JETI MUI50 EX Manual

JETI Radiostyret legetøj MUI50 EX

Læs gratis den danske manual til JETI MUI50 EX (4 sider) i kategorien Radiostyret legetøj. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om JETI MUI50 EX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Sensor MUI EX

-1-

Assignment of the MUI sensor is measurement of voltage, current and consumed capacity of ﬂight

batteries in the model. The wireless data transmission by the DUPLEX 2,4GHz system is monitored by

the JETIBOX terminal.

For communication purposes the Duplex system takes advantage of the 2,4 GHz band, which besides

sending remote control data to the model also receives data from the model back to the transmitter.

During ﬂight obtained telemetric data are transmitted in real time and the actual values of the measured

data can be displayed on the JETIBOX LCD. Telemetric MUI sensors execute voltage and current

measurements in your model and transmit these informations with the aid of the DUPLEX system

(receivers and transmitter modules). Thanks to exact current measurements these sensors render it

possible to trace the spent capacity of the measured battery. The MUI unit is recording the spent current

ﬂow time and its average as well as maximum value. Furthermore it oﬀers exact voltage measurements

and recordings of voltage minimum and maximum values.

The task of parameter adjustment and measured data setup is performed by the well known alround talent

– the JETIBOX terminal.

MUI sensors allow setting of acoustical signals in order to announce violation of set parameters. Such

alarms may be set for measurements of maximum current and minimum voltage as well as for a

maximum of consumed battery capacity. The sound signal is generated by a siren integrated in the

transmitter module. For better diﬀerentiation are the particular alarms distinguished by Morse alphabetic

letters. The acoustical alarm generation in case of parameter violation is working even if the JETIBOX is

not connected. With the JETIBOX in place the LCD display shows which parameter has been violated. In

case of violation of several parameters the alerts alter consecutively as well as the indications on the LCD

display.

Technické parametry

MUI 30

MUI 50

MUI 75

MUI 150

MUI200

Dimensions [mm]

20 x 16,5 x 5

27 x 19 x 11

27x19x11

Weight

10 g

19 g

21 g

25 g

30g

Range of measured voltage

0 60 V –

Range of measured current

0 30 A –

0 50 A –

0 75 A –

0 150 A –

0 200 A –

Accuracy of voltage

measurment

0,1 %

Accuracy of current

measurment

1 %

Operation temperature

- 10 to + 85° C

Supply voltage

5 8,4V –

Sensor internal consumption

24 mA

32 mA

32mA

Menu of the telemetric MUI Sensor

Take advantage of the JETIBOX for parameter adjustment and data readout. After connection to the MUI

sensor the sensor identiﬁcation is shown and in the second line the preadjusted actual measured data. By

long pushing down button R (right) a fast deletion of all measured parameters can be triggered (min. and

max. voltage, max. current, average current, runtime, capacity). Fast deletion is indicated in the ﬁrst line

of the display by an asterix „*“.

By pushing the push button D (downward arrow) of the JETIBOX you will enter the MUI sensor menu.

MUI MENU : Actual Value –by pushing D (downward arrow) you will select the display of actual

measured values

Volt / Current – displays actual measured voltage and the current passing through the sensor. By

simultaneously pushing arrows R and L (right and left) the zero value of the sensor current is calibrated.

To the actual measured current value the zero current display is added, i. e. the so called zero shift.

Capacity shows the actual consumed capacity –

Run Time shows the total time of current passage through the sensor. Included is also the time when the –

current has exceeded the adjusted current value in the Start Trigger Setting menu.

Sensor MUI EX

-2-

MUI MENU: MIN / MAX by pushing the button D (downward arrow) you will select the display of –

extreme voltage and current value recordings which occurred during the measurement. The extreme

recordings are deleted automatically or they can be deleted in the menu Automatic Setting - Erase Data.

deletion occurs when the MUI sensor has just been connected to the voltage supply and the current, as set

in the menu will be exceeded. If after connection of the sensor the set current will Setting-Start Trigger,

not be exceeded, values of the previous sensor operation will be displayed.

U MIN / MAX shows the minimum and maximum value of the measured voltage –

I AVG / MAX shows the average value of the measured current and its maximum –

MUI MENU: Setting by pushing the button D (downward arrow) you will enter the basic sensor setup –

Start Trigger setup of a current value, at which after sensor connection recording of values like –

minimum, maximum and current transit time starts. If the adjusted value is 0 A, values will be recorded

immediately after connection of the sensor to its power supply and data read out of the previous operation

will not be possible.

Erase Data by pushing arrows R and L (right and left) simultaneously the records of measured –

parameters will be deleted

First Parametr adjustment of the display of the ﬁrst parameter in the JETIBOX LCD, which is shown –

in the second line of the basic sensor menu (the first line shows the identiﬁcation, for instance SENSOR

MUI 30)

Second Parametr - adjustment of the display of the second parameter in the JETIBOX LCD, which is

shown in the second line of the basic sensor menu (the ﬁrst line shows the identiﬁcation, for instance

SENSOR MUI 30)

Auto. Erase - This function of automatical deletion after overstepping the trigger level can be activated or

deactivated.

MUI MENU: ALARMS by pushing button D (downward arrow) you enter setup of particular alarms. –

If one of the adjusted parameters becomes exceeded, the JETIBOX LCD will in the second line of the

basic menu alternately show the original display with the pertinent alarm and the transmitter module siren

will emit an acoustical alarm. The ﬁrst tone is a revelation signal and the second one is signalling a Morse

Code character of the relevant alarm. If the alarm is set to OFF, this kind of alarm will be switched oﬀ.

Voltage alarm (alarm U ) adjustment of the value of voltage signalling, if the measured voltage –..-

decreases beyond the set value, the voltage alarm U will be activated.

Current alarm – (alarm I ) adjustment of the value of current signalling, if the measured current ..

increases beyond the set value, the current alarm I will be activated.

Capacity alarm (alarm C ) adjustment of the signalling value of consumed capacity , if the –-.-.

adjusted value of maximum consumed capacity is exceeded, alarm C will be activated.

MUI MENU: SERVICE by pressing button D (arrow down) you will change to depiction of the –

ﬁrmware version and to renewal of the sensor default setting.

Factory Defaults by simultaneous pressing of arrows R and L (right and left) the factory settings of the –

MUI are loaded.

MUI v. xx.xx ID xxxxx:xxxxx product marking with ﬁrmware version and series number (ID). –

Particular phases of current measurements

A when after switching on of the sensor the –

current did not exceed the set value Start Trigger.

Measured values (U MIN / MAX, I AVG / MAX,

Capacity, Run Time) correspond with measured

values of the previous operation.

B the value has been exceeded –Start Trigger .

Previous measured values (U MIN / MAX, I AVG /

MAX, Capacity, Run Time) will be deleted and

actualized by the actual measurement course.

Produkt Specifikationer

Mærke:	JETI
Kategori:	Radiostyret legetøj
Model:	MUI50 EX

Har du brug for hjælp?

Hvis du har brug for hjælp til JETI MUI50 EX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Radiostyret legetøj JETI Manualer

JETI TD1609S Manual

21 August 2024

JETI JDEX-RR7 Manual

21 August 2024

JETI JEX-MF2G-800 Manual

21 August 2024

JETI Central Box 220 Manual

21 August 2024

JETI MEZON 75 opto (RPM) Manual

21 August 2024

JETI Central Box 210 Manual

21 August 2024

JETI Duplex Rsat 2 EX Manual

21 August 2024

JETI JM-090-L Manual

20 August 2024

JETI TD0905L Manual

20 August 2024

JETI AddCAP 1640 Manual

20 August 2024

Radiostyret legetøj Manualer

Nyeste Radiostyret legetøj Manualer

Silvergear RC Dino Manual

17 Juni 2025

FMS 1/18 FCX18 Chevrolet K10 V2 Manual

16 Juni 2025

Amewi 21108 Manual

15 Juni 2025

Amewi 21107 Manual

10 Juni 2025

Amewi 21106 Manual

8 Juni 2025

ECX 1.9 4WD Barrage 01009 Manual

7 Juni 2025

ECX Kickflip 00010 Manual

4 Juni 2025

ECX 1/10 2WD Circuit 03130T2 Manual

2 Juni 2025

ECX AMP Crush Manual

2 Juni 2025

ECX Ruckus 03009 Manual

2 Juni 2025