Kanto SYD Manual

Kanto Højttaler SYD

Læs gratis den danske manual til Kanto SYD (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Kanto SYD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

User Manual

SYD Powered Speaker

Supporting your digital lifestyle™

English

2Supporting your digital lifestyle™

Important Safety Precautions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized plug. A polarized

plug has two blades with one wider than the other. The wide blade

is provided for your safety. If the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power-supply cord from being walked on or pinched,

particularly at plugs, convenience receptacles and the point where

they exit from the apparatus.

11. Only use attachments / accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, the apparatus does not operate normally, or the

apparatus has been dropped.

15. The equipment shall be used at a maximum 35 degrees C

temperature.

16. To reduce the risk of electrical shock, do not open the device. No

user serviceable parts inside. Refer servicing to qualied service

personnel.

17. WARNING: to reduce the risk of re or electric shock, do not expose

this apparatus to rain or moisture. The apparatus shall not be

exposed to dripping or splashing. Do not place objects containing

liquid, such as vases, on the apparatus.

18. The MAINS plug is used as the disconnect device and shall remain

readily operable.

19. The product shall be used on an open bench

20. Do not place naked ame sources such as lit candles on the

apparatus

21. Protective earthing terminal. The apparatus should be connected to a

mains socket outlet with a protective earthing connection

22. CAUTION: danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type. WARNING: Batteries

or battery packs shall not be exposed to excessive heat such as

sunshine re or the like.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

BACK PANEL.NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE

The lightning ash with arrowhead, within an equilateral

triangle, is intended to alert the user of the presence of non-

insulated “dangerous voltage” within the product’s enclosure

that may be of sucient magnitude to constitute a risk of

electric shock to persons.

ATTENTION

The exclamation point within an equilateral triangle is

intended to alert the user of the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the apparatus.

FCC Notice:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help

NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Industry Canada Notice:

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or

lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that

necessary for successful communication.

This device complies with Canadian ICES-003 and RSS-210

Le pré sent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence

L’ exploitation est autorisé e aux deux conditions suivantes:

(1)l’ appareil ne droit pas produire de brouillage, et

(2)l’ utilisateur de l’ appareil doit accepter tout brouillage radioé lectrique subi, mê me si le brouillage est susceptible d’ en le

fonctionnement .

Produkt Specifikationer

Mærke:	Kanto
Kategori:	Højttaler
Model:	SYD

Har du brug for hjælp?

Hvis du har brug for hjælp til Kanto SYD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Kanto Manualer

2 Januar 2025

11 December 2024

28 August 2024

19 August 2024

18 August 2024

Kanto YU Passive Manual

18 August 2024

17 August 2024

17 August 2024

14 August 2024

14 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Muse M-968 BTY Manual

1 August 2025

Grundig Portable 360 Manual

1 August 2025

Grundig Band 360 Manual

1 August 2025

Grundig GBT Connect 360 Manual

1 August 2025

Muse M-968 BTR Manual

31 Juli 2025

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025

Valcom VIP-480AL-W-SA Manual

30 Juli 2025

Rockustics StoneHenge II-S/T Manual

30 Juli 2025