JL Audio XD400/4v2 Manual

JL Audio Modtager XD400/4v2

Læs nedenfor 📖 manual på dansk for JL Audio XD400/4v2 (20 sider) i kategorien Modtager. Denne guide var nyttig for 29 personer og blev bedømt med 4.6 stjerner i gennemsnit af 15 brugere

Side 1/20
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 4431100 during business hours.
OWNER’S MANUAL
400W 2/3/4 Channel Amplier
2 | JL Audio - XD400/4v2 Owners Manual
PROTECT YOUR HEARING!
We value you as a long-term customer. For
that reason, we urge you to practice restraint in
the operation of this product so as not to damage
your hearing and that of others in your vehicle.
Studies have shown that continuous exposure to
high sound pressure levels can lead to permanent
(irreparable) hearing loss. This and all other
high-power amplifiers are capable of producing
such high sound pressure levels when connected
to a speaker system. Please limit your continuous
exposure to high volume levels.
While driving, operate your audio system in
a manner that still allows you to hear necessary
noises to operate your vehicle safely (horns,
sirens, etc.).
SERIAL NUMBER
In the event that your amplifier requires
service or is ever stolen, you will need to have
a record of the products serial number. Please
take the time to enter that number in the space
provided below. The serial number can be found
on the bottom panel of the amplifier and on the
amplifier packaging.
Serial Number:
INSTALLATION APPLICATIONS
This amplifier is designed for operation in
vehicles with 12 volt, negative-ground electrical
systems. Use of this product in vehicles with
positive ground and/or voltages other than 12V
may result in damage to the product and will void
the warranty.
This product is not certified or approved for
use in aircraft.
Do not attempt to “bridge” the outputs of this
amplifier with the outputs of a second amplifier,
including an identical one.
Input Mode
2 Ch. |
4 Ch.
All | 3&4
1&2 | Sum
Preouts From Remote Level Mode
4 Channel Amplifier
Rem. |
Oset | Signal
Input Voltage
Low | High
Turn-On Mode
Status
LED
(pg. 11)
Ch. 1 & 2 Filter
Frequency
Selector
(pg. 8)
Ch. 1 & 2
Filter Mode
Selection
(pg. 8)
Ch. 1 & 2 Input
Sensitivity Control
(pg. 7)
Remote
Level Mode
Switch
(pg. 9)
Input
Mode
Switch
(pg. 7)
Pre-Out Signal
Selection Switch
(pg. 9)
Input
Voltage
(pg. 7)
Turn-On
Mode
(pg. 6)
Ch. 3 & 4 Filter
Frequency
Selector
(pg. 8)
Ch. 3 & 4
Filter Mode
Selection
(pg. 8)
Ch. 3 & 4 Input
Sensitivity Control
(pg. 7)


Produkt Specifikationer

Mærke: JL Audio
Kategori: Modtager
Model: XD400/4v2

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio XD400/4v2 stil et spørgsmål nedenfor, og andre brugere vil svare dig