Joy-It SEN-KY052 Manual


Læs gratis den danske manual til Joy-It SEN-KY052 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 83 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 42 anmeldelser. Har du et spørgsmål om Joy-It SEN-KY052, eller vil du spørge andre brugere om produktet?

Side 1/9
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
TEMPERATURE AND AIR PRESSURE SENSOR
SEN-KY052
1. GENERAL INFORMATION
Dear customer,
Thank you very much for choosing our product. In the following we will
show you what has to be observed during commissioning and use.
Should you encounter any unexpected problems during use, please feel
free to contact us.
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
2. USAGE WITH THE RASPBERRY PI
2.1 Installation
First you need to install git and pip on your Raspberry Pi, this works with
the following commands:
sudo apt-get install git
Now you can download and install the required librarys for the sensor as
follows:
sudo pip3 install adafruit-circuitpython-bmp280
sudo apt-get install python3-pip
sudo pip3 install adafruit-circuitpython-lis3dh
2.1.1 Installation SPI
To use the sensor with SPI, you must first activate the SPI interface.
To do this, enter the following command:
sudo raspi-config
Now navigate to 3 Interfacing Options -> P4 SPI and enable the SPI in-
terface.
Now you need to reboot your Raspberry Pi with the command:
sudo reboot
Now open the configuration of the Raspberry Pi and activate I2C as
follows:
sudo raspi-config
sudo apt-get install -y python-smbus
sudo apt-get install -y i2c-tools
Now enter the following commands for installing the I2C interface:
2.1.2 Installation I2C
Now navigate to 3 Interface Options -> P5 I2C and enable the I2C inter-
face.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: SEN-KY052

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It SEN-KY052 stil et spørgsmål nedenfor, og andre brugere vil svare dig