Jensen JPORT Manual


Læs gratis den danske manual til Jensen JPORT (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Jensen JPORT, eller vil du spørge andre brugere om produktet?

Side 1/1
JPORT Installation Instructions
Existing Radio
(Not Included)
1. Choose a mounting location on the dashboard that will allow enough room
behind the dash to run the JPORT cables to the existing car radio.
2. Drill a 3/4" hole in the dashboard.
3. Remove the hexagonal nut from the JPOR T.
4. Insert the RCA cable ends through the hole in the dashboard from the front.
5. Replace hexagonal nut on the back side of the dashboard
and secure the JPORT to the dashboard.
6. Plug the RCA cables into the RCA-IN jacks on your existing car radio.
7. Plug a device with a 3.5 mm jack into the JPORT to test the connections.
8. Replace the dashboard components.
Radio's
Auxilliary Input
JPORT
White Washer
Hexagonal Nut
Dashboard
3.5 mm Jack MP3 Player
(Not Included)
4 - Foot Cable with 3.5mm Male Jacks (Included)
Made in China/Printed in China
3/4 Inch
Recommended Size
for Mounting Hole


Produkt Specifikationer

Mærke: Jensen
Kategori: Ikke kategoriseret
Model: JPORT

Har du brug for hjælp?

Hvis du har brug for hjælp til Jensen JPORT stil et spørgsmål nedenfor, og andre brugere vil svare dig