JBL GSB12 Manual

JBL Højttaler GSB12

Læs gratis den danske manual til JBL GSB12 (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om JBL GSB12, eller vil du spørge andre brugere om produktet?

Side 1/8
Installation Guide
GSB8 & GSB12 -In Ground Landscape Subwoofers
CAUTION: Installation must be done by qualified persons using safe
installation standards.
The installer is responsible for proper and selection and use of hardware to
install the speakers in a safe and durable manner.
Wire Connection
CABLE-- B - 1- - - s The GS speakers come with a captive multi conductor meter long cable with bare wire end for connection via an
external installer-provided weather proof - junction box.
o Connection Method Use professional wire nuts or other safe, long- term connectors that are appropriate for the
installation conditions and that are sized properly for wire gauge(s) and number of wires to be connected for the
together in the connector.
Important: Cut off all unused wires in a way that ensures that none of them will short to any of the
other wires.
Δ Code Requirements -- Typical wiring entails - -protected connections inside installer provided water
proof junction box, with cable entering junction box via water-tight fitting that is sized appropriately for
wire jacket diameter (see However, always wire in accordance with code requirements. below).
CABLE
BASE PLATE with TABS 4 x EDGE
CABINET
PORT CAP
PORT
HANDLES (x2)
o Color Connection Code
Low- Impedance (6, for GSB8 and GSB12)
Black N (- P = egative ) and Red = ositive (+)
High-Impedance (70V or 100V distributed systems):
Wiring Charts:
GSB8
Cable Wire Color
↓ Ω -For Low Z Input (6 )
Blue
N/C
Black
From Amp – (negative)
Black with White Stripe
N/C
Gray
N/C
Green
N/C
Yellow
N/C
Red
From Amp + (positive)
N/C = No Connection. Cut, insulate and tie
GSB12
Cable Wire Color
↓ Ω For -Low Z Input (6 )
Blue
N/C
Black
From Amp – (negative)
Black with White Stripe
N/C
Gray
N/C
Green
N/C
Yellow
N/C
Red
From Amp + (positive)
N/C = No Connection. Cut, insulate and tie
Instructions:
o For high- impedance systems (70V/100V), tie together Blue and Black and insulate
this connection.
o Common (negative from amplifier) = Black with white stripe
o GSB8 -- Positive (positive from amplifier):
Gray = 25W @ 70V or 50W @ 100V
Green = 50W @ 70V or 1 00W @100V
Yellow = 100W @ 70V ( )N/C at 100V
o GSB12 -- Positive (positive from amplifier):
Gray = 50W @ 70V or 100W @ 100V
Green = 100W @ 70V or 200W @100V
Yellow = 200W @ 70V (N/C at 100V)
o Wire Gauge – 4 The wire gauge is 1 AWG (approx. 1.6 mm2) , UL1569. The cable jacket diameter is 11 mm (0.43 in.).


Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: GSB12

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL GSB12 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler JBL Manualer

JBL

JBL Stage 250 Manual

7 April 2025
JBL

JBL Conceal C62 Manual

7 April 2025
JBL

JBL Conceal C83 Manual

7 April 2025
JBL

JBL SCL-2 Manual

4 April 2025
JBL

JBL PRX935 Manual

25 Februar 2025
JBL

JBL PRX925 Manual

25 Februar 2025
JBL

JBL 4349 Manual

11 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer