JBL CINEMA SB100 Manual

JBL Soundbar CINEMA SB100

Læs gratis den danske manual til JBL CINEMA SB100 (7 sider) i kategorien Soundbar. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 23 anmeldelser. Har du et spørgsmål om JBL CINEMA SB100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

CINEMA SB100

powered soundbar speaker

quICk-StArt guIdE

thANk You For ChooSINg thIS JBL®

ProduCt

The JBL Cinema SB100 powered soundbar speaker is a complete,

integrated sound system that will dramatically improve the sound

of programs you watch on your television. It can mount on a wall

or sit on a shelf and includes all of the cables you need to connect

it to your TV and your cable/satellite tuner or disc player.

We’re confident that this JBL system will provide every note

of enjoyment that you expect – and that when you think about

purchasing additional audio equipment for your home, car or

office, you will once again choose JBL products.

This quick-start guide contains all the information you need to set

up, connect and adjust your new speaker system. For more in-

depth information, go to our Web site: www.jbl.com.

INCLudEd ItEMS

BASS

SouNdBAr rEAr-PANEL CoNtroLS ANd

CoNNECtIoNS

Power Switch

Power Cord

Connector

Subwoofer

Output Connector

EQ Switch

Optical Input

Connector

Aux Input

Connector

Subwoofer Output connector: If you are using a powered subwoofer

(not supplied) with your soundbar, connect it here. This Note:

connector outputs a low-pass filtered signal, so connect it to an input

on your subwoofer that bypasses the subwoofer’s built-in crossover

network. Consult your subwoofer’s owner’s manual for instructions

about connections and adjustments.

EQ switch: Use this switch to adjust the soundbar’s bass for either wall

or table mounting. If you’re mounting the soundbar on a wall with the

included wall-mount bracket, set the EQ switch to the “Wall” position

for the most natural-sounding bass performance. If you are placing the

soundbar on a table, set the EQ switch to the “Table” position for the

most natural-sounding bass performance.

Optical Input connector (digital): If your TV, disc player or cable/

satellite tuner has an optical digital output, use the included optical

cable to connect it here.

NOTE: You can connect different source components to the analog and

digital connections.

Aux Input connection (analog): Use the included stereo 3.5mm to

stereo RCA audio cable to connect the stereo analog outputs of your

TV, disc player or cable/satellite tuner here.

Power switch: Set this switch to the “On” position to activate the

soundbar. In normal operation, this switch will be left in the “On”

position. See

Turning the Soundbar On and Off

, on page 5, for more

information.

Power Cord connector: Connect the included power cord here. See

Power Connections

, on page 5, for more information.

IMPORTANT: Do not connect the power cord to an AC outlet until you

have made and verified all other connections.

If you will not be using the soundbar for an extended period – for

instance, if you’re going on vacation – set the Power switch to the “Off”

position.

SouNdBAr toP-PANEL CoNtroLS ANd

rEMotE CoNtroL

Volume

Buttons

Source

Button

Surround

Button

Power

Button

BASS

Volume Buttons

Surround Mode

Button

Power Button Mute Button

Bass Boost

Button

Source Button

Power button: To turn the soundbar on when it is in the Standby

mode, press the Power button on either the soundbar or the remote.

(The Power indicator will turn white.) To put the soundbar in the

Standby mode, press either Power button while the system is on.

(The Power indicator will turn amber.) If you do not press the Power

button, the soundbar will automatically go into the Standby mode

approximately 10 minutes after the audio signal ceases.

NOTE: If you put the soundbar into the Standby mode by pressing

the Power button, you must manually turn it on by pressing the Power

button again. If the soundbar automatically goes into the Standby

mode 10 minutes after the audio signal ceases, it will automatically

turn on whenever the soundbar detects an audio signal at either input

connection.

Mute button (remote control only): Press the Mute button to mute

the soundbar. (The Volume +/– indicators both illuminate white.) While

the system is muted, press the Mute button again or either Volume

button to restore the sound.

NOTE: Pressing both of the soundbar’s Volume buttons at the same

time while the system is on will mute the system. Pressing either

Volume button while the system is muted will restore the sound.

Surround Mode button: This button turns the soundbar’s HARMAN

Display Surround processing on and off. The Surround button indicator

turns amber when HARMAN Display Surround is active, and turns white

when HARMAN Display Surround is not active (normal stereo sound).

See

Surround Mode Buttons

, on page 6, for more information.

Volume Up/Down buttons: Press the “+” button to increase the

volume; press the “–” button to decrease the volume. The buttons

illuminate white for a few seconds after being pressed.

Source Selector button: This button switches between the sources

connected to the Aux (analog) and Optical (digital) inputs. When the Aux

input is active, the Source indicator turns white; when the Optical input

is active, the Source indicator turns amber.

Bass Boost button (remote control only): Press the remote’s

Bass Boost button to enhance low-frequency performance. Pressing

the Bass Boost button again will return the soundbar’s normal low-

frequency performance.

Produkt Specifikationer

Mærke:	JBL
Kategori:	Soundbar
Model:	CINEMA SB100
Vekselstrømsindgangsspænding:	100-240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Brugervejledning:	Ja
Produktfarve:	Sort
FM radio:	Ingen
Udgangseffekt (RMS):	- W
Strømforbrug (standby):	0.5 W
Strømforbrug (typisk):	30 W
Hurtig start guide:	Ja
Kabler inkluderet:	AC, AUX
Fjernbetjening inkluderet:	Ja
Anbefalet brug:	TV
Frekvensområde:	80 - 18000 Hz
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	2.0 kanaler
Strømkilde:	Vekselstrøm
AUX-indgang:	Ja
Antal drivere til diskant:	2
Modtager inkluderet:	Ingen
Plug and play:	Ja
Diskant diameter:	1.5 "
Antal bashøjttalerdrev:	2
Woofer diameter:	77 mm
Kampatibilitet med Apple-docking:	Ikke understøttet
Subwoofer inkluderet:	Ingen
Soundbar vægt:	3800 g
Woofer diameter (britisk mål):	3 "
Digital akustisk og optisk indgang:	1
Soundbar dimensioner (BxDxH):	810 x 92 x 108 mm