Iiyama WP II960A Manual


Læs gratis den danske manual til Iiyama WP II960A (8 sider) i kategorien Trådløs oplægsholder. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Iiyama WP II960A, eller vil du spørge andre brugere om produktet?

Side 1/8
ScreenBeam®
|
960
ScreenBeam 960
Wireless Display Receiver
Quick Start Guide
This Quick Start Guide provides the instructions on how to install ScreenBeam 960
receiver, connect client devices, and setup for deployment. Refer to the support
website for the full deployment guide, latest updates, and best practices.
Before Beginning Deployment
Before deploying ScreenBeam products, check for the latest firmware, release
documentation and tech tips.
zFor ScreenBeam receiver’s deployment guide, firmware upgrades, and release
notes, go to: https://support.screenbeam.com/960
zFor Miracast or native macOS/iOS wireless display connection tutorial, go to:
https://www.screenbeam.com/setup
zFor ScreenBeam Central Management System (CMS) software, go to:
https://support.screenbeam.com/cms
zFor Open Source information, go to: https://opensource.screenbeam.com
Package Contents
zScreenBeam 960 receiver
zPower supply
zHDMI cable
zQuick Start Guide (this document)
zRegulatory documents
Documentation
For FAQs, troubleshooting tips
and support, visit:
https://support.screenbeam.com
Need Help?
To open a ticket for support, visit:
https://support.screenbeam.com/ticket
1 | screenbeam.com
quick start guide
quick start guide
Requirements
Minimum System Requirements
The latest Windows 7 and later, macOS 10.10 and later, iOS 9
and later, or Android 4.2 or later with Miracast; refer to online
support for the latest list.
Network Requirements
Refer to the online support for the most recent information.
Note: Additional network configuration is not required for
Wi-Fi Miracast enabled device to connect. Verify Group
Policy and firewall settings to allow Wi-Fi Direct groups or
hosted networks.
Setup Requirements
zScreenBeam 960 receiver
zDisplay with an available HDMI input
zAn ethernet network connection with DHCP IP or a
Wi-Fi router
Note: This is used for wireless display over LAN and
management.
zScreenBeam wireless display app
Note: Not required for Windows 10/8.1, macOS, and iOS
with native screen mirroring support.
2 | screenbeam.com
A. Connect Receiver to Display
Figure 1 Connection guide
1. Place the receiver next to the display.
2. Connect one end of the provided HDMI cable to the
receiver’s HDMI port and the other end to an available HDMI
port on the display.
Note: For VGA connection details, refer to the
ScreenBeam 960 User Guide.
3. Optional: If the display has USB HID touch capability, insert
the HID USB connector into the USB port of the receiver.
(USB Cable is not included)
4. Connect the receiver’s power supply to the receiver’s power
port, then to an electrical outlet.
5. Optional: Connect one end of the Ethernet cable to the
receiver’s Ethernet port and connect the other end to
the network switch with DHCP IP. (Ethernet cable is not
included).
Note: Refer to section B for more information on setting
up a network connection.
6. Turn on the display and switch to the corresponding input
connected to the receiver.
7. Wait about 30 seconds, then verify the Ready to Connect
screen appears on the display.


Produkt Specifikationer

Mærke: Iiyama
Kategori: Trådløs oplægsholder
Model: WP II960A

Har du brug for hjælp?

Hvis du har brug for hjælp til Iiyama WP II960A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Trådløs oplægsholder Iiyama Manualer

Iiyama

Iiyama WP II960A Manual

8 August 2024

Trådløs oplægsholder Manualer

Nyeste Trådløs oplægsholder Manualer

Allsee

Allsee PSDV2 Manual

20 Februar 2025
Epson

Epson ELPWT01 Manual

31 December 2025
Kramer

Kramer VP-772T Manual

19 December 2024
Kramer

Kramer VP-772 Manual

19 December 2024
SMK-Link

SMK-Link VP4750 Manual

17 December 2024
SMK-Link

SMK-Link VP4570 Manual

17 December 2024
SMK-Link

SMK-Link VP4450 Manual

17 December 2024
SMK-Link

SMK-Link VP4550 Manual

17 December 2024