Inovalley SM121 Manual

Inovalley Vejrstation SM121

Læs gratis den danske manual til Inovalley SM121 (4 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Inovalley SM121, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WIRELESS WEATHER STATION

Ref.: SM121 + SM121-B

- OPERATION INSTRUCTION -

1/ MAIN FUNCTIONS

1. Radio-controlled clock

2. Weather forecast for 4 states: sunny, semi-sunny, cloudy, rainy

3. Seven languages to show the day: English, Germany, French, Italian, Spanish, Dutch, Danish

4. Indoor temperature range: 0°C to 50°C, sampling cycle: 12 seconds

5. Indoor humidity range: 20% to 95%

6. Outdoor temperature/ humidity with RF : up to 3 channels

7. In/out trend indication of temperature/humidity

8. Alarm function for upper or lower limit of outdoor temperature

9. Indication of the comfort index

10. The function of Alarm/ Snooze

11. Summer time

12. Moon phase

2/ POWER-ON AND RESET

2.1 Setting up batteries

a) Open the battery compartment on the back of the station and remove plastic protections of 2 batteries.

b) Place the batteries based polarity, and properly close the door.

c) Then open the door to stack probe back and remove plastic protections of batteries.

d) Place the batteries based on polarity, and properly close the compartment.

e) Then wait for about 7 minutes time is automatically displayed.

Note: for manual tuning, see paragraph 3.3.

2.2 When Power-On and reset, LCD full display for 3 seconds  enter the normal state after “Beep”  check temperature

and humidity

1. The calendar defaults 0:00 January 1, 2004

2. Alarm defaults 0:00

3. The weather icon defaults semi-sunny

4. Temperature scales defaults Celsius degree °C.

5. Time system defaults 24Hr.

3/ INSTRUCTION OF OPERATING THE KEYS

3.1 Key functions

Six functional keys: DOWN, UP, SET, ALARM, CHANNEL, SNOOZE.

English

SET ALARM

DOWN

SNOOZE

CHANNEL

Click Alarm

On/Off 12hr/24hr

switchable

°C/°F

switchable

Enter into

snooze state

Switchable

between CH1,

2 and 3

Standard

mode Hold Enter into

clock

setting

Enter into

alarm setting Clear current

registere CH

Click Confirm

the setting One step

forward One step

backward

SET Hold 8

steps/second 8 steps/second

backward

Click Confirm the

setting One step

forward One step

backward

ALARM Hold 8

steps/second

forward

8 steps/second

backward

Click One step

forward One step

backward Choose the

channel

ALARM

temperature Hold 8

steps/second

forward

8 steps/second

backward

3.2 Normal states

A) Hold “SET” for 2 seconds to enter into time setting

B) Click “ALARM” to switch the alarm on/off

C) Hold “ALARM” for 2 seconds to enter into Alarm setting

D) Press “DOWN” to switch between °C/°F

E) When ALARM rings, click “SNOOZE” to enter into the snooze state every 5 minutes

F) Press “CHANNEL” to switch RF channel, CH1 CH2CH3

G) Hold “CHANNEL” key for 2 seconds to clear out all data of current “CHANNEL”

3.3 Manual time set

1. Hold “SET” key for 2 seconds to enter into time setting

2. The sequence of time setting: Year(2000-2099) Month Date  Language  Hour  Minute  Time zone Exit

3. The figures will flash during the setting.

4. Press “SET” to confirm the setting, and enter the next setting state

5. Press “UP” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will run forward by 8

steps/second.

6. Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

7. Moon phase is changed accordingly

8. The system will exit automatically if no key is operated in 8 seconds.

3.4 Alarm set

A) Hold “ALARM” key for 2 second to enter into alarm setting

B) The sequence of alarm setting: Hour  Minute  exit

C) The figures will flash during the setting.

D) Press “ALARM” to confirm the setting, and enter the next setting state

E) Press “UP” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will run forward by

8 steps/seconds.

F) Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

G) The system will exit automatically if no key is operated in 8 seconds.

4/ FUNCTION AND EFFECT

4.1 The receiving function of RF

A) After installing the battery and checking temperature/humidity, it will enter RF receiving state automatically for 3 minutes.

B) Under normal display mode, hold the “CHANNEL” key for 2 seconds to clear out the channel information

C) If there is no effective signal with same ID code received for the current channel in 35 minutes, the temperature of

that CH will shows “--.-“.

D) The temperature display will resume back when the correct signal is received again

FONCTION

OPERATION

Produkt Specifikationer

Mærke:	Inovalley
Kategori:	Vejrstation
Model:	SM121

Har du brug for hjælp?

Hvis du har brug for hjælp til Inovalley SM121 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation Inovalley Manualer

Inovalley SM121 Manual

22 August 2024

Inovalley SM28 Manual

4 August 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Emos E8610 Manual

15 August 2025

Eurochron EFWS 5500 Manual

15 August 2025

Eurochron EFS 3110A Manual

15 August 2025

MOOOV 477538 Manual

13 August 2025

Hyundai WS 2303 Manual

10 August 2025

TFA 30.3039 Manual

8 August 2025

TFA Linea Plus 35.1144.01 Manual

7 August 2025

TFA 98.1111.02 Manual

7 August 2025

TFA 30.3900.02 Manual

7 August 2025

TFA View 35.1142 Manual

7 August 2025