IFM E33732 Manual


Læs gratis den danske manual til IFM E33732 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 163 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 82 anmeldelser. Har du et spørgsmål om IFM E33732, eller vil du spørge andre brugere om produktet?

Side 1/2
Installation instructions
Aseptoflex Vario adapter
with metal-to-metal seal
E337xx
E338xx
704863/01 02/2011
UK
2
1 Installation sensor - adapter
Screw the sensor into the adapter
until it is hand-tight. When doing
so, avoid mechanical effects on the
sealing areas, the hygienic area and
the pressure measuring cell.
The inside of the adapter is coated with
parylene C (USP class VI). Therefore
it is not necessary to use additional
lubricants.
B
Clamp the sensor + adapter into a
clamping device (B). Tighten the
clamping device only slightly so that
the adapter does not warp.
Tighten the sensor using a spanner
until you can feel the end stop (this
corresponds to a maximum tighten-
ing torque of 35 Nm). Note: Further
tightening may affect the sealing
effect.
2 Mounting to the process connection
Fix the sensor + adapter are fixed to the process connection using a fixing ele-
ment (coupling nut, clamp flange, etc.).
If it is not possible to slide the fixing element down over the top of the unit: slide
it up over the bottom of the unit before the adapter is mounted.
Use in hygienic areas to EHEDG:
Make sure that the sensors are integrated into the system in accord-
ance with EHEDG.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E33732

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E33732 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM AL4032 Manual

8 Juni 2025
IFM

IFM AL4132 Manual

8 Juni 2025
IFM

IFM AL4133 Manual

7 Juni 2025
IFM

IFM AL4033 Manual

6 Juni 2025
IFM

IFM DW3003 Manual

9 April 2025
IFM

IFM IG6084 Manual

13 Marts 2025
IFM

IFM PV2102 Manual

10 Marts 2025
IFM

IFM OVP812 Manual

25 Januar 2025
IFM

IFM AE3400 Manual

25 Januar 2025
IFM

IFM DTE932 Manual

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer