2
Important Safety Instructions
1. Please read and keep all safety and user instructions.
2. This product is intended for installation by professional installers only! This document is intended to provide professional
installers with basic installation and safety guidelines for this product in typical fixed-installation systems. Please read
this document and all safety warnings before attempting installation. Do not attempt to service this product yourself.
Refer all servicing to authorized service centers, installers, technicians, dealers or distributors. To contact Harman
Professional or to find a dealer or distributor near you, visit
https://www.jblpro.com.
3. The products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s
responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all
applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before
installing this product.
4. Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage.
It is the installer’s responsibility to evaluate the reliability of any mounting method used for their application. Only
professional installers with the knowledge of proper hardware and safe mounting techniques should attempt to install
any loudspeaker overhead.
5. Do NOT make unauthorized alterations to this product.
6. Only use the mounting hardware supplied with this product.
7. Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or
plumbing. If you are not sure about installing the bracket, contact a qualified professional installer. Ensure the bracket is
installed according to local building codes.
8. Do not use hydrocarbon based solvents, lubricants or cleaning agents of any type on or around this speaker, and
associated mounting hardware, during installation. The use of such hydrocarbon based lubricants, solvents or cleaning
agents on or around the mounting anchors and screws can lead to degradation of the plastic material, possibly resulting
in cracking and premature failure of the product.
9. Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or
near the product.
10. The loudspeaker and all mounting components must be inspected annually by a qualified professional who is trained
and certified in suspending loudspeaker systems. All rigging parts and components used in the suspension of the
loudspeaker system should be visually inspected for signs of cracking, bending, water damage, corrosion, de-lamination,
or any other condition that could compromise the system's integrity and create a dangerous falling hazard.
11. Prolonged exposure to excessive SPL can cause hearing damage! The loudspeaker is easily capable of generating sound
pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production crew, and audience
members. Caution should be taken to avoid prolonged exposure to SPL in excess of 90 dB.
