JBL SB300 Manual

JBL Højttaler SB300

Læs gratis den danske manual til JBL SB300 (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17 anmeldelser. Har du et spørgsmål om JBL SB300, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
1X
1X
Included Items
thank You For choosIng thIs
JBl ® Product
The SB300 is a two-piece home theater speaker system that
includes a powered stereo soundlbar speaker, a wireless 8-inch
(200mm), 100-watt powered subwoofer and all of the cables you
need to connect the soundbar to your TV and your cable/satellite
tuner or DVD player. Both components feature the dynamic new
JBL Weave design for a distinctive, one-of-a-kind look.
We’re confident that this JBL system will provide every note
of enjoyment that you expect – and that when you think about
purchasing additional audio equipment for your home, car or
office, you will once again choose JBL products.
This quick-start guide contains all the information you need to set
up, connect and adjust your new speaker system. For more in-
depth information, go to our Web site: www.jbl.com.
sB300
powered soundbar with powered subwoofer
quick-start guide
1X
1X
On/O ff
Stereo
Aux
Input
Vol.+
Vol.–
Mute
Surround
Digital
Input
2X
2X
2
SOUNDBAR TOP-PANEL CONTROLS AND
REMOTE CONTROL
Power Button: To turn the system on when the soundbar is in the
Standby mode, press the Power button on either the soundbar or
the remote. (The Power indicator will turn blue.) To put the system
in the Standby mode, press either Power button while the system is
on. (The Power indicator will turn amber.) The subwoofer will remain
on for approximately one minute after the soundbar goes into the
Standby mode. If you do not press the Power button, the soundbar
and the subwoofer will both automatically go into the Standby mode
approximately 15 minutes after the audio signal ceases.
NOTE: If you put the soundbar into the Standby mode by pressing
the Power button, you must manually turn it on by pressing the Power
button again. If the system automatically goes into the Standby
mode 15 minutes after the audio signal ceases, it will automatically
turn on whenever the soundbar detects an audio signal at the input
connection that was last used.
Mute Button (remote control only): Press the Mute button to
mute the SB300 system. (The Power indicator flashes blue.) While
the system is muted, press the Mute button again or the Volume Up
button to restore the sound.
NOTE: Momentarily pressing the soundbar’s Power button while the
system is on will mute the system. Momentarily pressing the button
while the system is muted will restore the volume.
Power
Button
Surround-
Mode Button
Volume Up/
Down Buttons
Source Selector
Button
Power
Indicator
Surround-Mode
Indicator
Source
Indicator
Surround Mode Button: This button turns the SB300 system’s
3-D Surround processing on and off. The Surround Mode indicator
turns blue when 3-D Surround is active, and turns white when 3-D
Surround is not active (normal stereo sound). See
Surround Mode
Buttons
, on page 6, for more information. NOTE: The remote control
has individual buttons for the Stereo and 3-D Surround modes.
Volume Up/Down Buttons: Press the “+” button to increase the
volume; press the “–” button to decrease the volume.
Source Selector Button: This button switches between the sources
connected to the Source 1 (analog) and Source 2 (digital) inputs.
When Source 1 is active, the Source indicator turns white; when
Source 2 is active, the Source indicator turns blue.
NOTE: The remote control has an individual button for each input
source.
On/Off
Stereo
Aux
Input
Vol.+
Vol.–
Mute
Surround
Digital
Input
Power
Button
Volume Up/Down
Buttons
Source Selector
Buttons
Mute
Buttons
Surround-Mode
Buttons
soundBar rear-Panel controls and
connectIons
Wireless Pairing Switch: Press this switch to initiate wireless pairing
between the soundbar and the wireless subwoofer. See
Pairing the
Units for Wireless Operation
, on page 6, for more information.
EQ Switch: Use this switch to adjust the soundbar’s bass for either
wall or table mounting. If you’re mounting the soundbar on a wall with
the included wall-mount brackets, set the EQ switch to the “Wall”
position for the most natural-sounding bass performance. If you are
placing the soundbar on a table, set the EQ switch to the “Table”
position for the most natural-sounding bass performance.
Aux Input Connection (analog): Use the included stereo audio
cable to connect the stereo analog outputs of your TV, DVD player or
cable/satellite tuner here.
Optical Connection (digital): If your TV, DVD player or cable/satellite
tuner has an optical digital output, connect it here.
NOTE: You can connect different source components to the analog
and digital connections.
Power Cord Connector: Connect the included power cord here. See
Power Connections
, on page 5, for more information.
IMPORTANT: Do not connect the power cord to an AC outlet until you
have made and verified all other connections.
Power Switch: Set this switch to the “On” position to activate the
soundbar. In normal operation, this switch will be left in the “On”
position. See
Turning the Soundbar On and Off
, on page 6, for more
information.
If you will not be using the soundbar for an extended period – for
instance, if you’re going on vacation – set the Power switch to the
“Off” position.
Wireless
Pairing Switch
Analog (AUX) Input
Connections
Power
Switch
EQ Switch Optical Digital Input Connector Power Cord Connector

Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: SB300

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL SB300 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler JBL Manualer

JBL

JBL Radiance 502VX Manual

24 Juli 2025
JBL

JBL SoundPoint SP8II Manual

24 Juli 2025
JBL

JBL L5 Manual

24 Juli 2025
JBL

JBL Studio L226C Manual

23 Juli 2025
JBL

JBL Cinema Sound CS480 Manual

23 Juli 2025
JBL

JBL J1000MV Manual

23 Juli 2025
JBL

JBL SoundPoint SP6CII Manual

23 Juli 2025
JBL

JBL Northridge E90 Manual

23 Juli 2025
JBL

JBL K2 S5800 Manual

23 Juli 2025
JBL

JBL L3 Manual

23 Juli 2025

Højttaler Manualer

Nyeste Højttaler Manualer

SoundTube

SoundTube RF31-EZ-T Manual

30 Juli 2025
Valcom

Valcom VIP-480AL-W-SA Manual

30 Juli 2025
Rockustics

Rockustics StoneHenge II-S/T Manual

30 Juli 2025
Valcom

Valcom InformaCast VIP-428A-IC Manual

30 Juli 2025
Valcom

Valcom InformaCast VIP-431A-IC Manual

30 Juli 2025
Electro-Voice

Electro-Voice Evid 4.2T Manual

30 Juli 2025
Audiocase

Audiocase S10 Manual

30 Juli 2025
JLab

JLab JBuds Party Manual

30 Juli 2025
Valcom

Valcom InformaCast VIP-411A-IC Manual

30 Juli 2025
FoneStar

FoneStar MOV-684PR-L Manual

30 Juli 2025