Icon WM 3.2 Manual

Icon Mikrofon WM 3.2

Læs gratis den danske manual til Icon WM 3.2 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Icon WM 3.2, eller vil du spørge andre brugere om produktet?

Side 1/2
Professional Wireless Microphone
What’s in the package?
Microphone / Microphone X 2
18650 Battery / 18650 Battery X 2
Handheld microphone anti-skid ring / Handheld microphone anti-skid ring X 2
Type-C charging cable / Type-C charging cable X 2
Receiver
Instructions for use
1.Plug the receiver into the microphone input of the speaker or amplier;
2.Turn on the receiver power switch:
3.Turn on the power switch of the handheld microphone (install a 18650
Battery).
FM operation
:
1. If you need frequency modulation, please operate with the receiver
turned on:
2. When FM, just press the FM switch to adjust to the next frequency;
3. When performing frequency pairing, turn on the power switches of
both the handheld microphone and the receiver at the same time. Wait
for about 2 seconds. When the indicator light of the receiver is on, it
means the connection is successful.
Troubleshooting:
1. When there is no sound or the sound is weak, rst check the power
supply to ensure that the receiver is connected properly, the handheld
microphone has su󰀩cient power, and the battery is inserted in the
correct way. When the power is normal or the sound is faint, please
increase the volume of the speaker or amplier.
2. When there is distortion or excess noise, check whether there are
interfering devices nearby, such a CD players, computers, digital
devices, earplug monitoring systems, etc, try to remove the device
rst. H multiple systems are used, the frequency interval between the
systems can be increased.
Specications
System specication parameters
Modulation mode Digital frequency modulate
Frequency range
CHA:610.500MHz-639.500MHz
(
China
)
CHB:640.500MHz-669.500MHz
CHA:550.500MHz-564.000MHz
(
America
)
CHB:565.000MHz-579.000MHz
CHA:624.500MHz-653.500MHz
(
Germany / New Zealand
)
CHB:654.500MHz-683.500MHz
CHA:806.125MHz-807.875MHz
(
Japan
)
CHB:808.000MHz-809.750MHz
CHA:926.000MHz-928.800MHz
(
South Korea
)
CHB:929.000MHz-931.800MHz
CHA:750.000MHz-752.800MHz
(
Thailand
)
CHB:753.000MHz-755.800MHz
CHA:630.000MHz-659.000MHz
(
Guatemala
)
CHB:660.000MHz-689.800MHz
Frequency response 75Hz-18kHz+3dB
Max. Deviation Range ±50kHz(with level limiting)
THD <1.0%@1kHz
Signal-to-noise ratio >98dB
Working range Up to 30-50m
Rf carrier stability ±0.005%(-10
-50
)
Receiver parameters
Power supply 3.7V/18650 lithium battery
Power consumption 100mA
Battery life Up to 6 hrs
Recharging time About 3 hours (5V/1A)
Charging port USB
Output interface 3.5mm/6.35mm
Transmitter parameters
Battery type 3.7V/18650 lithium battery
Working time Up to 5-10 hrs
Selectable Channel
30 channels
(
China
)
15 channels
(
America
)
30 channels
(
Germany / New Zealand
)
15 channels
(
Japan
)
15 channels
(
South Korea
)
15 channels
(
Thailand
)
30 channels
(
Guatemala
)
WM 3.1 /WM 3.2
WM 3.1 WM 3.2
+


Produkt Specifikationer

Mærke: Icon
Kategori: Mikrofon
Model: WM 3.2

Har du brug for hjælp?

Hvis du har brug for hjælp til Icon WM 3.2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Icon Manualer

Icon

Icon M1 Manual

2 December 2025
Icon

Icon HyperDrive Manual

1 December 2025
Icon

Icon Thunder X Manual

30 November 2025
Icon

Icon C1 Manual

30 November 2025
Icon

Icon Apollo Manual

29 November 2025
Icon

Icon D1 Manual

29 November 2025
Icon

Icon DynaMic 7B Manual

28 November 2025
Icon

Icon D2 Manual

28 November 2025
Icon

Icon Artemis Manual

27 November 2025
Icon

Icon M5 Manual

25 November 2025

Mikrofon Manualer

Nyeste Mikrofon Manualer