JETI TD1609S Manual


Læs gratis den danske manual til JETI TD1609S (7 sider) i kategorien Radiostyret legetøj. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 28 anmeldelser. Har du et spørgsmål om JETI TD1609S, eller vil du spørge andre brugere om produktet?

Side 1/7
Manual DITEX-Manager
© 2016 Hacker Motor GmbH 1 Side
Manual Soware DITEX-Manager
With this guide, we show you how the soware DITEX manager should be applied in individual servo
programming. The soware can be download from www.Ditex-Servo.com. For more informaon,
please visit www.Ditex-Servo.com, Hacker-Motor.com or our YouTube video channel.
To program a Ditex servo rst install the soware. For programming the servos the USB interface
(Hacker part number 87201006) is required.
Open the soware and connect the USB interface to your computer. The LED of the interface lights
up green when the connecon is successful. Thereaer, plug the servo to the interface and the so-
ware will open automacally. The servo conrms this with a tone sequence.
If you click the "queson mark" in the top left to open the main menu
of the soware, there are some basic sengs of the soware that can
be changed .
Here you can change the language.
In the Sound menu, the sound of the software can be changed or turned o
The design of the soware can be chosen to your own preferences
Here you can load the update to the currently connected servo.
When pressing this buon, the Manager is restored to the original state.
General informaon
Any changes that need to be performed on the servo-soware have to be conrmed by
Otherwise the sengs will be not saved in the servo!
Manual DITEX-Manager
© 2016 Hacker Motor GmbH 2 Side
SETUP
Adjusng the servo center posion .
Maximum travel A
Maximum travel B
max. Limit travel A
max. Limit travel B
Changing servo direcon
The mode "NARROW" is for specic applicaons that require a higher drive
frequency. For all other applicaons u the "NORMAL" mode. se
Adjust the servo-speed
Possibility of reducing the maximum servo-torque
The servo drives for the set me is with full torque, this allows a more sensi-
tive control to the zero posion.
Here you can choose how the servo on disconnuaon of the servo pulses
should behave by the receiver. This mode is only acve when an interrup-
on of the signal cable, or if the receiver is in acve fa -safe with no servo il
output pulses.
Servo-speed to the specied fail-safe posion.
Posion where the servo drives when signal loss. ,


Produkt Specifikationer

Mærke: JETI
Kategori: Radiostyret legetøj
Model: TD1609S

Har du brug for hjælp?

Hvis du har brug for hjælp til JETI TD1609S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Radiostyret legetøj JETI Manualer

JETI

JETI TD1609S Manual

21 August 2024
JETI

JETI JDEX-RR7 Manual

21 August 2024
JETI

JETI JEX-MF2G-800 Manual

21 August 2024
JETI

JETI JM-090-L Manual

20 August 2024
JETI

JETI TD0905L Manual

20 August 2024
JETI

JETI AddCAP 1640 Manual

20 August 2024

Radiostyret legetøj Manualer

Nyeste Radiostyret legetøj Manualer