IFit IFAHR120 Manual

IFit Sport IFAHR120

Læs gratis den danske manual til IFit IFAHR120 (4 sider) i kategorien Sport. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om IFit IFAHR120, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Thank you for purchasing the innovative iFIT

SMARTBEAT heart rate monitor. Please read this

manual before using the heart rate monitor.

IMPORTANT: To download a manual in a different

language, please see the accompanying Quick

Start Guide.

If you have questions after reading this manual,

please see the accompanying Quick Start Guide

for Member Care contact information.

HOW TO CHARGE THE HEART RATE MONITOR

You must charge the heart rate monitor before

it can be used. To charge the heart monitor, first

remove the small sheet of clear film (not shown)

from the back of the sensor (A).

Next, align the metal pins (B) on the charger (C) with

the contacts (D) on the back of the sensor. Then, set

the charger on the sensor; a magnet in the charger

will hold the charger in place.

Plug the cord (E) on the charger into a USB port on

your computer or on another power source. While

the heart rate monitor is charging, the LED light

on the front of the sensor will flash red. When the

sensor is fully charged, the LED light will turn solid

green.

Model Number IFAHR120

IFIT is a registered trademark of iFIT Inc. The Bluetooth

word mark

and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license.

ANT

™ is a trademark of Garmin Ltd. or its subsidiaries.

HOW TO PUT ON THE HEART RATE MONITOR

Locate the end of

the armband (F) that

does not have the iFIT

logo. Peel that end

of the armband away

from the rest of the

armband.

Slide the heart rate

monitor onto your arm

as shown. Make sure

that the iFIT button (G)

is facing upward. You

must position the heart

rate monitor under

your clothes, against

your skin, 2 to 3 inches

(5 to 8 cm) above or

below your elbow.

Then, pull the free end

of the armband to adjust the length of the armband,

and firmly press the free end against the rest of

the armband. Do not overtighten the armband;

overtightening may restrict the circulation in

your arm.

HOW TO USE THE HEART RATE MONITOR

The heart rate monitor must be paired with

compatible fitness equipment that contains an

ANT

receiver or a Bluetooth

Smart receiver.

When the heart rate monitor is paired with compat-

ible fitness equipment, the fitness equipment will

display your heart rate.

See the photograph above. To activate the heart

rate monitor, press the iFIT button (G). While the

heart rate monitor is detecting your heart rate, the

LED light on the sensor will alternate between blue

and green. When your heart rate is detected, the

LED light will flash green. If your heart rate is not

detected, the LED light will alternate between blue

and red.

To pair the heart rate monitor with your fitness

equipment, follow the instructions in the user’s

manual included with your fitness equipment. When

the heart rate monitor is successfully paired, the

LED light on the sensor will be solid blue for a few

seconds and will then flash green.

To turn off the heart rate monitor, press and hold the

iFIT button for 3 seconds. The LED light will be solid

red for 2 seconds and will then turn off.

CARE AND MAINTENANCE

• Store the heart rate monitor in a warm, dry place.

Do not store the heart rate monitor in a plastic

bag or other container that may trap moisture.

• Do not expose the heart rate monitor to direct

sunlight for extended periods of time, and do not

expose it to temperatures above 122°F (50°C)

or below 14°F (-10°C) during use, transportation,

or storage. CAUTION: If the heart rate monitor

is exposed to very high temperatures or very

low pressures, if it is disposed of in a fire or

an incinerator, or if it is disposed of by cutting

or crushing, the battery may explode or leak

flammable gas or liquid.

• For maximum battery capacity, use the battery

at room temperature. If the battery is used in

low temperatures, the battery capacity will be

reduced.

• To clean the sensor, use a damp cloth and a small

drop of mild soap. Then, wipe the sensor with a

damp cloth and thoroughly dry it with a soft towel.

Never use alcohol, abrasives, or chemicals

to clean the sensor. Hand wash and air dry the

armband.

Produkt Specifikationer

Mærke:	IFit
Kategori:	Sport
Model:	IFAHR120

Har du brug for hjælp?

Hvis du har brug for hjælp til IFit IFAHR120 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sport IFit Manualer

IFit IFAHR120 Manual

7 Oktober 2025

Sport Manualer

Nyeste Sport Manualer

Coros Pace 2 Manual

5 Oktober 2025

Crane AU4-PF-6LA Manual

3 Oktober 2025

Bryton Cardio 30 Manual

27 September 2025

Sportline Duo 1025 Manual

25 September 2025

Sportline S12 Manual

25 September 2025

Sportline 965 Manual

25 September 2025

Sportline 560 Duo Manual

25 September 2025

Sportline 905 Manual

25 September 2025

Sportline Solo 920 Manual

25 September 2025

Sportline Duo 1010 Manual

25 September 2025