JennAir MKC4157ES Manual

JennAir Magnetron MKC4157ES

Læs gratis den danske manual til JennAir MKC4157ES (20 sider) i kategorien Magnetron. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7 anmeldelser. Har du et spørgsmål om JennAir MKC4157ES, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

INSTALLATION INSTRUCTIONS

BUILT-IN MICROWAVE OVEN KIT

INSTRUCTIONS D’INSTALLATION

ENSEMBLE FOUR À MICRO-ONDES

ENCASTRÉ

This product is suitable for use above electric built-in ovens or warming drawers. This product is not suitable for use below cooktops.

This Built-In Kit is designed for use with Jenn-Air Microwave Oven model specifying JMC3415ES Built-In Kit on the serial tag on the

front of the microwave oven.

These Installation Instructions cover different models. The appearance of your particular model may differ slightly from the illustrations

in these Installation Instructions.

Please read these instructions thoroughly before beginning installation.

Ce produit est conçu pour être installé au-dessus d’un four électrique encastré ou d’un tiroir-réchaud. Ce produit n’est pas conçu

pour être installé sous une table de cuisson. L’ensemble four à micro-ondes encastré est conçu pour être utilisé avec les modèles

de fours à micro-ondes Jenn-Air dont la plaque avant avec numéro de série indique le numéro d’ensemble encastré JMC3415ES.

Ces instructions d’installation couvrent plusieurs modèles. L’apparence de votre modèle peut différer légèrement des illustrations

présentes dans ce manuel.

Lire ces instructions attentivement avant de commencer l’installation.

IMPORTANT:

Save for local electrical inspector’s use.

IMPORTANT :

À conserver pour consultation par l’inspecteur

local des installations électriques.

NOTE: Do not remove protective ﬁlm from trim kit frame before

installing ducts and other mounting hardware. Only remove ﬁlm

just before installing trim on cabinet.

REMARQUE : Ne pas retirer le ﬁlm de protection du cadre de

la trousse de garniture avant l’installation des conduits et de la

quincaillerie de ﬁxation. Enlever le ﬁlm juste avant l’installation

du cadre sur le placard.

W10781779A

Table of Contents/Table des matières

BUILT-IN MICROWAVE OVEN SAFETY ........................................2

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts .............................................................................2

Location Requirements ................................................................3

Minimum Dimensions...................................................................3

Product Dimensions .....................................................................5

Electrical Requirements ...............................................................5

INSTALLATION INSTRUCTIONS ...................................................6

Install Rear and Top Ducts ...........................................................6

Install Rails and Bottom Duct ......................................................7

Install Microwave Oven and Trim Kit Frame ................................8

Complete Installation ...................................................................9

To Remove Trim Kit Frame ...........................................................9

ASSISTANCE ..................................................................................9

SÉCURITÉ DU FOUR À MICRO-ONDES ENCASTRÉ ..............10

EXIGENCES D’INSTALLATION ...................................................10

Outils et pièces ...........................................................................10

Exigences d’emplacement .........................................................11

Dimensions minimales ...............................................................11

Dimensions du produit ...............................................................13

Spéciﬁcations électriques ..........................................................13

INSTRUCTIONS D’INSTALLATION .............................................14

Installer les conduits arrière et supérieur ...................................14

Installer les rails et le conduit inférieur .......................................15

Installer le four à micro-ondes et le cadre

de la trousse de garniture ..........................................................16

Terminer l’installation ..................................................................17

Enlever le cadre de la trousse de garniture ...............................17

ASSISTANCE 17 ................................................................................

BUILT-IN MICROWAVE OVEN SAFETY

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting

installation. Read and follow the instructions provided

with any tools listed here.

Tools Needed

■Phillips #2 screwdriver

■Measuring tape

■Combination square/straight edge

■Pencil

■Drill (for wall cabinet installations)

■■Z\zn" (0.16 cm) drill bit (for wall cabinet installations)

■6" (15.2 cm) level

Parts Supplied

Check that all parts are included.

#8-14 x " screws (20)Z\x

Duct 1 (1) Duct 2 (1)

Duct 3 (1) Duct 4 (1)

Duct 5 (1)

Mounting Rails (2)

Trim Kit Frame (1)

Shims (1 pack)

#10- " x " self-drilling screw (2)C\v B\zn

Bottom Duct Attachment

Bracket (2)

Bottom Duct (1)

NOTE: #8-14 x " screws will come in 2 separate packages.Z\x

Produkt Specifikationer

Mærke:	JennAir
Kategori:	Magnetron
Model:	MKC4157ES

Har du brug for hjælp?

Hvis du har brug for hjælp til JennAir MKC4157ES stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Magnetron JennAir Manualer

JennAir JMCTC15RB Manual

8 Januar 2025

JennAir YJMHF930RSS Manual

3 Januar 2025

JennAir JMW2430IL Manual

16 August 2024

JennAir JMC2427IM Manual

15 August 2024

JennAir JMDFS24GL Manual

14 August 2024

JennAir MKC3157ES Manual

14 August 2024

JennAir JMC3415ES Manual

13 August 2024

JennAir JMDFS30HL Manual

13 August 2024

JennAir JMV9196CB Manual

12 August 2024

JennAir MK2160AS Manual

12 August 2024

Magnetron Manualer

Nyeste Magnetron Manualer

Smeg FMIA120B3 Manual

1 April 2025

Candy CMGA 30DBST Manual

29 Marts 2025

Candy CAMW25X Manual

29 Marts 2025

Hisense H25MOBS7HUK Manual

29 Marts 2025

Toshiba MWP-MM20P(WH) Manual

27 Marts 2025

Whirlpool WMN461BXF Manual

4 Marts 2025

LG MSER1130B Manual

3 Marts 2025

Hotpoint HCW6O7HTS Manual

27 Februar 2025

Hotpoint HCW607HT Manual

27 Februar 2025

Hotpoint HMD44MXUK Manual

27 Februar 2025