Kenwood CMOS 210 Manual

Kenwood Bakkamera CMOS 210

Læs gratis den danske manual til Kenwood CMOS 210 (116 sider) i kategorien Bakkamera. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Kenwood CMOS 210, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/116

CMOS-310

CMOS-210

UNIVERSAL MULTI-VIEW CAMERA/ UNIVERSAL REAR VIEW CAMERA

INSTRUCTION MANUAL

CAMÉRA MULTI-VUES UNIVERSELLE/ CAMÉRA DE RECUL UNIVERSELLE

MODE D’EMPLOI

UNIVERSAL MULTIVIEW-KAMERA/ UNIVERSAL RÜCKFAHRKAMERA

BEDIENUNGSANLEITUNG

UNIVERSELE MULTIVIEWCAMERA/ UNIVERSELE ACHTERUITRIJCAMERA

GEBRUIKSAANWIJZING

TELECAMERA MULTIVISIONE UNIVERSALE/ TELECAMERA PER RETROMARCIA UNIVERSALE

ISTRUZIONI PER L’USO

CÁMARA DE MULTIVISIÓN UNIVERSAL/ CÁMARA DE VISTA TRASERA UNIVERSAL

MANUAL DE INSTRUCCIONES

CÂMARA MULTIVISÃO UNIVERSAL/ CÂMARA TRASEIRA UNIVERSAL

MANUAL DE INSTRUÇÕES

通用多图像摄像头/通用后视摄像头

使用说明书

B64-4963-08/00 (W)

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best

performance from your new Universal Camera.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty

card, and in the space provided below. Refer to the model and serial numbers whenever you call

upon your Kenwood dealer for information or service on the product.

Model CMOS-310/CMOS-210 Serial number

US Residence Only

2 | CMOS-310/CMOS-210

• When mounting this unit, make sure none of the leads are

trapped between this unit and the surrounding metalwork

or  ttings.

• Do not mount this unit near the heater outlet, where

it would be a ected by heat, or near the doors, where

rainwater might splash onto it. (Never install in locations

such as the above because of the danger of malfunction

due to high temperatures.)

• Before drilling any mounting holes always check behind

where you want to drill the holes. Do not drill into the gas

line, brake line, electrical wiring or other important parts.

• If this unit is installed in the passenger compartment,

anchor it securely so it does not break free while the car is

moving, and cause injury or an accident.

• If this unit is installed under a front seat, make sure it does

not obstruct seat movement. Route all leads and cords

carefully around the sliding mechanism so they do not get

caught or pinched in the mechanism and cause a short

circuit.

Care and maintenance

• When the product gets dirty, wipe dry with a silicon cloth

or soft cloth. If it is seriously stained, remove stain with

a cloth moistened with a neutral cleaner and then wipe

the cleaner away. Do not use a hard cloth and/or a volatile

substance such as lacquer thinner or alcohol, scratches,

deformation, degradation and/or damage may result.

• When a lens component gets dirty, wipe gently with a soft

cloth moistened with water. Do not rub with a dry cloth to

prevent scratching the lens.

Installation Procedure

1 To prevent a short circuit, remove the key from the

ignition and disconnect the - battery.

2 Make the proper input and output wire connections

for each unit.

3 Connect the wiring harness wires in the following

order: ground, ignition and camera unit.

4 Install the unit in your car.

5 Reconnect the - battery.

WARNING

• If you connect the ignition wire (Red) to the car chassis

(Ground), you may cause a short circuit, that in turn may

start a  re. Always connect those wires to the power source

running through the fuse box.

• Do not cut out the fuse from the ignition wire (Red). The

power supply must be connected to the wires via the fuse.

WARNING

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

• Installation and wiring of this product require specialist

skill and experience. To assure your safety, please request a

specialist technician to install the unit.

CAUTION

To prevent damage to the product, take the

following precautions:

• Make sure to ground the unit to a negative 12V DC power

supply.

• When replacing a fuse, only use a new fuse with the

prescribed rating. Using a fuse with the wrong rating may

cause your unit to malfunction.

• Do not use your own screws. Use only the screws provided.

If you use the wrong screws, you could damage the unit.

NOTE

• This product is a rear view camera for checking the view at

the rear of a car.

• A rear view camera is a camera that provides symmetrical

images in the same way as rear and side view mirrors.

• Connection to a TV with an RCA video input is possible,

but con rm whether the TV you use has a reverse gear

connection function.

• This product is designed to supplement the driver’s rear

view, but the camera images do not show all dangers and

obstacles. Be sure to look behind you when reversing to

con rm the view.

• This product features a wide-angle lens, so the near view

is wide and the far view is narrow, which may create a

false sense of distance. Be sure to look behind you when

reversing to con rm the view.

• Do not wash your car with an automatic car wash or

high-pressure water as it may result in water entering the

camera or the camera falling o .

• Check camera bracket installation before driving.

Are the screws loose?

- Is the camera bracket  rmly secured?

- If the rear view camera comes loose while you are driving

it may cause an accident.

• Before  nally installing the unit, connect the wiring

temporarily, making sure it is all connected up properly,

and the unit and the system work.

Before Use/ Installation Procedure

Produkt Specifikationer

Mærke:	Kenwood
Kategori:	Bakkamera
Model:	CMOS 210

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenwood CMOS 210 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bakkamera Kenwood Manualer

Kenwood CMOS-C230 Manual

30 December 2025

Kenwood KCA-2020AVM Manual

25 August 2024

Kenwood CMOS-C320 Manual

27 Juli 2024

Kenwood CMOS 210 Manual

28 Juni 2024

Kenwood CCD-2000 Manual

7 Oktober 2022

Bakkamera Manualer

Nyeste Bakkamera Manualer

Pioneer ND-BC9 Manual

29 Maj 2025

Dometic PerfectView CAM 18 Manual

20 Februar 2025

Dometic PerfectView CAM35 2.0 Manual

11 Januar 2025

29 December 2024

29 December 2024

29 December 2024

29 December 2024

6 December 2024

Dometic PerfectView CAM 11 Manual

26 November 2024

CRUX RVCCH-75RC Manual

18 November 2024