
For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets.
1. Select a position in which the screw holes of the brackets (3) are aligned with the screw holes
in the unit body, and screw in two screws (2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
Note: The outer trim frame and mounting sleeve are not used for method of installation.
Detachable control panel
Detaching the control panel
1. Press OPEN button on the front panel. The panel will go down (pic. 1).
2. Push the panel to the left and then pull it towards you (pic. 2).
Attaching the control panel
Insert the left side of the control panel into the main unit (pic. 3).
Note: the control panel must be attached into the T-Joint.
Press the right side of the control panel until a “click” sound is heard.
Close the panel.
Caution:
Do not insert the control panel from the right side. It can damage the control panel. The control panel can easily
be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it
to strong shocks. The rear connector that connects the main unit and the control panel is an extremely important
part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to
clean the socket on the back of the control panel.
Pic. 3
Pic. 2
8
Connection diagram
Notes:
In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortion during high
volume level.
Prohibited to make the conductors of auto antenna and ground touch with each other.
ISO speaker connection
9
Controllers
Front panel
1. PREVIOUS/NEXT button
2. VOL knob/SEL button
3. BAND/SUB button
4. MODE button
5. POWER button
6. F/PS button
7. OPEN button
8. SD/MMC slot
9. Light indicator
10. USB jack
11. AUX in jack
12. IR sensor
13. 6/UP10 button
14. 5/DN10 button
15. 4/RDM button
16. 3/RPT button
17. TA button
18. 2/INT button
19. MUTE button
20. PTY/CLK/1/PLAY/PAUSE button
21. AF button
10
Back of the front panel
Press the OPEN button to open the panel.
1. LED indicator
2. RESET button (hole)
3. Disc slot
4. EJECT button
Note: Pressing the RESET hole will erase the clock setting and stored stations.
Panel status indicator lights up when you slide the panel down, flashes when you remove the panel.
2
3
4
1
11
Remote control
1. POWER button
2. VOL+/VOL-, NEXT/PREV, SEL buttons
3. BAND button
4. APS button
5. MODE button
1/PLAY/PAUSE button
2/INT button
3/RPT button
4/RDM button
5/DN10 button
6/UP10 button
6. RDS buttons:
TA button
AF button
PTY button
7. MUTE button
8. CLK button
12
General operations
Power button
Press any button to switch the unit on. The display will show a message “WELCOME”. Press and hold POWER button to switch the
unit off. The display will show a message “GOOD-BYE”.
Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn the unit on it will resume the
stored status you set.
Volume control
Rotate VOL knob on the faceplate. The larger the number shown on the display, the higher the volume level is. Or press VOL+/VOL-
buttons on the RC.
Sound settings
Press SEL button shortly and repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD => LOUD => LOC => ST =>
EQ=> BEEP=> COLOR 1. Rotate the VOL knob or use VOL +/VOL- buttons to adjust each mode.
VOLUME: 00, 02,......, 39
BASS/TREBLE: -7, -5,......, 0, +1, +2,......+5, +7
BALANCE: 7L,......, 7R
FADER: 7R,...., 7F
LOUD: ON/OFF
LOC: LOC ON, LOC OFF (DX).
ST: ON, OFF
EQ: CLASS, POP, ROCK, FLAT, OFF
BEEP: ON/OFF
COLOR: COLOR1, COLOR2 (to select the needed backlight color).
Note: In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display mode of radio or
disc playback mode.
13
Mode selection
Press MODE button on the RC to cycle the play mode: AUX => RADIO => DISK => USB => CARD.
Note: USB, CARD, DISK mode will only show on the display when a USB flash memory is inserted into the USB port.
Mute function
Press MUTE button to cancel the sound. Press it again or change the volume level to resume.
Subwoofer control
Press and hold the BND/SUB button to turn the Subwoofer output ON. An external amplifier is required to operate a subwoofer.
Clock
1. To display clock, press and hold PTY/CLK button on the panel or press two times CLK button on the RC.
2. When the clock is being displayed, press and hold PTY/CLK on the panel or CLK button on the RC. Hour digits will blink. Rotate
VOL knob or press VOL+/VOL- buttons on the RC to set hours. Press SEL button; minute digits will blink.
3. Rotate VOL knob or press VOL+/VOL- buttons on the RC to set minutes. Press PTY/CLK button on the panel or CLK button on
the RC to exit clock mode.
14
Radio operations
BAND selection
Press BND/SUB button repeatedly or press BAND button on the RC to select your desired radio band during RADIO mode: FM1,
FM2, FM3, AM1, AM2. Each band can store 6 preset stations, for a total of 30 preset memory stations.
Tuning
In Radio mode press PREV/NEXT buttons to manually adjust the radio frequency. Press and hold the buttons for 3 seconds once and
radio will seek the next strong and clear frequency station. Repeat to seek more stations in your listening area with a strong signal.
Mono/Stereo control (in FM radio mode)
Press SEL button until the display shows “ST ON” or “ST OFF” (MONO). Turn VOL knob or press VOL+/VOL- buttons on the RC
to switch between ON or OFF.
Improvement of reception of distant stations can be done by selecting “MONO” operation which may cut down some reception noise.
Automatic store, Automatic scan
During listening to the radio press and hold the F/PS button for more than 3 seconds. The receiver will automatically scan and save
stations for the AM/FM bands.
Press F/PS button once in Radio mode to scan the stations in all bands. You can also use APS button on the RC.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
To store a station:
Select a band (if needed).
Select a station by PREV/NEXT buttons.
Press and hold a numbered button (1-6) which you want store the station for at least 2 seconds.
To recall a station:
Select a band (if needed).
Press a Preset button (1-6) briefly to recall the stored station.
15
RDS function
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area,
the following service is not available, either.
During listening to radio or CD if there are any travel announcements from a nearly local station the radio will always know the
frequency of that radio station. Then it will receive the station, turn up the volume or interrupt the playback of the music for the
duration of the announcement. At the end of the announcement the radio will return to its previous state ready for the next
announcement.
Function AF (Alternative frequency)
Press AF button, the unit will choose the strongest FM signal for the selected station.
When AF is on, RDS information is received. When AF is flashing, RDS information is not received yet.
Function TA (Traffic announcement)
Press TA button, the unit will be active for reception of traffic announcement from local stations.
To choose the TA mode press and hold the sound select button for 2 seconds, the display will show TA SEEK. Rotate the encoder
volume to choose between the TA SEEK and TA ALARM, after choosing leave the unit idle for the mode to active.
In TA SEEK mode the unit will seek for traffic announcement program when TA is pressed. In TA ALARM mode no TA/TP is
displayed and the alarm is set off.
Local radio station search
Press SEL button to choose and set the LOCAL function ON or OFF. When the LOCAL function is on the local stations (stations with
weak radio signal) can be played. When the LOCAL function is off both local and distant stations (stations with strong radio signal)
can be played. Press the button again to turn it off.
PTY function
Press PTY/CLK button on the panel once or press PTY button on the RC to show the music type. Then press 1-6 button to choose the
different music types available.
16
Press PTY/SLK button twice to show the speech type program. Then press 1-6 button to choose the different speech type program.
Each number key will show 3 different speech program for you to choose.
Function Mask DPI- Mask all
Press SEL button for 2 seconds.
Press SEL button to cycle through to “Mask DPI”.
Rotate the encoder volume to toggle between MASK DPI and MASK ALL mode.
Leave the unit idle for the mode to take effect.
During MASK DPI mode the unit will mask only the AF which has different PI, this is the default mode. During MASK ALL mode
the unit will mask the AF which has different PI and no RDS signal with high field strength.
Retune S/L – Short/Long function
This function is to set the initial duration of automatic TA Search.
Press and hold the sound select button for 2 seconds until “TA SEEK” is shown on the LCD.
Press SEL button to cycle through the menu selections until “RETUNE_S” is shown.
Use VOL+/- button to choose “RETUNE_S” or “RETUNE_L”.
The default is “RETUNE_S”.
17
CD/MP3/WMA/USB/SD/MMC card operations
Discs for playback
This unit can play disc types: CD/CD-R/-RW. Compatible with formats: MP3/WMA.
USB/SD/MMC notes
USB functions (flash memory type) MP3 music play.
SD/MMC card support, 2in1 (SD/MMC) support.
USB flash memory.
FAT 12/ FAT 16/ FAT 32 is possible
FAT 12/16 (dir: 200 support, file: 500 support),
FAT 32 (dir: 200 support, file: 500 support).
Filename: 32 byte/ Dir name: 32 byte.
Tag (id3tag ver2.0).
Title/ Artist/ Album: 32 byte support.
Multi card reader not support. USB 2.0 support.
Notes:
USB format supports 2.0.
Capacity: 8 MB ~ 1 GB.
SD cards brands: Canon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc. Capacity: 8 MB ~ 1 GB.
MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.
Capacity: 16 MB ~ 1 GB.
Loading/Eject a disc
Insert the disc with the printed side facing upward into the slot. The word “LOAD” will blink on the display and the CD will play
automatically.
18
Press EJECT button to eject the disc. If the disc is not removed from the slot within several seconds, it will automatically be
loaded into the slot again. When the disc is ejected and removed, the unit will automatically switch to radio mode.
Multi-session CD reading
The multi-session reading will be activated automatically if the player detects a file that is written in multi-session format.
Inserting the USB/SD/MMC device
Insert the MMC/SD card or USB device into MMC/SD compartment or USB socket. Then the playing mode will be changed into
MMC/ SD or USB mode automatically. The first card/USB device track playback will start.
Note: When MMC/SD card and USB device are both inserted into their compartment or socket, the playing mode will be changed
into the mode of the later one.
Pausing playback
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
Press 1/PLAY/PAUSE button to pause the playback. Press again to resume the playback.
Playing the previous/next track
During playback press NEXT/PREV buttons to play the previous/next track. Track numbers will be shown on the display.
Fast forward and backward playback
Press and hold NEXT/PREVIOUS buttons more than 3 seconds to fast forward or reverse. Press 1/PLAY/PAUSE button when the
desired location is found.
UP 10/DN 10 function (for MP3, WMA modes)
Press 6/UP 10 button to advance 10 track at a time. Press 5/DN 10 button to go back 10 track at a time.
Repeat playback
During disc playback, press and hold 3/RPT button to repeat the current track playback. The display will show “RPT”. Press again to
cancel.
19
During playback the MP3/WMA/USB/SD/MMC format press 3/RPT button to choose RPT-1, RPT-DIR (folder repeat) or RPT-OFF.
Random playback
During disc playback, press and hold 4/RDM button to start random playback of the tracks. The display will show “RDM”. Press
again to cancel.
Intro playback
You can play the beginning of every track for 10 seconds in sequence. Press and hold 2/INT button to start intro play. The display will
show “INT”. Press again to cancel.
ID3 Tag function
If a MP3 file has ID3 Tag information it will be displayed on the LCD. If there is no ID3 Tag information, nothing will be shown on
LCD.
Search function
The search modes only works with MP3/WMA CDs and USB flash memory with MP3/WMA files. Cancel Random, Repeat and Intro
features before searching.
Track search:
Press F/PS button, then use the volume button to select the track number.
Press SEL button, the chosen track will start to play.
File search:
Press F/PS button twice and the display will show the current FILE name of the song. The digit “F” is showing after the file name
to indicate this is a file.
Use VOL knob or VOL+/- buttons to select the file name.
Press SEL button, the chosen song will start to play.
Note:It is recommended to record files in the root folder and do not use the complicated folder system to allow this type of search to
function properly.
Folder search:
20
Press F/PS button three times and the display will show the current FOLDER name. The digit “D” is showing after the file name
to indicate this is a directory.
Use the volume button to select the folder name.
Press SEL button, the chosen folder will start to play.
USB mode:
If the MP3/WMA files are stored in folders on the USB drive, the unit will start by playing the first song in the first folder.
After playing all the files sequentially in the first folder, the unit will play sequentially all of the files in the next folder. The unit will
continue playing through all of the folders on the USB drive in this manner.
AUX IN
Insert the supplied AUX IN cable’s stereo plug into the AUX IN jack on the panel of the unit.
Pres the MODE button to choose AUX.
Connect any portable radio device such as a DVD player or VCD player to the AUX IN cable.
Use the volume control to adjust the volume.
RCA line out
This output is for connecting amplifier, equalizer or other audio component that requires a pre-amp out connection (Red = Right,
White = Left).
21
MP3 overview
Notes on MP3 and WMA
MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.
This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.
The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by
the method of packet write.
The unit can not read an MP3 file that has a file extension other than “.mp3”.
If you play a non- MP3 file that has the “.mp3” extension, you may hear some noise.
In this manual, we refer to what are called “MP3 file” and “folder” in PC terminology as “track” and “album”, respectively.
Maximum number of directory level is 8, including the root directory. Maximum number of files and folders per disc is 256.
The unit may not play tracks in the order of Track numbers.
The unit plays only the audio tracks if a disc contains both audio tracks and MP3 files.
When playing a disc of 8 kbps or “VBR”, the elapsed playing time in the display window will not be correct and also the intro
play may not function properly. “VBR”: Variable Bit Rate.
The unit supports the playback of WMA files. The playback of ID3 tags for WMA format is not guaranteed, it depends on
versions and availability of Cyrillic alphabet.
WMA (Windows Media Audio) – music data compression format, created by Microsoft Corporation. This format uses coding
algorithm for compression of initial audio-record, greatly decreasing the file size, but, saving the good sound quality even when
the bit rate is low (for example, 64 Kbit/s).
Remember that the unit may not play the tracks in order they are written on disc.
Notes on creating your own CD-Rs or CD-RWs containing MP3 files
To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate
of 128 kbps.
DO NOT store more than 256 MP3 files per disc.
For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder).
When CD-R disc is used, playback is possible only for discs, which have been finalized.
22
Make sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and NOT as an audio disc. You should
not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the unit starts to
play MP3 files.
With some CD-R or CD-RW media, data may not be properly written depending on their manufacturing quality. In this case, data
may not be reproduced correctly. High quality CD-R or CD-RW disc is recommended. Up to 16 characters are displayed for the
name of an Album or a Track. ID3TAG version 1.x is required.
Note that the unit may not play Tracks in the order that you wrote them to the disc.
23
Anti-theft system
Remove the panel
1. Press POWER button to switch off the power of the unit.
2. Press OPEN button to flip down the panel.
3. Push the panel to the left and then pull it towards you.
4. Put it to the special box and take it with you.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole on the front of the set until they lock.
3. Pull out the unit.
24
Handling compact discs
Dirty, scratched or warped discs may cause skip ping or noise.
Handle the disc only by the edges. To keep clean do not touch its surface.
Discs should be stored in their cases after use to avoid scratches.
Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime).
Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some felt-tip pens, may
damage its surface.
Do not touch the unlabeled side. Do not attach any seal, label or data protection sheet to either side of a disc.
This unit cannot play 3-inch (8cm) CDs.
Never insert a 3-inch CD contained in the adapter or an irregularly shaped CD. The unit may not be able to eject it, resulting in a
malfunction.
Cleaning
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak solution of soapy water, and then wipe
clean.
Cleaning discs
Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records,
compact discs have no grooves to collect dust and macroscopic dirt, so gently wiping them with a soft cloth
should remove must panicles. Wipe in a straight motion from the center to the edge. Never use thinner benzine,
record cleaner or anti static spray on a compact disc. Such chemicals can damage its plastic surface.
25
Troubleshooting guide
Symptom Cause Solution
No power The car ignition is not on.
The fuse is blown.
If the power supply is properly connected to the car
accessory switch the ignition key to “ACC”.
Replace the fuse.
Disc cannot be loaded. Presence of disc inside the player. Remove the disc in the player then put a new
upward.
Disc cannot be read. Inserting the disc in upside down.
Compact disc is extremely dirty or
defective.
Temperature inside the car is too high.
Insert the compact disc with the label facing
upward.
Clean the disc or try to play a new one.
Cool off until the ambient temperature returns to
normal.
No sound Volume is in minimum.
Wiring is not properly connected.
Adjust volume to a desired level.
Check wiring connection.
The operation keys do not
work.
The built-in microcomputer is not operating
properly due to noise.
Front panel is not properly fix into its place.
Press the power button for about 10 seconds to reset
the unit
Sound skips. The installation angle is more than 30
degrees.
The disc is extremely dirty or defective.
Adjust the installation angle to less than 30 degrees.
Clean the compact disc/try to play a new one.
The radio does not work,
the radio station automatic
selection does not work.
The antenna cable is not connected the
signals are too weak.
Insert the antenna cable firmly select a station
manually.
26
Specification
General
Power supply 12 V DC
Current consumption max. 10 A
Maximum power output 50Wx4 channels
Fuse 10A/1A
Dimensions (L x W x H) 178 x 50 x 150 mm
FM stereo radio
Frequency range 87.5 - 108.0 MHz
Usable sensitivity 3 uV
I.F. Frequency 10.7 MHz
MW Section
Frequency range 522 kHz-1620 kHz
Usable sensitivity 40 dB
I.F. Frequency: 450 kHz
Disc player
System: Compact disc audio system
Usable disc: MP3/CD-R/CD-RW
Frequency characteristics: 20-100 Hz 5 dB
10-20 kHz 5 dB
Signal to noise CD: 50 dB (1kHz)
Number of channels: 2 stereo
Line out
Output: CD max 2000 mV
Specifications are subject to change without notice. Dimensions are approximate.
27
!
.
, ,
.
................................................................................................................................................................................... 27
.............................................................................................................................................................. 28
........................................................................................................................................................................ 29
............................................................................................................................................................... 30
...................................................................................................................................................................... 34
................................................................................................................................................................... 35
....................................................................................................................................................................... 38
CD /SD/MMC /USB ....................................................................................... 43
3..................................................................................................................................................................................... 47
............................................................................................................................................................. 49
..................................................................................................................................................... 50
................................................................................................................................................................................ 50
............................................................................................................................... 51
........................................................................................................................................................ 52
28
, .
.
20
.
, ,
.
.
, , .
, .
. ,
, .
, , .
, .
, .
.
, ,
.
, , ,
, , .
.
, .
, .
.
, .
29
1. 1
2. 1
3. 1
4. 1
5. ISO 1
6. :
M5 T (3,5 ) 1
(0,6 ) 1
(1,0 ) 1
(1,0 ) 1
(0,8 ) 1
(5 ) 2
1
(5 ) 2
(5X25 ) 1
M5 (5X29,3 ) 1
7. 1
8. 1
9. 1
30
,
, .
, .
.
, .
,
, , .
30°,
.
, ,
, , ,
, , , .
.
« » « »
« » ( DIN
), « » ( DIN,
, ). .
« » ( )
1.
2. .
3.
31
4. (5 )
5.
6. (5 25 )
7. .
8.
1. , ,
( , )
.
2.
, .
.
3.
.
. .
4. .
.
5. .
–
–
–
1. ( )
2. (
). , .
3. ,
, . ,
32
( ,
).
, .
, (
.).
« » ( )
.
.
1. , (3)
(2) .
2. .
3. .
4. .
5. ().
:.
: : , .
.
. , , .
: , .
, .
33
1. OPEN . ( . 1).
2. (. 2).
, .
( . 3).
: .
, .
. , .
. 3
. 1 . 2
34
:
, , 4
.
.
35
1. PREVIOUS/NEXT
2. VOL/ SEL
3. BAND/SUB
4. MODE
5. POWER
6. F/PS
7. OPEN
8. SD/MMC
9.
10. USB
11. AUX
12.
13. 6/UP10
14. 5/DN10
15. 4/RDM
16. 3/RPT
17. TA
18. 2/INT
19. MUTE
20. PTY/CLK/1/PLAY/PAUSE
21. AF
36
OPEN, .
1.
2. () RESET
3.
4. EJECT
: RESET .
, , .
: « ».
2
3
4
1
37
( )
1. POWER
2. VOL+/VOL-, NEXT/PREV, SEL
3. BAND
4. APS
5. MODE
1/PLAY/PAUSE
2/INT
3/RPT
4/RDM
5/DN10
6/UP10
6. RDS:
TA
AF
PTY
7. MUTE
8. CLK
38
, . «WELCOME».
POWER, . «GOOD-BYE».
: ,
, .
VOL VOL+/VOL- .
.
SEL , : VOL ( ) => BAS ( ) =>
TRE ( ) => BAL ( / ) => FAD ( / ) => LOUD
) => LOC ( ) => ST ( ) => EQ ( ) => BEEP (
) => COLOR 1 ( ).
VOL +/- , :
VOLUME: 00, 02,......, 39
BASS/TREBLE: -7, -5,......, 0, +1, +2,......+5, +7
BALANCE: 7L,......, 7R
FADER: 7R,...., 7F
LOUD:
LOC: ( )/ ( )
ST:
EQ: CLASS, POP, ROCK, FLAT, OFF
BEEP:
COLOR: COLOR1, COLOR2.
39
: 5 . 5
, .
MODE, : AUX => RADIO => DISC => USB => CARD.
: USB, CARD, DISC ,
.
SEL «LOUD OFF». VOL
VOL+/VOL-, ON ( ) OFF ( )
.
MUTE, . VOL+/VOL-
VOL, .
BND/SUB, .
.
1. PTY/CLK CLK .
2. PTY/CLK CLK . ,
, . VOL VOL+/VOL- ,
. SEL; , .
3. VOL VOL+/VOL- , .
PTY/CLK CLK .
40
BND/SUB BAND ,
: FM1, FM2, FM3, AM1, 2. 6 ,
30.
PREV/NEXT, .
3 , . ,
.
( FM )
SEL «ST ON» «ST OFF» ( ). VOL
VOL+/VOL-, .
, « », .
F/PS 3 .
.
F/PS , .
: APS .
30 (18 FM, 12 AM) .
:
( ).
PREV/NEXT.
41
2 (1-6),
.
:
( ).
c (1-6), .
RDS
: RDS ( ) . RDS
, .
CD
. ,
.
.
AF ( )
AF, FM . AF
, RDS . «AF» , RDS .
TA ( )
TA,
.
TA, 2 , TA
SEEK. , TA SEEK TA ALARM, .
TA SEEK , TA.
TA ALARM «TA/TP» ,
.
42
SEL, ( ) (LOC
ON/OFF). , .
, , .
PTY
PTY/CLK PTY , .
1-6, .
PTY , . 1-6,
. 3 .
Mask DPI- Mask all
SEL.
SEL, «Mask DPI».
VOL VOL+/VOL-, MASK DPI MASK
ALL.
MASK DPI, (AF),
, PI, AF.
MASK ALL, , ,
PI, RDS.
Retune S/L – Short/Long
TA.
SEL, «TA SEEK».
SEL, «RETUNE_S».
VOL+/- VOL, «RETUNE_S» ( ) «RETUNE_L»
).
- RETUNE_S.
43
CD /SD/MMC /USB
: CD/CD-R/-RW. :
MP3/WMA.
USB/SD/MMC
MP3 USB ( ).
SD/MMC, 2 1 (SD/MMC).
USB .
FAT 12/ FAT 16/ FAT 32
FAT 12/ 16 ( 200 , 500 ),
FAT 32 ( 200 , 500 ).
: 32 : 32 .
(id3tag ver 2.0)
: 32 .
.
USB 2.0.
:
USB: USB 2.0. : 8 M ~ 1 .
SD: SD : Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, .
. : 8 M ~ 1 .
MMC: MMC : Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, . : 16
~ 1 .
44
. «LOAD»,
. .
EJECT, . ,
. ,
.
, .
USB/SD/MMC
USB , USB
. USB SD/MMC . MODE,
USB. .
, , .
1/PLAY/PAUSE, . , .
NEXT/PREV, .
.
NEXT/PREV 3 ,
. 1/PLAY/PAUSE, .
UP 10/DN 10 ( MP3, WMA )
45
6/UP10, 10 . 5/DN10,
.
3/R , .
«RPT». , .
MP3/WMA USB/SD 3/RPT,
RPT-1 (), RPT-DIR ( ) RPT-OFF ().
4/RDM,
. «RDM». , .
Intro ( )
10 .
2/INT, . «INT».
, .
ID3 Tag
MP3 ID3 , ,
.
, USB , MP3/WMA .
, .
:
F/PS, , VOL VOL+/VOL-, .
SEL .
SEL, .
:
47
3
3 WMA
3 MPEG 3 .
3 CD-ROM, CD-R CD-RW.
3, , ISO 9660.
3, .
3, , “.mp3”.
3 , “.mp3”, .
, “ MP3” “ ”, PC
” “ ” .
8, .
256.
.
, , 3.
8 VBR, ,
. VBR:
.
WMA . ID3 WMA
, .
WMA (Windows Media Audio) – , Microsoft Corporation.
, , ,
( , 64 ) ( ).
, , .
CD-R CD-RW, MP3
3 44,1
128 . 256 3 .
48
, ISO 9660, 8,
( ).
CD-R , . ,
MP3 CD-R CD-RW , .
3 3 ,
, 3.
CD-R CD-RW
. . CD-R
CD-RW .
16 . 1. ID3TAG.
, , .
50
,
(). , .
, .
, ,
.
( ,
).
. ,
, .
, .
,
.
CD 3 (8 ).
CD 3 , , CD .
, .
. ( ), ,
, .
) .
, ,
, .
.
) , , .
.
51
.
.
,
“ ”.
.
. ,
.
.
.
.
.
.
,
.
.
.
.
.
.
.
POWER
10 ,
.
30 .
.
,
30 .
.
.
.
.
.
.
52
12 ,
50 4
. 10
10 /1 A
() 178 50 150
FM
87.5 - 108.0
3
10.7
MW
522-1620
40
450
MP3/ CD-R/ CD-RW
20-100 5
10-20 5
CD 50 (1 )
2
CD . 2000
.
.
Produkt Specifikationer
| Mærke: | Hyundai |
| Kategori: | Bilradio |
| Model: | H-CDM8033 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Hyundai H-CDM8033 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bilradio Hyundai Manualer
14 Januar 2025
8 August 2024
6 August 2024
2 August 2024
1 August 2024
1 August 2024
30 Juli 2024
29 Juli 2024
29 Juli 2024
28 Juli 2024
Bilradio Manualer
- Mystery
- Crunch
- Vordon
- Stinger
- Voxx
- Nextbase
- Hifonics
- Boss
- AKAI
- Fiat
- Dension
- Ford
- Orion
- Blaupunkt
- Twister
Nyeste Bilradio Manualer
15 Juni 2025
15 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025