Imarflex IDC-1810 Manual

Imarflex Ikke kategoriseret IDC-1810

Læs gratis den danske manual til Imarflex IDC-1810 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Imarflex IDC-1810, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

5. After use, Press the “ON/OFF” key to switch back to sleeping mode.

6. Unplug the unit after every use.

PARAMETER TABLE:

FUNCTION

DEFAULT

(POWER / TEMP)

ADJUSTABLE

(POWER / TEMP)

TIMER

PRESET

TIMER

H POT OT

2000W

200 - 2000W

0:01-4:00

STIR-FRY

600°C

80°C - 600°C

0:01-4:00

BBQ

520°C

80°C - 600°C

0:01-4:00

STEW

1300W

200W - 2000W

0:01-4:00

SOUP

1600W

0:01-24:00

PORRIDGE

1300W

0:01-24:00

WARM

80°C

0:01-24:00

CLEANING AND MAINTENANCE:

1. Turn o the power and pull out the plug before cleanin g.

2. Wait for the unit to cool down before cleaning.

3. Select proper detergent to remove the dirt.

4. Use neat wet cloth to clean the unit after removing the dirt.

5. Do not clean the unit directly with water.

6. Clean the cooking plate and pan before cooking. Otherwise, dirt after charring is dicult to

clean and the plate may get discoloration.

7. You may clean air vent or air entry’s dirt by vacuum cleaner to suck up or by cotton. If there

is dirt with oil, it is right to use toothbrush with a little detergent to clean the surface. Never

clear inside with water or any kind of liquid.

8. Do not use caustic detergents to clean the unit. It may damage the unit by chemical reactio n.

9. Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction

cooker.

TROUBLESHOOTING:

PROBLEM

POSSIBLE CAUSE

RECOMMENDATION

No Power

Indicator

 Power cord not properly plugged

 Kindly make sure that the power cord

is properly plugged

Automatically

switched OFF

 Overload Protection

 No operation for more than 2h rs

 Unplug the unit and wait for about

two minutes before plugging in.

 Bring the unit to the nearest Imarex

Service Center

 Voltage too low

 Unplug the unit and wait for about

two minutes before plugging in.

 Voltage too high

 Unplug the unit and wait for about

two minutes before plugging in.

E3/E5

 Temperature in the cooking plate is

too high

 Wait for a few minutes to let the

cooking plate cool down.

 Bring the unit to the nearest Imarex

Service Center

REMINDER: Please do not forget to ll up and send the warranty card with receipt to our email

address imarexfb@evergoodinc.com

Distributed By: Topgadget Distributions, Inc.

2120 A.linao St., Malate, Manila

Made in China

SPECIFICATIONS:

MODEL NO. : C-1810 ID

RATED VOLTAGE : 230Va.c. 60Hz

POWER CONSUMPTION : 2000 Watts

BOX DIMENSION : ______________

UNIT DIMENSION : ______________

GROSS WEIGHT : ______________

UNIT WEIGHT : ______________

IMPORTANT SAFEGUARD:

When using electrical appliances, basic safety precautions should always be followed, including the

following:

1. Read all instructions carefully.

2. Do not use the Ceramic Cooker on any metal table.

3. Do not use the Ceramic Cooker next to devices, which react sensitively to magnet (e.g. radios, TV,

cassette recorders, etc.).

4. Keep curtains, furniture, ammable materials, etc. away from the Ceramic Cooker and from the

convenience outlet where the Ceramic Cooker is plugged.

5. Before using the Ceramic Cooker, check if the voltage indicated corresponds with the convenience

outlet (230Va.c.)

6. Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be replaced

with the same type and size or bring the Ceramic Cooker to the nearest Authorized Service Center.

7. Do not use a two-way socket with another appliance.

8. Do not place the unit near gas stove, an electric burner, in heated oven or near any hot surface.

9. Do not touch the Ceramic Cooker and the power plug with wet hands.

10. Do not block the ventilation slots of the Ceram Cooker. Keep a minimum distance of 10cm to ic

20cm away from the wall or from other items.

11. The Ceramic Cooker’s surface is made of glass, if damaged, unplug immediately.

12. Do not insert objects like wires or tools into the ventilation slots, this may cause electric shocks.

13. Do not allow the cord to touch the hot surface of the unit.

14. The Ceramic Cooker does not heat up during cooking, but the heat from the cookware may

transferred to in the Ceramic Cooker. Do not touch the hot surface of the glass.

15. Scientic tests have proven that Ceram Cookers are safe to use. However, persons with a ic

pacemaker should keep a minimum distance of 60cm from the unit while using.

16. Do not place any metal kitchen utensils, pan lids, knives or other metal objects on the cooker.

These may heat up when the Ceramic Cooker is ON.

17. Do not place any magnetic objects on the glass surface while the Ceramic Cooker is in use.

18. To protect against electric shock, do not immerse the Ceramic Cooker in water.

19. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliances by person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

20. Do not use the unit if the glass is damaged or has a cracked.

21. is Ceramic Cooker is only intended for tabletop use. Th

22. Do not use the Ceramic Cooker for other than intended use.

23. Not intended for outdoor use.

24. For household use only, not intended for any business purposes.

25. Save this instruction for future references.

DESCRIPTION OF PARTS:

CONTROL PANEL:

HOW TO USE:

1. Plug the unit into the convenience outlet A beep sound will be heard and gital display will be . di

ashing and shows - - - - dicating that the unit is ‘ ‘ in ON.

2. Press ON/OFF button and digital display ws dicating that the unit is in standby mode. sho ‘ON’in

3. Place the cookware into the center of the c king plate. oo

4. Then press FUNCTION to select the desire function.

 Press button FUNCTION once for ‘HOTPOT’ nction. The default power is 2000W and fu

can be adjusted from 200W to 2000W by pressing UP and DOWN

 Press button for nction. The default temperature is 600°C FUNCTION twice ‘STIR-FRY’fu

and can be adjusted from °C to 600°C by pressing UP and DOWN 80

 Press button FUNCTION three times for ‘BBQ’ nction. The default fu temperature is

520°C and can be adjusted from °C to 600°C by pressing UP and DOWN 80

 Press button for nction. The default power is 1300W FUNCTION four times ‘STEW’fu

and can be adjusted from 200W to 2000W by pressing UP and DOWN

 Press button for nction. The default power is 1600W and FUNCTION ve times ‘ ’SOUP fu

it cannot be adjusted

 Press button for nction. The default power is FUNCTION six times ‘ ’PORRIDGE fu

1300W and it cannot be adjusted

 Press FUNCTION button for nction. The default wer is 80°C seven times ‘ ’WARM fu po

and it cannot be adjusted

TIMER SETTING is only applicable for function. HOTPOT, ST -FRY, BBQ and STEWIR

 Select the desired function rst then button . The digital display will press ‘TIMER’ once

be ashing and 0 ault time is 0 minute. Timer can be shows “0: 0” indicating the def

adjusted from 00:01 to 04:00. To conrm the set time, wait until the time steady or stop is

ashing. The timer will start the countdown automatically. If the timer is set “0:00”, the

digital display will ash and the setting will cancel after 10 seconds.

PRESET TIMER is only applicable for SOUP, PORRIDGE and WARM function.

 Select the desired function rst then button . The digital display will press ‘TIMER’ once

be flashing and 0shows “0: 0” indicating the default time is 0 minute. Preset time can be

adjusted from 00:01 to 24:00. To conrm the preset time, wait until the time steady or is

stop ashing. Once the preset time is done, a beep sound will be heard and the selected

function will automatically start If the preset . is set “0:00”, the digital display will flash and

the setting will cancel after 10 seconds.

CHILD-LOCK FUNCTION is to lock all the settings at working mode or “Timer” mode.

Under lock status, ceramic cooker would not respond to any key press.

 After selecting the desired function, button for press and hold the LOCK 3 seconds to

lock, and digital display shows LOC indicating that all the ‘ ’ settings are lock

 To unlock, press and hold LOCK button for 3 seconds

HIGH TEMP. light indicator will light up and digital display will show indicating that ‘HOT’

the cooking plate is hot. Do not touch the cooking plate during cooking process or after

use. It will be extremely hot and may cause burn or injuries. Let the unit cool down before

moving the unit befor cleaning. or e

Produkt Specifikationer

Mærke:	Imarflex
Kategori:	Ikke kategoriseret
Model:	IDC-1810

Har du brug for hjælp?

Hvis du har brug for hjælp til Imarflex IDC-1810 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Imarflex Manualer

Imarflex IMX-300P Manual

4 September 2024

Imarflex SED-5000S Manual

4 September 2024

Imarflex PR-1000D Manual

4 September 2024

Imarflex IMX-250 Manual

4 September 2024

Imarflex IMX-270B Manual

4 September 2024

Imarflex UPS-850G Manual

4 September 2024

Imarflex PR-2000D Manual

4 September 2024

Imarflex IDC-1810 Manual

4 September 2024

Imarflex IDR-8000VA Manual

4 September 2024

Imarflex IMX-345S Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025