ILive ISB200 Manual

ILive Højttaler ISB200

Læs gratis den danske manual til ILive ISB200 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 24 anmeldelser. Har du et spørgsmål om ILive ISB200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Important Safety Instructions

• Read these Instructions.

• Keep these Instructions.

• Heed all Warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including ampliers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding - type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into

your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specied by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long

periods of time.

• Refer all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• Use only with a cart, stand, tripod, bracket, or table specied by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

FCC Warnings

Warning: Changes or modications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in

Overview

Wireless Tailgate Party Speaker

User’s Guide for Model ISB200 v2485-01

a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

• WARNING: Shock hazard - Do Not Open.

• CAUTION: Use of controls or adjustments or performance of procedures

other than those specied may result in hazardous radiation exposure.

• WARNING: Changes or modications to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to operate

the equipment.

• WARNING: Do not place this unit directly onto furniture surfaces with any

type of soft, porous, or sensitive nish. As with any rubber compound made

with oils, the feet could cause marks or staining where the feet reside. We

recommend using a protective barrier such as a cloth or a piece of glass

between the unit and the surface to reduce the risk of damage and/or staining.

• WARNING: Do not ingest battery, chemical burn hazard.

• Battery shall not be exposed to excessive heat such as sunshine, re or the

like.

• Lithium batteries, like all rechargeable batteries, are recyclable and should

be recycled or disposed of according to state and local guidelines. They

should never be disposed of in normal household waste and they should never

be incinerated, as they might explode. Contact your local government for

disposal or recycling practices in your area.

Features

• Bluetooth wireless

• Voice prompts announce speaker functions

• 8” full range speaker

• LED light eects

• FM scan radio

• Microphone input

• Rotary volume control

• 3.5mm Aux in

• USB port - supports MP3 le format

• Carry handle

• Built-in rechargeable battery

• Battery life: approx. 4 hours at 50%

WARNING: To reduce the risk of electric

shock, do not remove cover (or back). No

user-serviceable parts inside. Refer servicing

to qualied service personnel.

WARNING: This product can expose you to

chemicals including lead, which is known to

the State of California to cause cancer. For

more information go to: www.P65Warnings.

ca.gov This product meets and complies with

all Federal regulations.

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user accessible

parts.

The lightning ash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of un-insulated

“dangerous voltage” within the product’s

enclosure that may be of sucient magnitude

to constitute a risk of electric shock to persons.

Control Panel

1. Power/Volume Wheel: Turn to power ON/OFF and adjust volume level

2. Solid red light when charging. When the unit is fully Charging Status LED:

charged, the light will turn o.

3. DC Power Input: Use to charge the internal battery and power the speaker.

Charge time is approximately 4 hours.

4. Aux in (3.5mm Input)

5. Press to change audio source between Bluetooth, Aux in, Source/LEDs:

USB, and FM. Press and hold to turn LED lights ON/OFF.

6. Press to skip to next track or replay previous track. In Next/Previous/TWS:

FM Mode press to cycle through radio stations. In Bluetooth mode, press

and hold the button to enter Party Plus mode which will allow / TWS

this speaker to pair with another ISB200 speaker for True Wireless Stereo.

7. Play/Pause/Pair: Press to play/pause a track. In FM Mode press to start

auto-search and save all scanned radio stations. In Bluetooth mode, press

and hold for 3 seconds to manually pair to a Bluetooth device.

8. USB Port

9. Microphone Input

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:

www.iLiveElectronics.com

Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de

apoyo en: www.iLiveElectronics.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment

posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

Customer Service: Email Support: Email Parts:1-888-999-4215 | prodinfo@dpiinc.com | partsinfo@dpiinc.com

Specications are subject to change without notice.

Customer Support

Protect for Today

Sustain for Tomorrow

Made

Green

Aux In

Requires a 3.5mm audio cable (not included).

1. Connect a 3.5mm audio cable to the on the unit and the Aux In

audio output/headphone jack on an audio device.

2. Press Source/LEDs Aux in .to switch to mode

3. Use the controls on the connected device to select and play audio.

Bluetooth Wireless

Pairing & Playing Audio

1. Press the Source/LEDs Bluetooth Mode. button to select

2. When the speaker is ready to pair a voice prompt will sound. Using the

controls on your Bluetooth device, scan for and select in your ISB200

Bluetooth settings to pair. Refer to the user’s manual for your specic device for

instructions on pairing and connecting Bluetooth devices.

3. When successfully paired, a voice prompt will sound from the unit.

4. Use the controls on the connected device to select and begin playing audio.

Audio played through the connected Bluetooth device will now be heard

through the speaker. Use the controls on the speaker or the connected

device to play, pause, and adjust volume.

Note: After initial pairing, the unit will stay paired unless unpaired manually by the

user or erased due to a reset of the device. If your device should become unpaired

or you nd it is unable to connect, press and hold the Play/Pause/Pair button to

pair manually and repeat the above steps.

USB Drive

1. Load a USB drive into the USB media drive

2. The speaker will automatically switch to USB mode.

3. Use the controls on the speaker to select and play and pause audio from the

connected USB drive.

FM Radio

To use the FM radio, press the button to switch toSource/LEDs FM mode.

Auto Search and Saving Stations

1. To use the auto search function press the Play/Pause/Party Plus button

while in FM mode.

2. The radio will auto search stations and save them.

3. To cycle through the saved stations press the buttons. Next/Previous

Using the Microphone

To use a microphone, plug a microphone into the and the Microphone Input

speaker will project your voice out loud. Use the in order to control Volume Wheel

the volume of the microphone.

Charging the Battery

To power the unit or charge the internal battery, connect the DC Power Input on

the speaker to a standard power outlet using an AC/DC power adapter.

Party Plus Mode.

Party Plus Mode allows two identical “ISB200” speakers to pair together for a

stereo sound eect.

1. To enter Party Plus Mode, Power ON both speakers and set to Bluetooth

mode.

2. Press and hold the button on one of the units until an audible chime is

heard. The speakers will attempt to pair to each other.

3. When the 2 speakers are paired together a voice will announce the

connection.

4. Connect Bluetooth device to speakers using the steps from the “Pairing

and Playing Audio” section above.

5. Use your device to select and play tracks. The audio will now be heard

through both speakers.

Produkt Specifikationer

Mærke:	ILive
Kategori:	Højttaler
Model:	ISB200

Har du brug for hjælp?

Hvis du har brug for hjælp til ILive ISB200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler ILive Manualer

ILive Suncooler+ IASB504 Manual

8 Juli 2025

3 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Muse M-968 BTY Manual

1 August 2025

Grundig Portable 360 Manual

1 August 2025

Grundig Band 360 Manual

1 August 2025

Grundig GBT Connect 360 Manual

1 August 2025

Muse M-968 BTR Manual

31 Juli 2025

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025

Valcom VIP-480AL-W-SA Manual

30 Juli 2025

Rockustics StoneHenge II-S/T Manual

30 Juli 2025