Intel RS25DB080 Manual

Intel Controller RS25DB080

Læs gratis den danske manual til Intel RS25DB080 (1 sider) i kategorien Controller. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Intel RS25DB080, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

What you will need to begin

• SAS 2.0 or SATA III hard disk drives (backward compatible to support

SAS 1.0 or SATA II hard disk drives)

• Intel® RAID Controller RS25DB080

• Server board with a p1-x8 or p1-x16 PCI Express* slot (this controller is designed to meet

the p1-x8 PCI Express* Generation 2 specification and is backward compatible with

generation 1 slots)

• Intel® RAID Controller RS25DB080 Resource CD

• Operating system installation media: Microsoft Windows Server 2003*,

Microsoft Windows Server 2008*, Microsoft Windows 7*, Microsoft Windows Vista*,

Red Hat* Enterprise Linux, or SUSE* Linux Enterprise Server, VMware* ESX Server 4,

and Citrix* Xen.

Intel is a registered trademark of Intel Corporation or its

subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property

reserved.

Warning

Read all caution and safety

statements in this document

before performing any of the

instructions. Also see the Intel

Server Board and Server Chassis

Safety Information document at:

http://support.intel.com/support/

motherboards/server/sb/cs-010770

.htm for complete safety information.

Warning

Installation and service of

this product should only be

performed by qualified service

personnel to avoid risk of injury from

electrical shock or energy hazard.

Caution

Observe normal ESD

[Electrostatic Discharge]

procedures during system

integration to avoid possible

damage to server board and/or

other components.

Tools Required

Anti-static

wrist strap

Phillips*

screwdriver

Audible Alarm Information

For information about the audible alarm and how to silence or disable it, see the reverse side of this document.

Building Value with Intel

Server Products, Programs and Support

Get the high-value server solutions you

need by taking advantage of the outstanding

value Intel provides to system integrators:

For more information on Intel's added-value

server offerings, visit the Intel ® ServerBuilder

website at: www.intel.com/go/serverbuilder.

• Worldwide 24x7 technical support

(AT&T Country Code + 866-655-6565) 1

• World-class service, including a

three-year limited warranty and Advanced

Warranty Replacement1

• High-quality server building blocks

• Extensive breadth of server building blocks

• Solutions and tools to enable e-Business

• Product information, including

product briefs and technical product

specifications

• Sales tools, such as videos and

presentations

• Training information, such as the

Intel® Online Learning Center

• Support Information and much more

Intel® ServerBuilder is your one-stop

shop for information about all of Intel's

Server Building Blocks such as:

1Available only to Intel® Channel Program

Members, part of Intel® e-Business Network.

Choosing the Right RAID Level

D14

D10

D13

D16

D12

D11

D15

R1 R1

2 NONE Striping (speed) 100% Excellent Excellent High throughput

workstation

21 Mirroring

(redundancy)

50% Very

good

Good OS, apps

entry level

3 1 Striping and distributed

parity (fault tolerance)

n-1

(67-94%)

Very

good

Good Data, web/media

server

3 2 Striping with dual

distributed parity

n-2

(50-88%)

Good Good High fault

tolerance

4 1 per

mirror set

Striping across

mirrors

50% Very

good

Good

6 2 per R6

set

Striping across R6

arrays

n-4

(50-88%)

Very

good

Good Critical data

6 1 per R5

set

Striping across R5

arrays

n-2

(67-94%)

Excellent Very

Good

Database, file,

mail servers

Minimum

Physical

DrivesRAID

Fail PDs

Allowed Method Capacity

Read

Speed

Write

Speed Good Usage

D14

D10

D13

D11

D16

D12

D15

Database, file,

mail servers

For more information on the jumpers referenced in this diagram, refer to user guide located on the web at:

http://support.intel.com/support/motherboards/server.

G22852-001

This guide contains step-by-step instructions for installing

the Intel® RAID Controller RS25DB080 and information on

using the BIOS setup utility to conﬁgure a single logical

drive array and install the driver into the operating system.

These guides and other supporting documents

(including a list of supported server boards) are also located on the web at:

http://support.intel.com/support/motherboards/server.

For more advanced RAID conﬁgurations, or to install with other

operating systems, please refer to the Hardware User’s Guide.

Read all cautions and warnings ﬁrst before starting your RAID Controller integration.

If you are not familiar with ESD (Electrostatic Discharge) procedures used

during system integration, see your Hardware Guide for complete ESD

procedures. For more details on Intel

RAID controllers, see:

www.intel.com/go/serverbuilder.

Intel® RAID Controller RS25DB080

Quick Start User's Guide

1Check the Bracket Height

Determine whether the full-height bracket will fit

in the server’s PCI back plate.

Your RAID controller ships with the full-height

bracket. If the low-profile bracket is required,

unscrew the two fasteners holding the green

board to the silver bracket.

Line up the low-profile bracket with the board,

making sure the two holes align.

Replace and tighten

the two screws.

Remove the bracket.

Full-height

Bracket

Low-profile

Bracket

2Install the RAID Controller

Power down the system and disconnect the

power cord.

Remove the system cover and any

other pieces to access the

PCI Express* slot.

Firmly press the RAID Controller

into an available p1-x8 or p1-x16

PCI Express* Slot.

Secure the RAID Controller bracket

to the system back panel.

PCI Express* Slot (3.3 V)

3Connect the RAID Controller

Connect the wide end of the provided cable to the left silver

connector (ports 0-3).

Push the cable into the silver connector until it makes a slight click.

If using more than four drives, connect the wide end of the second

provided cable to the right silver connector (ports 4-7).

Connect the other ends of the cables to SATA drives or to the ports

on a SATA or SAS backplane.

Notes: Both non-expander backplanes (one cable per drive) and

expander backplanes (one or two total cables) are supported. Drive

power cables (not shown) are required.

Go to Step 4 on Side 2

Rear view of four SATA drives connected to ports 0-3

on the Intel® RAID Controller RS25DB080.

Ports 4-7

Ports 0-3

Intel® RAID Controller RS25DB080 Reference Diagram

Front View Back View

Memory Board

Connector

The Memory Board

is installed on RAID

controller baseboard

by default

Remote battery backup module

SuperCap module connector

J2B1 Ports 0-3

J5B1

Memory Board

Connector

J5A1

J6A1

J2B2 Ports 4-7

Bracket

Screw (2)

Speaker

J2B3

J2B4

x8 PCI

Express*

Interface

Memory Board

Mounting

Holes (4)

J1A7

J1A5

J1A4

J1A2

J1A1

J1A3

Produkt Specifikationer

Mærke:	Intel
Kategori:	Controller
Model:	RS25DB080

Har du brug for hjælp?

Hvis du har brug for hjælp til Intel RS25DB080 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Controller Intel Manualer

Intel SRCU41L Manual

13 August 2024

Intel RCS25ZB040 Manual

10 August 2024

Intel RSP3TD160F Manual

10 August 2024

Intel RS3DC040 Manual

9 August 2024

Intel Storage Adapter RSP3GD016J Manual

9 August 2024

Intel SASWT4I Manual

8 August 2024

Intel RS2WG160 Manual

8 August 2024

Intel RCS25ZB040LX Manual

7 August 2024

Intel RS3P4GF016J Manual

7 August 2024

Intel Storage Adapter RSP3QD160J Manual

6 August 2024

Controller Manualer

Nyeste Controller Manualer

Sonance VC60R Manual

2 April 2025

Trust Mylox GXT 735G Manual

30 Marts 2025

Trust Mylox GXT 735 Manual

30 Marts 2025

American DJ STAGE SETTER-8 Manual

30 Marts 2025

American DJ DP-DMX20L Manual

30 Marts 2025

Visual Productions TimeCore Manual

30 Marts 2025

PCE Instruments PCE-RE22T Manual

28 Marts 2025

Turtle Beach Recon Manual

27 Marts 2025

AMX MU-3300 Manual

26 Februar 2025

PowerA Enhanced Wireless Controller Manual

26 Februar 2025