Indesit WIXXL 146 (EU) Manual

Indesit Vaskemaskiner WIXXL 146 (EU)

Læs gratis den danske manual til Indesit WIXXL 146 (EU) (84 sider) i kategorien Vaskemaskiner. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Indesit WIXXL 146 (EU), eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/84
1
GB
Instruction booklet
WASHING MACHINE
WIXXL 146
English
GB
Contents
Installation, 2-3
Unpacking, 2
Remove the transit fixings, 2
Levelling, 2
Water connections, 2
Drainage and electrical connections, 3
Technical Details, 3
Washing machine description, 4-5
Control panel, 4
LEDs, 5
Starting and programmes, 6
Briefly: starting a programme, 6
Programme table, 6
Personalisations, 7
Setting the temperature, 7
Setting the spin speed, 7
Options, 7
Detergents and laundry, 8
Detergent dispenser, 8
Maximum load size, 8
Precautions and advice, 9
General safety, 9
Disposal, 9
Saving energy and respecting
the environment, 9
Care and Maintenance, 10
Switching off the water or electricity supply, 10
Cleaning, 10
Caring for your appliance door and drum, 10
Cleaning the pump, 10
Checking the water inlet hose, 10
Troubleshooting, 11
Service, 12
Before calling for assistance, 12
2
GB
Keep this instruction manual in a safe place for future
reference. Should the appliance be sold, transferred or
moved, make sure the instruction manual
accompanies the washing machine to inform the new
owner as to its operation and features.
! Read these instructions carefully: they contain vital
information on installation, use and safety.
Unpacking
1. Unpack the machine.
2. Check whether the machine has been damaged
during transport. If this is the case, do not install it and
contact your retailer.
Remove the transit fixings
IMPORTANT: Follow these instructions to remove the
TWO transit fixings (see Description for location).
Situated on either side of the
rear panel, BOTH transit boltsBOTH transit boltsBOTH transit boltsBOTH transit boltsBOTH transit bolts
MUST be rMUST be r
MUST be rMUST be rMUST be removed beforemoved befor
emoved beforemoved beforemoved before usee use
e usee usee use.
! Failure to do so may cause
damage to your machine.
It is important the transit bolt
and spacer (see pic) come out
intact.
1. Unscrew the bolt using a
13mm spanner.
2. STOP when 3 threads can be
seen.
3. Hold, slide sideways and pull
to remove.
4. For safety, insert one of the
the plastic covers (supplied with
your machine) over the hole.
! Repeat steps 1 to 4 to remove
the second transit bolt.
! Packaging materials are not
children’s toys.
Levelling
Your machine will be noisy if the two front feet are not
adjusted so that the machine stands firm and level.
! The machine should be levelled from side to side and
from front to back.
1. Move your machine into its final location.
- Take care not to trap or kink
the hoses.
2. Turn one or both front feet
anti-clockwise by hand until the
feet cannot be turned any more.
When adjusting the feet, use a
spirit level to check the machine
stands level, from side to side
and from front to back.
- The spring on each foot will stop them coming loose.
! If it is placed on a fitted or loose carpet, adjust the
feet in such a way as to allow enough room for
ventilation beneath the machine.
Water connection
Connecting the water inlet hose.
Remember that this is a cold-fill machine.
! Check that seal is in place
inside the hose end cap.
Before making the water connections to gas ¾ thread,
allow the water to run freely from the supply tap until it
is perfectly clear.
Screw the inlet end with the blue
cap onto the cold water supply
tap.
Turn the taps on and check for leaks: tighten if
necessary.
! Make sure there are no kinks or bends in the hose.
! The water pressure at the tap must be within the
values indicated in the Technical details table (next
page).
! If the water inlet hose is not long enough, contact a
specialist store or an authorised serviceman.
! Always use new hoses.
! Check the water hose at least once a year, replace
any that are cracked as worn hoses could split under
water pressure.
Installation

Produkt Specifikationer

Mærke: Indesit
Kategori: Vaskemaskiner
Model: WIXXL 146 (EU)

Har du brug for hjælp?

Hvis du har brug for hjælp til Indesit WIXXL 146 (EU) stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vaskemaskiner Indesit Manualer

Indesit

Indesit WN 663 WO Manual

14 Januar 2025
Indesit

Indesit WIL 133 (UK) (CO) Manual

13 Oktober 2024
Indesit

Indesit WISL 105 (PL).1 Manual

12 Oktober 2024
Indesit

Indesit BWA 61052X W IT Manual

9 Oktober 2024
Indesit

Indesit IWC 61281 ECO DE Manual

14 Juli 2024
Indesit

Indesit XWA 91082 Manual

14 Juli 2024
Indesit

Indesit IWE 81283 SL CECO EU Manual

14 Juli 2024
Indesit

Indesit BWE 81483X W FR Manual

13 Juli 2024
Indesit

Indesit ITW E 71252 W Manual

13 Juli 2024
Indesit

Indesit SIXL 126 (EU) Manual

13 Juli 2024

Vaskemaskiner Manualer

Nyeste Vaskemaskiner Manualer

Bosch

Bosch WAQ28440EX Manual

15 Januar 2025
Siemens

Siemens WM14Q472DN Manual

15 Januar 2025
BEKO

BEKO WTV8740A1 Manual

15 Januar 2025
Hoover

Hoover DST 10166PG-80X Manual

15 Januar 2025
Asko

Asko 15605 Manual

15 Januar 2025
Hisense

Hisense WFPV9014EM Manual

15 Januar 2025
BEKO

BEKO WRE 6532 ZSBS Manual

14 Januar 2025
Miele

Miele V 9545 WPS Meteor Manual

14 Januar 2025
Zanussi

Zanussi ZWF 91483 WR LINDO 300 Manual

14 Januar 2025
Corbero

Corbero E-CLA5018W Manual

14 Januar 2025