Klipsch Optimized Mode
"Speaker Combo" is a function that optimizes the crossover value suitable for
Klipsch speakers.
Setting the Klipsch speaker model to be used with "Speaker Combo" updates
the content of "Speaker" - "Crossover" on the Setup menu, and the crossover is
set to the optimized value suitable for the speakers.
• Speaker brands and models that can be set may be updated with the
firmware update. For update details, visit our companyʼs website.
Preparation
The speaker configuration such as the number of speakers and presence/
absence of subwoofer needs to be set before setting the speakers.
When the speaker configuration setting is completed
Proceed to the next "Setup" section.
When the speaker configuration setting is not completed
For automatic setting, select "Miscellaneous" - "Initial Setup" on the Setup menu,
and perform the initial setting of this unit.
For manual setting, select "Speaker" - "Configuration" on the Setup menu, and
set the speaker configuration.
*For details of the setting, refer to the instruction manual.
Setup
1. Press on the remote controller, and select "Speaker" - "Speaker Combo" to
make the settings.
• If "Speaker Combo" is not displayed on the "Speaker" menu, press the
cursor on the remote controller repeatedly and check the next page.
Speaker Combo menu
Setting Item
Default
Value
Setting Details
Brand Other Select a brand of speaker to be used.
Front Other Select a model of speaker to be used.
Center Other Select a model of speaker to be used.
Height Other * Select a model of speaker to be used.
Surround Other Select a model of speaker to be used.
Surround Back Other Select a model of speaker to be used.
Subwoofer Other Select a model of subwoofer to be used.
* If Height Speaker is set to items other than Dolby Speaker for "Speaker" -
"Configuration”
o
n the Setup menu, this setting is fixed to "Other".
2. Press
on the remote controller to return to the previous screen.
3. Select "Crossover" - "Crossover Type” to set the speaker brand to "Klipsch".
4. Press
on the remote controller to finish the setting.
