Indesit TLA 1 (UK) (0) Manual

Indesit Køleskab TLA 1 (UK) (0)

Læs gratis den danske manual til Indesit TLA 1 (UK) (0) (25 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Indesit TLA 1 (UK) (0), eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/25

FRIDGE

Contents

Installation, 2-4

Positioning and connection

Reversible doors

Description of the appliance, 5

Overall view

Start-up and use, 6

Starting the appliance

Using the refrigerator to its full potential

Maintenance and care, 7

Switching the appliance off

Cleaning the appliance

Avoiding mould and unpleasant odours

Defrosting the appliance

Replacing the light bulb

Precautions and tips, 8

General safety

Disposal

Respecting and conserving the environment

Troubleshooting, 9

Assistance, 10

Operating Instructions

TLA 1

English,1

TLA 1 S

Installation

Your appliance is supplied with a 13amp fused plug that

can be plugged into a 13amp socket for immediate use.

Before using the appliance please read the instructions

below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved

fuse to BS 1362 should always be used and the fuse

cover re-fitted.

If the fuse cover is lost, the plug must not be used until

a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or the

colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug

and you should wish to remove it to add a longer cable

or to re-route the mains cable through partitions, units

etc. please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of

approval.

- The mains cable is wired directly into a

13amp cable outlet, controlled by a

switch (in compliance with BS 5733)

which is accessible without moving the

appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit

your socket. The cable should be cut as close as

possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded

plug into a socket anywhere else.

! Before placing your new appliance into operation please

read these operating instructions carefully. They contain

important information for safe use, for installation and for

care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free

room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of

the appliance and any furniture above it, and at least 5

cm between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied

in the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to

the electricity mains. Before inserting the plug into the

electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with

the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on

the bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values

indicated on the data plate located on the bottom left

side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it (

see Assistance

). Do

not use extension cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

Produkt Specifikationer

Mærke:	Indesit
Kategori:	Køleskab
Model:	TLA 1 (UK) (0)

Har du brug for hjælp?

Hvis du har brug for hjælp til Indesit TLA 1 (UK) (0) stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køleskab Indesit Manualer

Indesit SI8 2Q WD Manual

17 August 2025

Indesit INSZ 10012 Manual

5 August 2025

Indesit IT70 832 S Manual

4 August 2025

Indesit LI6 S2E S Manual

4 August 2025

Indesit IT60 732 W Manual

4 August 2025

Indesit INS 18012 Manual

4 August 2025

Indesit INC18 T112 Manual

4 August 2025

Indesit INS 10012 Manual

4 August 2025

Indesit IB55 732 W UK Manual

29 Juli 2025

Indesit IB55 532 X Manual

16 Juli 2025

Køleskab Manualer

Nyeste Køleskab Manualer

Liebherr CNc 5724 Plus Manual

12 September 2025

Orima ORHC-332-W Manual

12 September 2025

Liebherr FRPSvg 6511 Manual

12 September 2025

Liebherr ICNSd 5123 Plus Manual

12 September 2025

ECG ERB 21880 NXE Manual

12 September 2025

Liebherr FRPSvh 1402 Manual

12 September 2025

Liebherr HMFvh 4001 Manual

12 September 2025

Liebherr FRTSvg 7552 Manual

12 September 2025

Barazza 1FCA6I Manual

12 September 2025

DAYA DDP-541NM2XF0 Manual

12 September 2025