
Thank you for purchasing the ICON ProAudio Cube Mi5/ Cube Mi3/ MidiPort 2 digital audio Interface. We
sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete
satisfaction, we will endeavor to make things right.
In these pages, you'll find a detailed description of the features of the Cube Mi5/ Cube Mi3/ MidiPort 2 digital
audio interface, as well as a guided tour through its front and rear panels, step-bystep instructions for their
setup and use, and full specifications.
Please register the product on our website at the below link www. iconproaudio.com/registration:
Please follow the step by step procedures. Start by inputing the device’s serial number as well as your personal
information, etc. By registering your product online, you will be entitled to service and after-sales support at our
Help Center by visiting our website at www.iconproaudio.com. Also, all the registered products under your
account will be listed on your personal product page where you will find updated information such as
firmware/driver upgrades, software bundles, user manual downloads, etc. for your device.
As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely
event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
With proper care and adequate air circulation, your Cube Mi5/ Cube Mi3/ MidiPort 2 digital audio interface will
operate without any trouble for many years. We recommend that you record your serial number in the space
provided below for future reference.
Download the Windows driver from your
“Personal User
Page at www.iconproaudio.com”
After you downloaded the driver file, please click it to
start the installation process
Thanks to ICON's innovative MultiPlat software driver technology your USB MIDI interface supports Multi-
Platform"applications. Page at www.iconproaudio.com”.After you downloaded the driver file, please click it to
start the installation process