James 101SA-6 Manual

James Subwoofer 101SA-6

Læs gratis den danske manual til James 101SA-6 (1 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om James 101SA-6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

The Small Aperture (SA) placeholder serves as a trim kit template, to aid in properly

sizing cuts of the surface material, and it also protects the SA’s port from any debris

from entering the enclosure during the construction phase.

20180409

SMALL APERTURE

PLACE DHOL ER

Sheetrock Trim Kit Installation:

First, choose the placeholder that matches your trim kit, round/square, and mount it to the SA

cabinet. Next cut a hole in the sheetrock just large enough to accommodate the placeholder

and install the sheetrock over the SA cabinet. If done properly, only the MDF placeholder will be

visible when sheetrock is installed. Now, remove the MDF placeholder and attach the sheetrock

trim kit to the SA’s enclosure. Insert the provided foam piece into the center hole of the

the trim kit and any required spacers in place. Making sure to mud up to the rim of the trim kit

install the speaker module and grille into the exposed port to complete the installation.

First, choose the placeholder that matches your trim kit, round/square, and mount it to the SA's

cabinet. Next cut a hole in the surface material just large enough to accommodate

placeholder and install the trim kit and any required spacers, speaker module, and grille into the

exposed port to complete the installation.

Produkt Specifikationer

Mærke:	James
Kategori:	Subwoofer
Model:	101SA-6
Materiale:	Aluminium
Impedens:	8 ohm (Ω)
Subwoofer RMS-effekt:	350 W
Subwoofer frekvensomrpde:	33 - 150 Hz
Subwoofer, følsomhed:	87 dB
Subwoofer dybde:	136.53 mm
Subwoofer bredde:	304.8 mm
Subwoofer vægt:	19960 g
Subwoofer højde:	1270 mm