Winegard Boost XT Pro BT-1000 Manual

Winegard Modtager Boost XT Pro BT-1000

Læs gratis den danske manual til Winegard Boost XT Pro BT-1000 (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Winegard Boost XT Pro BT-1000, eller vil du spørge andre brugere om produktet?

Side 1/2
a
CONTENTS:
USB cable
preamplifier
110V power adapter
signal meter (power inserter)
TV
ANT
COAX CABLE
TO ANTENNA
Use provided cable ties
to secure preamplifier
to the mast.
preamplifier
INSTALLATION
1
SCAN QR Codes below to download the
Winegard App
2
SELECT Don’t have an account?”
Fill out info and CLOSE the app. An
email confirmation will be sent. Confirm
the email (required). Open app and log in.
3
CONNECT the preamplifier to the antenna
and signal meter using coax cables (not
included). Turn on the signal meter by
connecting it to an outdoor power outlet
or power bank. The TV doesn’t need to be
connected to the signal meter during initial
antenna setup.
4
SCAN the QR code
on the signal meter.
Position antenna to
receive the maximum
number of free channels.
Allow six to twelve
seconds between each re-positioning.
HINT:
Different views are available: a top-down view
of broadcast towers in your area, a full list of actual
channels your antenna detects, and a signal strength
view to help fine-tune a specific channel if necessary
.
5
POSITION and tighten the antenna for
best reception. Move signal meter inside
and connect to the TV. Provide power to
the signal meter (a). Run a channel scan
on the TV.
Not provided: coax cables, mast
IMPORTANT:
Work with a buddy! One person
adjusts antenna, second person relays results.
Smart Preamplifier Quick Start Guide
TO TV
TO INDOOR
OUTLET
COAX CABLE TO TV
OR
TO POWER BANK
SET UP ONLY
HINT:
If the signal meter and smartphone/app are > 30 ft
apart, use a power bank (not included) or extension cord.
signal meter
Printed in U.S.A. © 2022 Winegard Company
Rev 2-23 2452453
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google LLC. The Bluetooth word mark and
logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Winegard is under license. Winegard is a registered
trademark of Winegard Company.
Winegard Company 2736 Mt. Pleasant St. | Burlington, IA 52601
For help, email help@winegard.com or call 1-800-288-8094
Register your product at: www.winegard.com/support
SCAN
FOR
WARRANTY
OR CALL
800-288-8094
MORE
PRODUCT
INFORMATION


Produkt Specifikationer

Mærke: Winegard
Kategori: Modtager
Model: Boost XT Pro BT-1000

Har du brug for hjælp?

Hvis du har brug for hjælp til Winegard Boost XT Pro BT-1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig