IQAir PF40 Manual


Læs gratis den danske manual til IQAir PF40 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25 anmeldelser. Har du et spørgsmål om IQAir PF40, eller vil du spørge andre brugere om produktet?

Side 1/3
105.03.00.07 / 1111
5
2
3
4
1. Filter grille
2. Eight Torx-screws
3. Coarse dust filter pad
4. Second filter grille
5. Four plastic clips
1/3
PF40 Coarse Dust Pre-Filter
Accessory Fitting Instructions
1
To gain access to the base of the IQAir device, carefully
lay the IQAir system on the floor. Do not place the
device onto its side arms. To avoid scratching the IQAir
housing, place the device on a soft surface, such as a
towel.
1Insert the filter grille with the holes along the edge into
the base of the IQAir system.
2
Secure the filter grille with the eight Torx-screws and
screw driver supplied with the installation kit. Ensure that
all screws are tight, but be careful not to over-tighten
the screws.
3The PF40 coarse dust filter pad has a rough, cottony side
and a smooth side. Place the filter on top of the filter
grille with the rough, cottony side facing outward. When
properly installed the rough, cottony side will be facing
the floor when the system is in its upright position.
4
Fitting PF40
105.03.00.07 / 11112/3
Accessory Fitting Instructions


Produkt Specifikationer

Mærke: IQAir
Kategori: Ikke kategoriseret
Model: PF40

Har du brug for hjælp?

Hvis du har brug for hjælp til IQAir PF40 stil et spørgsmål nedenfor, og andre brugere vil svare dig