JBL GSF3 Manual

JBL Højttaler GSF3

Læs gratis den danske manual til JBL GSF3 (6 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om JBL GSF3, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
Installation Guide
GSF3 & GSF6 Landscape Speakers
CAUTION: Installation must be done by qualified persons using safe
installation standards.
The installer is responsible for proper selection and use of mounting hardware
and processes to install the speakers in a safe manner.
Wire Connection
• CABLE-- - - - The GSF speakers have a captive 1 meter long cable for bare wire connection via an external installer provided
weather proof- junction box.
o Polarity -- – . The red wire is + (positive) and the black wire is (negative)
o Wire Gauge – 1 The wire gauge is 18 AWG ( mm2).
o Wire Jacket – - The wire jacket is 5 mm (+0/ 05.mm) in diameter.
o Connecting -- Use proper wire nuts or other safe connectorsprofessional that are appropriate for the installation
conditions and that are sized properly for wire gauge(s) and number of wires to be connected together in the
connector.
o Routing – - - When using the ground stake or L bracket base, the cable can be routed through the base.
Black - = (negative)
Red = + (positive)
CABLE
Bare-Wire End of Cable
Setting TAP SELECTOR SWITCH
(TAP SELECTOR SWITCH is located on the bottom of the speaker enclosure)
• Rotate bottom- : panel TAP SELECTOR SWITCH to select between
o GSF3:
8 - ) Ω(ie, low impedance / direct
15W or 7.5W for either 70V or 100V distributed speaker system
3.75W for 70V distributed speaker system only
o GSF6:
8 - Ω(ie, low impedance / direct)
30W or 15W for either 70V or 100V distributed speaker system
7.5W for 70V distributed speaker system only
Installing GROUND OUDSPEAKER-STAKE BASE or L BRACKET BASE - to L
• The speaker comes with both a GROUND-STAKE BASE and an L-BRACKET BASE. Use whichever one applies to the installation
requirements of the project.
• At the bottom of the LOUDSPEAKER there is a SOCKET. Three come with the speaker (packaged in a separate - rhead set sc ews
pouch) for attaching the chosen base into the SOCKET.
o Screw Dimensions -- – , GSF3: M4 x 0.7 5mm with 3 mm hex drive
GSF6: M4 x 0.7 – 9 , mm with 3 mm hex drive
(GSF SPEAKER shown with L-BRACKET BASE)
(continued ↓)
ROTARY TAP SELECTOR SWITCH

Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: GSF3

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL GSF3 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler JBL Manualer

JBL

JBL L100 Classic MkII Manual

4 Juni 2025
JBL

JBL Stage3 9637F Manual

3 Juni 2025
JBL

JBL Stage 250 Manual

7 April 2025
JBL

JBL Conceal C62 Manual

7 April 2025
JBL

JBL Conceal C83 Manual

7 April 2025
JBL

JBL SCL-2 Manual

4 April 2025
JBL

JBL PRX935 Manual

25 Februar 2025
JBL

JBL PRX925 Manual

25 Februar 2025
JBL

JBL Cinema Sound CS6100 Manual

11 Februar 2025
JBL

JBL 4349 Manual

11 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Ecler

Ecler eMOTUS5O16 Manual

16 Juni 2025
Defender

Defender Q5 Manual

16 Juni 2025
BOGASING

BOGASING M5 Manual

16 Juni 2025
Sony

Sony BRAVIA Theatre Sub 7 Manual

16 Juni 2025
Sogo

Sogo SS-8395 Manual

15 Juni 2025
Gembird

Gembird SPK-BT-LED-08S Manual

15 Juni 2025
Teufel

Teufel Rockster NEO Manual

15 Juni 2025
Rebeltec

Rebeltec Stage 180 Manual

15 Juni 2025
Diamond Audio

Diamond Audio DES69C Manual

15 Juni 2025
Defender

Defender Enjoy S1000 Manual

15 Juni 2025