Keiser M3 Manual


Læs gratis den danske manual til Keiser M3 (20 sider) i kategorien motionscykel. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Keiser M3, eller vil du spørge andre brugere om produktet?

Side 1/20
USER MANUAL
USER MANUAL
UNPACKING THE BIKE
Carefully remove the bike from the cardboard box. Lay out all the components and check to assure
all parts are present and undamaged. If parts are missing or damaged contact your local dealer,
distributor or Keiser Corporation Service Department. After unpacking and verifying parts, you are
ready to start your assembly. You need an area that is free of dirt, dust or other foreign material that
could impair the assembly of your bike.
BEFORE ASSEMBLING
Always follow the steps in this manual as you assemble your bike. Do not skip, substitute or modify
any steps or procedures of this assembly, as doing so could result in personal injury and will void your
warranty. We have put a number of precautions in this manual.
NOTE: Informs you about things we recommend you do or are aware of, before
performing the assembly. These notes are placed in the manual to aid you during a
certain procedure or to make you aware of any general mandatory actions or information.
WARNING: This symbol appearing throughout this manual means PAY ATTENTION! BE
ALERT! When you see this warning symbol, your safety is involved. It is being used to
call attention to POTENTIAL hazards that could result in personal injury or loss of life.
1
PRE-ASSEMBLY INSTRUCTIONS .....................................................
ASSEMBLY INSTRUCTIONS ..............................................................
M3 HANDLEBAR INSTALLATION ......................................................
M3
+
HANDLEBAR INSTALLATION ..................................................
FLYWHEEL GUARD INSTALLATION ..................................................
CHECKING FOR PROPER OPERATION ............................................
SAFETY INFORMATION AND INSTRUCTIONS .................................
BIKE FITTING .....................................................................................
RESISTANCE/COMPUTER OVERVIEW .............................................
CALIBRATION INFORMATION ...........................................................
PREVENTITIVE MAINTENANCE CHART ...........................................
WARRANTY TERMS ...........................................................................
1
4
6
7
9
11
11
12
15
17
18
19
TABLE OF CONTENTS
Torque wrench (Minimum 45 Nm / 35 ft-lb) 16mm, or 5/8” crowfoot
4” extension 5mm Allen Wrench
15mm open-end wrench 6mm Allen Wrench
16mm, or 5/8” open-end wrench Paste or spray wax (used to clean after assembly)
#2 Phillips screwdriver Clean cloth
15mm crowfoot LPS #3 Heavy Duty Rust Inhibitor w/straw
2 - 10mm Wrenches
TOOLS YOU WILL NEED
NOTE: The substitution or modification of any part or component,
other than what is approved by Keiser, will void your warranty.


Produkt Specifikationer

Mærke: Keiser
Kategori: motionscykel
Model: M3

Har du brug for hjælp?

Hvis du har brug for hjælp til Keiser M3 stil et spørgsmål nedenfor, og andre brugere vil svare dig