Imou Cell Go Full Color Manual

Imou Kamera Cell Go Full Color

Læs gratis den danske manual til Imou Cell Go Full Color (12 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Imou Cell Go Full Color, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Failed to Connect to WiFi During Initial Setup Process

1. Conrm at which Page you failed?

When you see this failure page, it is usually because the device Bluetooth cannot establish good

communication with the mobile phone Bluetooth.

You can try the following steps:

Step 1: Check if the indicator light of the device is ashing green slowly. If it

is not, you can press the device button again to activate the device.

Step 2: Press "Try Again" on the APP interface to try again.

If you still cannot set up successfully, please check the “Reset Guide” and

re-add the device.

You can re-add the device after resetting it:

Step 1: Long press the device button to reset until you hear a beep and the green indicator

light ashes.

Step 2: Press “Add Again” on the APP interface to -re add.

Step 3: Conrm that you are connected to a 2.4GHz WiFi network and enter the correct WiFi

password

If you search for two WiFi with the same name in your WiFi list and one of them is displayed as 5G, do not connect to the 5G

WiFi, select the other one to connect.

If your router is dual-band, you can log in to the router settings on the web, turn o the 5G Wi-Fi switch, and only keep 2.4G

Wi-Fi for connection. After the connection is successful, turn on 5G Wi-Fi again.

Step 4: Conrm that the indicator light of the device is in the green light slow ashing state

during the network conguration process. If it isn’t, you can short press the device button to

activate the device and make the device ash green slowly again.

Step 5: The green light is always on, and the device is successfully connected to the router.

If you still cannot set up successfully, please contact our imou support team and Please

provide a screenshot of your failed interface and indicator status of battery camera.

When you see this failure interface, it is usually caused by the inability to establish a connection between

the device and the cloud platform.

Produkt Specifikationer

Mærke:	Imou
Kategori:	Kamera
Model:	Cell Go Full Color

Har du brug for hjælp?

Hvis du har brug for hjælp til Imou Cell Go Full Color stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Imou Manualer

Imou Cell PT Lite Manual

8 Januar 2025

Imou Ranger Dual 6MP Manual

14 December 2024

Imou Ranger Dual 8MP Manual

14 December 2024

Imou Ranger Dual 10MP Manual

14 December 2024

Imou Cruiser SC 5MP Manual

11 December 2024

Imou Cruiser SC 3MP Manual

11 December 2024

Imou IPC-T22A Manual

14 September 2024

Imou Cell Go Manual

9 September 2024

Imou Cell Go Full Color Manual

5 September 2024

Imou Cell 3C Manual

3 September 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB C22 Manual

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025

Aida HD-NDI-X20 Manual

27 Marts 2025

Marshall Electronics CV228 Manual

12 Marts 2025

AViPAS AV-1180 Manual

12 Marts 2025

Fujifilm FinePix JX500 Manual

14 Januar 2025

Canon WFT-E9 Manual

13 Januar 2025