Kanto YUP6 Manual

Kanto Højttaler YUP6

Læs gratis den danske manual til Kanto YUP6 (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Kanto YUP6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Supporting your digital lifestyle™

POWERED SPEAKERS

English

User Manual

YU6 Powered Speaker

Important Safety Precautions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

• Protect the power-supply cord from being walked on or

pinched, particularly at plugs, convenience receptacles

and the point where they exit from the apparatus.

• Only use attachments / accessories specied by the

manufacturer.

• Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when

unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing

is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or

moisture, the apparatus does not operate normally, or

the apparatus has been dropped.

• Apparatus shall be connected to a MAINS socket outlet

with a protective earthing connection.

• An appliance input coupler is used as the disconnect

device - the disconnect device shall remain readily

operable.

• Batteries or battery packs shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

BACK PANEL.NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE

The lightning ash with arrowhead, within an

equilateral triangle, is intended to alert the user of

the presence of non-insulated “dangerous voltage”

within the product’s enclosure that may be of

sucient magnitude to constitute a risk of electric

shock to persons.

ATTENTION

The exclamation point within an equilateral

triangle is intended to alert the user of

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the apparatus.

FCC Notice:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected

- Consult the dealer or an experience radio / T V technician for help

NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Industry Canada Notice:

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or

lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that

necessary for successful communication.

This device complies with Canadian ICES-003 and RSS-210

Produkt Specifikationer

Mærke:	Kanto
Kategori:	Højttaler
Model:	YUP6

Har du brug for hjælp?

Hvis du har brug for hjælp til Kanto YUP6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Kanto Manualer

2 Januar 2025

11 December 2024

28 August 2024

19 August 2024

18 August 2024

Kanto YU Passive Manual

18 August 2024

17 August 2024

17 August 2024

14 August 2024

14 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Teufel Motiv XL Manual

13 August 2025

Niceboy Orion Manual

12 August 2025

PSB SubSeries BP12 Manual

12 August 2025

Tannoy CVS 401X Manual

12 August 2025

Moonki MW-T400 Manual

12 August 2025

Klipsch Reference RS-3 II Manual

12 August 2025

Phonic JUBI 15AR Manual

12 August 2025

Crosley Mini Boombox CR3050A Manual

12 August 2025

Moonki MW-T520 Manual

12 August 2025

Phonic JUBI 15 Manual

12 August 2025