Indesit IDVL 75 BRS.9 UK Manual

Indesit Tørretumblere IDVL 75 BRS.9 UK

Læs gratis den danske manual til Indesit IDVL 75 BRS.9 UK (16 sider) i kategorien Tørretumblere. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Indesit IDVL 75 BRS.9 UK, eller vil du spørge andre brugere om produktet?

Side 1/16
1
English
Contents
Installation, 2
Warnings, 4
Care and maintenance, 6
Description of the tumble dryer, 7
How to carry out a drying cycle, 9
Programmes and options, 10
Laundry, 13
Troubleshooting, 14
Assistance, 15
GB
Instruction manual
TUMBLE DRYER
This symbol reminds you to read this
instruction manual.
! Keep this manual at hand for immediate reference whenever
necessary. Always store this manual close to the tumble dryer and
remember to pass it on to any new owners when selling or tran-
sferring the appliance, so they may familiarise with the warnings
and suggestions herein contained.
! Read these instructions carefully: the following pages contain
important information on installation and useful suggestions for
operating the appliance.
www.indesit.com
2
GB
Installation
10
m
m
15 mm
15 mm
15 mm
15 mm
B
A
Where to install the tumble dryer
If the dryer is installed below a worktop,
ensure there are 10 mm
between the upper pa-
nel of the dryer and any
objects above it, and 15
mm between the sides
of the machine and the
walls or furniture units
adjacent to it. This ensu-
res adequate air circu-
lation. Make sure the air
inlets on the rear panel are not blocked or
obstructed.
Ventilation
This appliance gently dries laundry by taking in cold, clean
and relatively dry air, heating it and passing it through the
fabric. To facilitate the drying process, damp air is expelled
at the rear, through a ventilation hose. When the dryer is in
use, there has to be adequate ventilation to avoid a back
flow of gases into the room from appliances burning other
fuels, including open fires.
Mobile ventilation system
When using the tumble dryer with the mobile ventilation
system, a ventilation hose must be connected. The hose
should be securely fastened to the ventilation hole at
the rear of the appliance (see “Description of the tumble
dryer”). We recommend the hose is connected to an outlet
near the tumble dryer, if possible. If it cannot be installed
in a permanent spot, the tumble dryer will still function
perfectly well if the ventilation hose is passed through a
partially-opened window.
Make sure you do not point the ventilation hose towards
the air inlet, which is located on the rear of the appliance.
The ventilation hose should not exceed a maximum
length of 2.4 metres; it should also be shaken frequently
to remove any fluff, dust or water deposits inside it. Make
sure you do not crush the hose. The hose supplied has an
oval section to aid installation.
Fixed ventilation kit
We recommend the ventilation hose is connected to a
ventilation for windows or doors, available from the kit
retailer which originally sold you the appliance or from your
local spare parts stockist.
Wall ventilation hole
1. Leave an opening in the wall.
2. Make the hose as short and
straight as possible, in order
to prevent any moisture from
condensing and leaking back
into the appliance.
3. The hole in the wall must
also be straight and pointing
downwards, so that the flow of
air coming out is not impeded.
Areas A and B should be checked frequently, to prevent
the accumulation of fluff or debris, particularly if the tumble
dryer is used very often. The hose adaptor must be fitted
correctly, in order to prevent damp air from coming back
into the room.
Ventilation hole
The ventilation hole should be directly behind the dryer in
order to keep the hose as short as possible.
Make sure you do not push the tumble dryer too far
backwards, as this could lead to the ventilation hose being
crushed, bent or even disconnected.
There should be no cuts, kinks or “U”-shaped bends
in the hose, as these could impede ventilation or trap
condensation.
The end of the hose must be facing downwards, in order to
prevent the hot, damp air from forming condensation in the
room or the tumble dryer.
Make sure that the tumble dryer is adequately ventilated,
and that the end of the ventilation hose is not pointing
towards the air inlet pipe on the rear of the appliance.
The ventilation hose must always be fitted to ensure
optimum performance.
The hose will need to be
expanded to be fitted and
clamped.
Make sure that the ventilation
hose, air inlet vents, and outlets
are not obstructed or blocked.
Do not let the tumble dryer
recirculate exhaust air.
Improper use of the tumble
dryer may result in fire hazards.
Ventilation
The air emitted by the tumble dryer must not be expelled in
the same duct as used for the fumes produced by different
appliances which burn gas or other fuels.
Do not discharge the exhaust air into an extraction system
or any duct with an extractor fan. This will affect the way
the thermal controls operate and can result in a fire hazard.
Make sure that the room in which the
tumble dryer is installed is not damp, and
that it is adequately ventilated.
We do not recommend that the dryer is
installed in a cupboard but the dryer must
never be installed behind a lockable door,
a sliding door or a door with a hinge on the
opposite side to that of the dryer door.
The appliance must be installed with the
rear surface placed against a wall.


Produkt Specifikationer

Mærke: Indesit
Kategori: Tørretumblere
Model: IDVL 75 BRS.9 UK

Har du brug for hjælp?

Hvis du har brug for hjælp til Indesit IDVL 75 BRS.9 UK stil et spørgsmål nedenfor, og andre brugere vil svare dig