JBL VP7212/95DPC Manual

JBL Højttaler VP7212/95DPC

Læs gratis den danske manual til JBL VP7212/95DPC (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om JBL VP7212/95DPC, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Key Features:
Powered bi-amplified full-range
loudspeaker with JBL DrivePack®
technology for portable or installed
use
2200 watts peak output power,
1100 watts continuous
12-inch Differential Drive®
low-frequency driver for extended
low-frequency output
90° x 50° coverage
Stylized and ergonomically designed
powder-coated die cast aluminum
handles
Six 3-inch fly track suspension points
and fourteen M10 fittings (optional
detachable flying fittings and forged
eye bolt kits available)
Optional DPDA digital audio input
modules available for HiQnet™
network control
Applications:
High-impact audio/visual
presentations
Theatrical sound design
Houses of Worship
Sound reinforcement rental companies
Live performance venues
Performing arts centers
Corporate learning centers
Themed entertainment venues
The VP7212/95DP is a powered
12" 2-way integrated loudspeaker
system featuring 2200 watts of peak
output power, 1100 watts continuous,
and onboard digital signal processing.
Designed in cooperation with Crown
International, the JBL DrivePack®
DP-2 features leading-edge
technology such as patented high
efficiency Class-I power amplifier
technology. Network control and
monitoring is optionally available via
System Architect software.
VP7212/95DP transducers are JBL’s
2262G 12" diameter Differential
Drive®woofer and the JBL 2452H-SL
large format 1.5" exit compression
driver. The high frequency driver is
coupled to a JBL PT-H95HF
Progressive Transition (PT)
Waveguide for excellent 90° x 50°
pattern control, smooth frequency
response, and low distortion. Easily
rotated for horizontal or vertical
system orientation.
Specifications:
Frequency Response (+/-3 dB): 63 Hz - 18 kHz
Frequency Range (-10 dB): 47 Hz - 20 kHz
Coverage Pattern: 90° x 50° rotatable waveguide
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 136 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262G, 304 mm (12 in) dia.,76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 4 ohms
High Frequency: JBL2452H-SL, 100mm (4 in) titanium damped diaphragm,
1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DP2 Internal Amplification Output
(at nominal load) 2200 Watts Peak, 1100 Watts Continuous
DP2 Output (Continuous IEC shaped pink
noise into rated load impedance): 750LF/350HF Watts
DP2 Output Section: 2-Channel, Class I
Audio Input connector XLR with loop-through
Network control connector Ethernet, RJ45 (DPDA options)
Signal Processing: DSP based, resident in Input Module. See page 2 For
input module specifications.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: Auto Select 90-132VAC/216-264VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 6 standard air-cargo 3 in. track and 14 M10 fittings.
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 701.8 x 383.8 x 523.5 mm
27.63 x 15.11 x 20.61 in.
Net Weight: 35.4 kg (78 lbs.)
1Measured with IEC shaped noise in free field conditions.
Powered 12"
2-Way Integrated
Loudspeaker System
VP7212/95DP
VP7212/95DPDA (Optional DrivePack Digital Audio Input Module)
VP7212/95DP Powered 12" 2-Way Integrated Loudspeaker System
DPDA (Optional HiQnet Network Input Module with AES Digital Audio)
The DPDA module adds AES/EBU digital audio input capability with analog audio
backup, BSS Omnidrive HD digital signal processing and LevelMax multi-stage limiting.
Its 100 Mb Ethernet networking (with daisy-chain capability), allows for Remote Control
and Monitoring via HiQnet System Architect™ software. A rotary mechanical encoder
allows for array identification and box positioning.
Available monitoring functions include: audio input type, AES lock, input signal level,
clip and gain reduction; ready / temp status; individual channel load status, signal level,
clip and gain reduction; event logging and user alert messaging. Available remote control
functions include: input type (analog or AES), input connector (XLR or Ethercon), input
level, input polarity and mute; input compressor attack/release, ratio and makeup gain;
individual channel gain and mute. Twenty, type-selectable input filters (10 System and 10
Guest filters) are available for system equalization along with user-adjustable input delay
of up to 2 seconds and sub filter access (user-adjustable low pass filter for subwoofer
systems; high pass filter for full-range systems). Signal generator functions (sine wave,
swept tone, pink or white noise) are available to facilitate system testing and up to fifty
presets can be stored internally. In addition, Master Control Panels and Master Monitor
Panels allow for convenient grouping of control and monitoring functions for multiple
DPDA equipped DrivePack enclosures, providing a powerful control/monitoring interface
for large format line array or subwoofer systems. See JBL DPDA specification sheet for
more information on DPDA input modules.
DPIP ( on-networked dbx Input Module with basic functionality)N
The standard DPIP input module features analog audio inputs and sophisticated onboard
digital signal processing technology. Precision bandpass filtering, limiting, time alignment,
component equalization and automatic self-test functions ensure optimized performance.
Rear panel controls include a 32-position detented rotary attenuator calibrated in 0.5 dB
steps, providing a 16 dB range of control. The “Enable Subwoofer Filter” button is a
momentary-contact switch that enables or disables an 80 Hz filter. For subwoofer systems,
the low-pass frequency is set to 80 Hz when selected or 100 Hz when deselected. For
full-range systems, the high-pass frequency is raised to 80 Hz when the “Enable
Subwoofer Filter” button is selected.
JBL DrivePack®enclosures are equipped with a modular input bay that accepts either DPDA or
DPIP input modules. Speaker-dependent processing such as crossover filtering and component
equalization, time alignment and protection are not user-configurable. Options are available for
connectivity, audio signal path and control functionality.
AES/Analog
AES/Analog
AES/Ethernet
AES/Ethernet
DPDA INPUT MODULE BLOCK DIAGRAM

Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: VP7212/95DPC

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL VP7212/95DPC stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler JBL Manualer

JBL

JBL Club 1200D Manual

7 September 2025
JBL

JBL Studio 625C Manual

2 September 2025
JBL

JBL L110A Manual

16 August 2025
JBL

JBL J2050 Manual

16 August 2025
JBL

JBL ARC90 Manual

16 August 2025
JBL

JBL L112 Century 2 Manual

16 August 2025
JBL

JBL L19 Manual

16 August 2025
JBL

JBL L96 Delta Manual

15 August 2025
JBL

JBL L50 Manual

15 August 2025
JBL

JBL L112 Manual

15 August 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Adam

Adam T7V Manual

12 September 2025
Klipsch

Klipsch Flexus SURR 100 Manual

12 September 2025
Klipsch

Klipsch Detroit Manual

12 September 2025
Adam

Adam A3X Manual

12 September 2025
Adam

Adam A7X Manual

12 September 2025
Focal

Focal 1000 IW6 Manual

12 September 2025
QSC

QSC SC-423C Manual

11 September 2025
QSC

QSC AcousticDesign AD-S282H Manual

11 September 2025
Monitor Audio

Monitor Audio Bronze 200 AV 5.1.2 Manual

11 September 2025
Focal

Focal 1000 IWLCR Utopia Manual

11 September 2025