Ifrogz Airtime Vibe Manual

Ifrogz Headset Airtime Vibe

Læs gratis den danske manual til Ifrogz Airtime Vibe (16 sider) i kategorien Headset. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Ifrogz Airtime Vibe, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Manual

WIRELESS ANC HEADPHONES

EN | Airtime Vibe Instructions

Introduction

Airtime Vibe wireless active noise canceling (ANC)

headphones provide a fully immersive sound experience.

This quick start guide will teach you how to take advantage

of all the premium features.

Comfort-Fit Features

Airtime Vibe wireless ANC headphones have an adjustable

headband and earcups that rotate and hinge to give

you a customized ﬁt. The headphones are designed to

sit comfortably on your head with the earcups angled

forward. When your headphones aren’t in use, the earcups

collapse inward to ﬁt easily in the carrying case.

Music and Call Controls

Buttons for music and call controls are located on the back

of the right earcup. The raised symbols on the Plus and

Minus buttons make them easy to navigate by touch.

Power button (Top)

· Long press – Power on/Power o/Deny call

· Double click – Voice control (Siri and Android)

· Quick press – Play/Pause/Answer call/End call

Plus button (Middle)

· Quick press – Volume up

· Long press – Track next song

Minus button (Bottom)

· Quick press – Volume down

· Long press – Track previous song

Using the Active Noise Cancelation (ANC)

The ANC button is on the front of the right earcup with

the letters NC on it. Press the button for two seconds to

activate noise cancelation. When the ANC is on, a white

LED will light beneath the button. To turn the ANC o,

press the button again for two seconds and the white

LED will go o. You can use the ANC feature to block out

ambient noise even when music isn’t playing and the

headphones are turned o.

Pairing the Headphones with Your Device

1. Make sure your device’s Bluetooth® connection is on.

2. Press and hold the Power button until the LED ﬂashes

white and red, indicating pairing mode.

3. On your device, select “IFROGZ Airtime Vibe.”

Complete any additional steps your device requires.

4. A white light will ﬂash twice, indicating pairing is

complete.

5. To turn your headphones o, press and hold the

Power button for three seconds. The LED will turn

red quickly before they power o.

Charging the Headphones

To charge your Airtime Vibe headphones, connect the

micro USB end of the included charging cable to the

port on the bottom of the right earcup. Connect the USB

end of the charging cable to your preferred USB outlet.

The LED will be red while the headphones are charging.

When fully charged, the light will turn o until the charging

cable is removed.

Wired Listening

You can connect the headphones to your device for wired

listening by plugging the included auxiliary cable into

the 3.5 mm port on the bottom of the right earcup and

connecting the other end of the cable to your device.

Included in this Package

Airtime Vibe wireless active noise canceling headphones

Carry pouch

Micro-USB charging cable

Auxiliary cable

Produkt Specifikationer

Mærke:	Ifrogz
Kategori:	Headset
Model:	Airtime Vibe
Produktfarve:	Sort
Sammenfoldelig:	Ja
Produkttype:	Headset
Pakkedybde:	195 mm
Pakkebredde:	214.8 mm
Pakkehøjde:	80 mm
Bluetooth:	Ja
USB-stik:	Micro-USB
Antal:	1
Kabler inkluderet:	AUX,Micro-USB
Pakketype:	Hængende boks
Anbefalet brug:	Musik
Impedens:	32 ohm (Ω)
Forbindelsesteknologi:	Kabel & trådløs
Kabellængde:	2 m
Batterilevetid (maks.):	30 t
Bæremåde:	Headset
Headset type:	Binaural
USB-tilslutning:	Ja
Hovedtelefon frekvens:	20 - 20000 Hz
Hovedtelefon følsomhed:	98 dB
Driverenhed:	40 mm
Mikrofontype:	Indbygget
Batteridrevet:	Ja
Batteritype:	Indbygget batteri
Opladningskilde:	USB
Ørekobling:	Circumaural
Etui:	Ja
Vedvarende afspilningstid, lyd:	30 t