Intergas Combi Compact HRE 36/30 Manual

Intergas Centralvarmekedel Combi Compact HRE 36/30

Læs gratis den danske manual til Intergas Combi Compact HRE 36/30 (4 sider) i kategorien Centralvarmekedel. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Intergas Combi Compact HRE 36/30, eller vil du spørge andre brugere om produktet?

Side 1/4
Combi Compact
HRE 24/18
HRE 28/24
HRE 36/30
Operating Instructions
Please ask your installer to instruct you on how to fill and bleed the appliance and the
installation and on their operation.
CONTENTS
1 Operation of the appliance 2
1.1 Operation of the central heating .................................................................2
1.2 Operation of domestic hot water supply .....................................................2
2 Operation and display read-out 2
2.1 Operating mode on the service display ......................................................3
2.2 Changing the settings of the various functions ...........................................3
3 Start-up 3
4 Faults 3
5 Filling and bleeding appliance and installation 4
5.1 Central heating system ...............................................................................4
5.2 Domestic hot water supply..........................................................................4
5.3 Frost protection...........................................................................................4
6 Maintenance 4
7 Benchmark Scheme 4
1 OPERATION OF THE APPLIANCE
The purpose of the Intergas Combi Compact HRE wall mounted gas fired boiler is to heat water and to supply it to the central heating
(CH) system and the domestic hot water (DHW) taps. The heat exchanger comprises of two separate systems for central heating and
DHW. The appliance is fitted with a modulating control. This means that the power is adjusted in line with the required heat. The boiler
controller responds to each call for heat from the heating or the DHW system by igniting the burner and monitoring the flame.
1.1 Operation of the central heating
The call for heat arises as a result of the room temperature being lower than the temperature set on the room thermostat. If at that time
the appliance does not have a call for DHW, the appliance comes on in central heating mode. The central heating temperature control
modulates on the basis of the set central heating supply temperature. This means that when the desired central heating supply
temperature is approached the appliance adjusts the power. The pump for the central heating has a post purge period of 1 minute. The
post purge period may be changed if desired. The pump runs automatically for 10 seconds once every 24 hours to prevent blocking.
1.2 Operation of domestic hot water supply
The DHW system is started automatically as soon as more than 2 litres of water per minute are drawn. During delivery of hot tap water
no heat is supplied by the appliance to the central heating system.
For purposes of fast delivery of hot tap water a DHW comfort function has been installed in the controller. This function maintains the
temperature of the heat exchanger. The DHW comfort function has the following settings:
On: ( LED on) The appliance’s DHW comfort function is turned on continuously. In this mode the heat exchanger will be kept on
temperature to assure instant delivery of hot water.
Eco: ( LED on) The appliance’s DHW comfort function is an intelligent system. The appliance will adapt to the pattern of use of hot tap
water. As a result, the temperature of the heat exchanger will only be maintained in periods during which domestic hot water was drawn
on previous days.
Off: (Both LEDs off) The temperature of the heat exchanger is not maintained, as a result of which the delivery of hot tap water takes a
little time. If there is no need for rapid delivery of hot tap water, the DHW comfort function can be switched off.
2 OPERATION AND DISPLAY READ-OUT
Read-out Operation
1 On / off A On / Off button
2
CH operation or setting maximum CH
temperature B DHW / CH button,
for setting desired temperature
3 DHW operation or setting DHW temperature C - button
4 Desired temperature of CH or DHW in °C / CH water pressure (bar) / Fault code/ Time D + button
5 Clock “on” CH enabled E Clock function setting
6 Clock “off” CH disabled F DHW comfort function off / eco / on
7 DHW comfort function eco G Service button
8 DHW comfort function on (continuous) H Reset button
9 Operating code
10 Flashes to indicate fault
2.1 Operating mode on the service display:
Off (appliance frost protection active) Ventilate
Wait mode Ignite
CH pump post run CH mode
Desired temperature reached DHW mode
Self test Heat up appliance
Note: When the red LED above the reset key flashes a fault has occurred. A fault code will then appear on the temperature/clock display.
2


Produkt Specifikationer

Mærke: Intergas
Kategori: Centralvarmekedel
Model: Combi Compact HRE 36/30

Har du brug for hjælp?

Hvis du har brug for hjælp til Intergas Combi Compact HRE 36/30 stil et spørgsmål nedenfor, og andre brugere vil svare dig