Indesit DFG 26B1 S UK Manual

Indesit Opvaskemaskine DFG 26B1 S UK

Læs gratis den danske manual til Indesit DFG 26B1 S UK (8 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Indesit DFG 26B1 S UK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

APPLIANCE

PRODUCT DESCRIPTION

1. Upper rack

2. Foldable aps

3. Upper rack height adjuster

4. Upper spray arm

5. Lower rack

6. Cutlery basket

7. Lower spray arm

8. Filter Assembly

9. Salt reservoir

10. Detergent and Rinse Aid dispensers

11. Rating plate

12. Control panel

DAILY REFERENCE

GUIDE

CONTROL PANEL

Before using the appliance carefully read Health and Safety guide.

THANK YOU FOR BUYING A INDESIT PRODUCT.

In order to receive a more complete assistance, please

You can download the Safety Instructions and the

Use and Care Guide, by visiting our website

docs.indesit.eu and following the Instructions on the

back of this booklet.

0000 000 00000

Service:

1. On-O/Reset button

2. Program selection knob

3. Short Time button and indicator light

4. Delayed Start button and indicator light

5. Indicator light Washing and Delayed Start 3h

6. Indicator light Drying and Delayed Start 6h

7. Indicator light Wash Cycle Complete and Delayed Start 9h

8. Start/Pause button and indicator lights

9. Rinse Aid rell indicator light

10. Salt rell indicator light

1 32 4 765 1098

FIRST TIME USE

SALT, RINSE AID AND DETERGENT

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the reta-

ining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and

on the machine’s functional components.

• It is important that the salt reservoir be never empty.

• It is important to set the water hardness.

TThe salt reservoir is located in the lower part of the dishwasher (see

PRODUCT DESCRIPTION) and should be lled when the SALT REFILL in-

dicator light in the control panel is lit.

1. Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2. -Only the rst time you do this: ll the salt re

servoir with water.

3. Position the funnel (see gure) and ll the salt

reservoir right up to its edge (approximately

1 kg); it is not unusual for a little water to leak out.

4. Remove the funnel and wipe any salt residue

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the

procedure before the beginning of the washing cycle.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in

your house. This information can be obtained from your local water

supplier.

The factory setting is for average (3) water hardness.

• Switch on the appliance by pressing the button.ON/OFF

• Switch o the appliance by pressing the button.ON/OFF

• Hold down button START/PAUSE for 5 seconds, until you hear a beep.

• Switch on the appliance by pressing the button.ON/OFF

• The salt indicator light ashes (as many times as the current selection.)

• Set the to the desired hardness level PROGRAM SELECTION knob

number (see WATER HARDNESS TABLE).

• Switch o the appliance by pressing the button.ON/OFF

Setting is complete!

As soon as this procedure is complete, run a program without loading.

Only use salt that has been specically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL indi-

cator light switches o.

If the salt container is not lled, the water softener and the

heating element may be damaged as a result.

Water Hardness Table

Level °dH

German degrees

°fH

French degrees

1 Soft 0 - 6 0 - 10

2 Medium 7 - 11 11 - 20

3 Average 12 - 17 21 - 30

4 Hard 17 - 34 31 - 60

5 Very hard 35 - 50 61 - 90

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser should A

be lled when the RINSE AID REFILL indicator light in the control

panel is lit.

1. Open the dispenser B by pressing and pulling up the tab on the lid.

2. Pour in the rinse aid (max.110 ml), making sure it does not overow

from the dispenser. If this happens, clean the spill immediately with

a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satised with the drying results, you can ad-

just the quantity of rinse aid used.

• Switch the dishwasher on using the button.ON/OFF

• Switch it o using the button.ON/OFF

• Press button

START/PAUSE

three times - a beep will be heard.

• Switch it on using the button.ON/OFF

• The rinse-aid indicator light will ash as many times as the level that

was set.

• Set the level of rinse aid quantity to be supplied using the

PROGRAM SELECTION knob (see PROGRAMS TABLE).

• Switch it o using the button.ON/OFF

Setting is complete!

If the rinse aid level is set to (ECO), no rinse aid will be supplied1 . The

LOW RINSE AID indicator light will not be lit if you run out of rinse aid.

A maximum of 4 levels can be set according to the dishwasher model.

The factory setting is specic to the model, please follow instruction

above to check this for your machine.

• If you see bluish streaks on the dishes, set a low number (2-3).

• If there are drops of water or limescale marks on the dishes, set a

mid-range number (4-5).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device A.

Introduce the detergent into the dry dispenser B only. Place the

amount of detergent for pre-washing directly inside the tub.

1. When measuring out the detergent

refer to the mentioned earlier infor-

mation to add the proper quantity.

Inside the dispenser there are B

indications to help the detergent

dosing.

2. Remove detergent residues from

the edges of the dispenser and clo-

se the cover until it clicks.

3. Close the lid of the detergent

dispenser by pulling it up until the

closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the program.

Produkt Specifikationer

Mærke:	Indesit
Kategori:	Opvaskemaskine
Model:	DFG 26B1 S UK
Bredde:	600 mm
Dybde:	590 mm
Højde:	850 mm
Kontroltype:	Buttons,Rotary
Energieffektivitetsklasse (gammel):	A+
Årligt energiforbrug:	296 kWh
Strømforbrug (slukket):	0.5 W
Placering af apparat:	Fritstående
Installationsrum dybde:	590 mm
Støjniveau:	49 dB
Forsinket start-timer:	Ja
Dør farve:	Sølv
Vaskeklasse:	A
Vandforbrug pr. cyklus:	12 L
Farve på kontrolpanel:	Sølv
Antal kuverter:	13 kuverter
Cyklustid:	200 min.
Opvaskeprogrammer:	Eco,Intensive 65°C,Normal
Halv belastning:	Ja
Tørringsklasse:	A
Årligt vandforbrug:	3360 L
Indikator for afspændingsmiddel:	Ja
Energiforbrug pr. cyklus:	1.039 kWh
Energieffektivitetsskala:	A+++ til D
Produktstørrelse:	Fuld størrelse (60 cm)
Brugerdefineret panel klar:	Ja
Temperatur (maks):	- °C
Saltindikator:	Ja
Øverste kurv indstillelig højde:	Ja
Strømforbrug (fortsat-tændt):	6 W