Kathrein UFS 790si Manual

Kathrein Digital dekoder UFS 790si

Læs gratis den danske manual til Kathrein UFS 790si (80 sider) i kategorien Digital dekoder. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Kathrein UFS 790si, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/80

Operating Manual

- Englisch -

DVB combi receiver

(SAT + DVB-T)

UFS 790si/sw

FOREWORD/IMPORTANT INFORMATION

Dear customer,

This operating manual is intended to help you make the fullest use of the extensive range of functions oﬀered

by your new satellite receiver.

We have tried to make the operating instructions as easy as possible to understand, and to keep them as

concise as possible.

If you will not be using your receiver for a longer period, you should disconnect it from the mains to save

energy. For shorter breaks, you can use the remote control to switch the receiver to standby, which uses only

a minimal amount of energy.

We wish you good reception and much pleasure using your new DVB-Sat receiver.

Your

KATHREIN team

The programs available on the satellites and transponders as well as the DVB-T channels are subject to

continual change. This means the channel settings have to be regularly updated, even though the factory

presetting always represents the latest version when the receiver was shipped. The information for these

settings can be found on the Internet or in relevant magazines.

Your receiver was equipped in the factory with the latest software version at that time. We are, however,

constantly working on adapting the software to the wishes of our customers and to developments in

technology. The “Software Update” section provides more information on this aspect.

The information in this operating manual was correct at the time of going to press.

We reserve the right however to make changes at any time and without prior notice.

If new software is released for your receiver, and this aﬀects the information in the operating manual

(e.g. changes to the menus and/or functions), if we believe it necessary we will make available a new

operating manual for download under “www.kathrein.de”.

Please keep the original packaging in case you need to return the product at any time!

If the product is not properly packed, the warranty claim is invalidated.

Make a note of the receiver's basic settings (these are set during the ﬁ rst installation), so you can restore

them if necessary!

The term DiSEqC™ used in this operating manual is a registered trade mark of the European

Telecommunication Satellite Organisation (EUTELSAT).

In order to disconnect the UFS 790 from the mains completely, the mains plug must

be unplugged from the wall socket! Therefore place the UFS 790 near to a wall

socket and make sure the socket is accessible, so that at any time (e.g. during a

thunderstorm or during a long absence) you can disconnect the receiver from the

mains.

IMPORTANT INFORMATION

Produkt Specifikationer

Mærke:	Kathrein
Kategori:	Digital dekoder
Model:	UFS 790si
Vægt:	2000 g
Produktfarve:	Sølv
Understøttede videotilstande:	1080i, 576i, 576p, 720p
Digital akustisk og optisk udgang:	1
Antal RF-porte:	2
Antal SCART-porte:	2
Elektronisk programguide (EPG):	Ja
Skærmvisning (OSD):	Ja
Tekst-tv-funktioner:	Ja
Strømforbrug (standby):	8 W
Strømforbrug (typisk):	22 W
Driftstemperatur (T-T):	5 - 40 °C
Intern hukommelse:	16 MB
Dimensioner (BxDxH):	280 x 185 x 45 mm
Fjernbetjening inkluderet:	Ja
Frekvensområde:	0.04 - 20 Mhz
HDMI:	Ja
Effektkrav:	230V /50-60Hz
Tekst-tv:	800 Sider
Processorfrekvens:	150 Mhz
Sammensat videoudgang:	1
Lyd (L, R) udgang:	1
Flashhukommelse:	4 MB
Antal kanaler:	4000 kanaler
Indgangsfrekvensområde:	470 - 862 Mhz
Styring af digital satellit-udstyr (DiSEqC):	1.0
Liste over foretrukne tv-programmer:	4
RF-stik:	F