Juniper SSG-140-SH Manual

Juniper Ikke kategoriseret SSG-140-SH

Læs gratis den danske manual til Juniper SSG-140-SH (82 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Juniper SSG-140-SH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/82

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, CA 94089

USA

408-745-2000

www.juniper.net

Part Number: 530-015643-01 Revision 05

Security Products

SSG 140 Hardware Installation and Configuration Guide

2

Juniper Networks, the Juniper Networks logo, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and

other countries. All other trademarks, service marks, registered trademarks, or registered service marks in this document are the property of Juniper

Networks or their respective owners. All specifications are subject to change without notice. Juniper Networks assumes no responsibility for any

inaccuracies in this document or for any obligation to update information in this document. Juniper Networks reserves the right to change, modify,

transfer, or otherwise revise this publication without notice.

FCC Statement

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. The equipment generates, uses, and can radiate radio-frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency

energy. If it is not installed in accordance with Juniper Networks’ installation instructions, it may cause interference with radio and television reception.

This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC

rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user