IsoTek EVO3 Polaris Manual

IsoTek Ikke kategoriseret EVO3 Polaris

Læs gratis den danske manual til IsoTek EVO3 Polaris (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om IsoTek EVO3 Polaris, eller vil du spørge andre brugere om produktet?

Side 1/5
INSTALLATION INSTRUCTIONS
EVO3 POLARIS
DO NOT expose this product to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed near the
apparatus. If liquid enters the chassis immediately unplug from
the wall socket.
DO NOT impede ventilation by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.;
DO NOT expose this product to naked flame sources, such as
lighted candles, these should not be placed near the apparatus;
MAKE SURE that this appliance (CLASS 1) is connected to a mains
outlet socket with protective earth.
PLEASE NOTE that the mains plug is used as the disconnect
device and must remain readily operable.
The six output sockets marked ‘A’ are designed for use with all
electronic devices. These sockets are protected by a 10A fuse
(T10AH250) which can be located in the draw tray under the
IEC input.
The rated maximum total load for all six sockets together is
10A, 2300W.
SAFETY FIRST
PLEASE READ THE FOLLOWING INSTRUCTIONS
BEFORE INSTALLATION
OUTPUT SOCKETS
ADDITIONAL INFORMATION ON FUSING AND RATINGS
A
A A A A A A
INSTALLATION INSTRUCTIONS
EVO3 POLARIS
UNPACK
1
/
РАСПАКОВКА
DEBALLAGE / AUFPACKEN / DESEMBALAR /
1.5Kg
2
INPUT
NAZ
480mm
80mm
45mm
PLUG IN
/ ПОДКЛЮЧЕНИЕ К СЕТИ
BRANCHEMENT SECTEUR / EINSTECKEN / CONECTAR /


Produkt Specifikationer

Mærke: IsoTek
Kategori: Ikke kategoriseret
Model: EVO3 Polaris

Har du brug for hjælp?

Hvis du har brug for hjælp til IsoTek EVO3 Polaris stil et spørgsmål nedenfor, og andre brugere vil svare dig