Irox THERM-ON18 Manual

Irox Luftfugter THERM-ON18

Læs gratis den danske manual til Irox THERM-ON18 (1 sider) i kategorien Luftfugter. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Irox THERM-ON18, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

User Manual

Therm-On18

Getting started

In the Box:

Therm-On18 sensor

2pcs of AA batteries in the sensor

The User Manual

The Therm-On18 is a wireless Thermo Hygrometer

for your Smartphone. It is built for indoor and

outdoor use. The built-in Bluetooth low energy

chipset insures long battery life.

Simply download the free IROX-T App from the

APP STORE or GOOGLE PLAY and you will be

able to display your sensor’s current temperature

and humidity.

Important:

Use only new batteries and never combine old

batteries with new batteries. Observe polarity when

inserting batteries!

Please also remember that used batteries do not

belong in domestic trash, they should be disposed

of at designated collection points. Our environment

will appreciate it!

2. Connecting

Go to settings on your Smartphone and ensure

Bluetooth is enabled.

This means that the batteries in the remote sensor

need to be replaced

Therm-On18 instruction

1. Batteries

Open the battery cover (backside of the sensor, 4

screws) and remove the small plastic strip from the

batteries.

NOTE: After a short while the LED in front of the

Therm-On18 sensor will start flashing indicating

that the sensor is transmitting.

Important note on batteries

• The Therm-On18 is delivered with batteries so

that you can immediately put it into operation.

These batteries may not last as long as store

bought batteries. As soon as you have to replace

the batteries in the remote sensor we recommend

using alkaline batteries. Especially when outdoor

temperatures drop to 0°C (32°F) or below these

batteries will ensure a more reliable transmittal. If

possible even use lithium batteries.

• Never use rechargeable batteries. The output of

rechargeable batteries is often not sufficient for

our devices.

Battery Change

The batteries last for about 8-12 months.

Depending on the batteries used, this time frame

may be a bit shorter or longer. To prevent an

undesired and unexpected interruption of

operation, a battery icon will appear in the channel

display on your smartphone:

7. Care of the device

- Do not expose the device to extreme

temperatures or direct sunlight over longer

periods.

- Avoid blows and shocks of any kind to the device.

- For cleaning use a dry soft cloth that you have

moistened with water and a very mild cleaning

agent. Never use volatile substances such as

benzene, thinner, cleansing agents in spray cans

etc.

- When the device is not being used store it in a dry

area and out of the reach of small children. In

such cases it is important to remove the batteries!

- Please keep the Instruction Manual and other

documents delivered with the device stored

carefully so that you can reference them at a later

point if necessary.

- Important: All disposal fees in Switzerland (vRG)

as well as in the EU (WEEE) for all Irox devices

are covered.

8. Support

This device is a new development of Irox

Development Technology. All information was

made and checked by means of a functioning

device. It may occur that adjustments and

improvements of the device will take place that due

to typographical procedures were not able to be

listed in this manual. Should you notice deviations

which make it difficult for you to operate and use of

the device you may at any time download the latest

manual onto your PC free of charge at

www.irox.com.

Next simply start the IROX-T App on your

smartphone and wait until the sensor automatically

connects. Connecting takes from 1 to 30 seconds.

After the sensor is connected, the current time,

temperature and humidity will be displayed on the

HOME page along with the minimum and maximum

values and, in the humidity window, a text

describing the humidity level:

Low <25%

Normal 25-50%

High >50%

4. View 24-hour sensor history

To view the 24-hour sensor history simply tap the

red temperature window or the blue humidity

window on the HOME page.

On the 24-hour sensor history page, you can see:

a- Temperature: current temperature, dew point

and heat index (only for temperatures above 26°C)

and the minimum, maximum and average

temperature for the last 24 hours and a 24-hour

bar graph.

b- Humidity: current relative humidity, minimum

and maximum for the last 24 hours and a 24-hour

bar graph.

Tap “HOME” to return to the HOME page and

there you may change from Temperature to

Humidity or vice versa. The channel you may

change on all screens by taping on the channel

number at the bottom (1, 2 or 3). This is naturally

only so for the sensors actually present and shown

on the display (see Chapter 5).

Example when channel 1 and 3 are connected

5. Connecting multiple Therm-On18 sensors

The IROX-T App allows you to connect up to three

Therm-On18 sensors simultaneously.

To connect multiple sensors open the battery cover

on the Therm-On18 sensor and ensure that all the

sensors have a different channel. Set the first

sensor to channel 1 and the second to channel 2

and the third to channel 3.

Channel change

- Please select a channel with the sliding switch

- Press RESET to activate the change (e.g. with a

paper clip)

6. Specifications:

Power supply

2 Type LR6 (AA) 1.5 V Batteries

Measuring range outdoor sensor

Temperature: -35C to +70C

Relative air humidity: 30% to 80% RH

Transmission

Transmission Frequency: Bluetooth low energy

Transmission range: up to approx. 50 meter in

open terrain

Works on Bluetooth 4.0 Smart ready devices:

(iPhone 4s or newer, Samsung S4 and HTC One

with 4.2.2 or newer, Nexus 5, iPad 3 or newer,

iPad air, iPad air mini)

3. Link your Therm-On18 to the App

Download the App IROX-T to your device. You will

find this in the APP STORE (for Apple products) or

GOOGLE PLAY (for Samsung and HTC Android

products).

OS Technology AG/SA

CH-3073 Gümligen/Bern

www.ostechnology.ch

KSPO:0142-14 (OST)

iROX NGE76 MANUAL 1(Eng)

Size: W60 x H105(mm)

Material: 80LBS WF-PAP

Printing color: Black(

双面印刷）

BY Lai H Z 1/04/14

2 3

4 5

6 7

8 9

Produkt Specifikationer

Mærke:	Irox
Kategori:	Luftfugter
Model:	THERM-ON18
Type:	Fritstående
Bredde:	60 mm
Dybde:	32 mm
Højde:	110 mm
Indbygget skærm:	Ingen
Opbevaringstemperatur (T-T):	- °C
Forbindelsesteknologi:	Trådløs
Arbejdsområde:	50 m
Formål:	Indendørs/udendørs
Standard grænseflader:	Bluetooth
Temperatur, måleenheder:	°C
Temperatur måleinterval:	-35 - 70 °C
Fugtighed måleinterval:	30 - 80 %