JBL Grand Touring GTO5060 Manual

JBL Modtager Grand Touring GTO5060

Læs gratis den danske manual til JBL Grand Touring GTO5060 (8 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om JBL Grand Touring GTO5060, eller vil du spørge andre brugere om produktet?

Side 1/8
GTO4060
GTO2060
car audio
power
amplifier
owner’s manual
INSTALLATION
2
THANK YOU
for purchasing a JBL GTO amplifier. In
order that we may better serve you should
you require warranty service for your new
amplifier, please retain your original pur-
chase receipt and register your new JBL
amplifier online at www.jbl.com.
WARNING
Playing loud music in an automobile
can hinder your ability to hear traffic and
permanently damage your hearing. We
recommend listening at low or moderate
levels while driving your car. JBL accepts
no liability for hearing loss, bodily injury or
property damage resulting from the use or
misuse of this product.
IMPORTANT
To get the best performance from your
JBL GTO amplifier, we strongly recommend
that installation be entrusted to a qualified
professional. Although these instructions
explain how to install GTO amplifiers in a
general sense, they do not show specific
installation methods that may be required
for your particular vehicle. If you do not
have the necessary tools or experience,
do not attempt the installation yourself.
Instead, please ask your authorized JBL
car audio dealer about professional
installation.
INSTALLATION
WARNINGS AND TIPS
Always wear protective eyewear when
using tools.
Turn off the audio system and other
electrical devices before you start.
Disconnect the (–) negative lead from
your vehicle’s battery.
At the installation sites, locate and
make a note of all fuel lines, hydraulic
brake lines, vacuum lines and electrical
wiring. Use extreme caution when cut-
ting or drilling in and around these areas.
Check clearances on both sides of
a planned mounting surface before
drilling any holes or installing any
screws. Remember that the screws
can extend behind the surface.
Before drilling or cutting holes, use a
utility knife to remove unwanted fabric
or vinyl to keep material from snagging
in a drill bit.
When routing cables, keep input-signal
cables away from power cables and
speaker wires.
When making connections, make
certain they are secure and properly
insulated.
If the amplifier’s fuse must be replaced,
use only the same type and rating as
that of the original. Do not substitute
another kind.
CHOOSING A LOCATION
AND MOUNTING THE
AMPLIFIER
Choose a mounting location in the trunk
or cargo area where the amplifier will not
be damaged by shifting cargo. Amplifier
cooling is essential for proper amplifier
operation. If the amplifier is to be installed
in an enclosed space, make sure there is
sufficient air circulation for the amplifier
to cool itself.
When mounting the amplifier under a
seat, ensure that it is clear of all moving
seat parts and does not affect the seat
adjustments. Mount the amplifier so it
is not damaged by the feet of backseat
passengers. Make sure that the amplifier
is mounted securely using nuts and bolts
or the supplied mounting screws.
Mount the amplifier so that it remains
dry – never mount an amplifier outside
the vehicle or in the engine compartment.


Produkt Specifikationer

Mærke: JBL
Kategori: Modtager
Model: Grand Touring GTO5060

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL Grand Touring GTO5060 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Modtager JBL Manualer

JBL

JBL DCR 600 II Manual

24 Juli 2025
JBL

JBL GTR-1001 Manual

24 Juli 2025
JBL

JBL AVR480 Manual

23 Juli 2025
JBL

JBL DCR 600 Manual

23 Juli 2025
JBL

JBL AVR580 Manual

23 Juli 2025
JBL

JBL M3 Manual

21 Juli 2025
JBL

JBL M1 Manual

21 Juli 2025
JBL

JBL DA850 Manual

21 Februar 2025
JBL

JBL DA1650 Manual

21 Februar 2025

Modtager Manualer

Nyeste Modtager Manualer