Kenwood CMOS-220 Manual

Kenwood Dash cam CMOS-220

Læs gratis den danske manual til Kenwood CMOS-220 (53 sider) i kategorien Dash cam. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Kenwood CMOS-220, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/53

CMOS-320

CMOS-220

UNIVERSAL MULTI-VIEW CAMERA/ UNIVERSAL REAR VIEW CAMERA

INSTRUCTION MANUAL

CAMÉRA MULTI-VUES UNIVERSELLE/ CAMÉRA DE RECUL UNIVERSELLE

MODE D’EMPLOI

UNIVERSAL MULTIVIEW-KAMERA/ UNIVERSAL RÜCKFAHRKAMERA

BEDIENUNGSANLEITUNG

UNIVERSELE MULTIVIEWCAMERA/ UNIVERSELE ACHTERUITRIJCAMERA

GEBRUIKSAANWIJZING

LYT2720-001A (W)

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best performance

from your new Universal Camera.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card,

and in the space provided below. Refer to the model and serial numbers whenever you call upon your

Kenwood dealer for information or service on the product.

Model CMOS-320/CMOS-220 Serial number

US Residence Only

2 | CMOS-320/CMOS-220

• Beforenally      installing the unit, connect the wiring

temporarily,   making sure it is all connected up properly,

and and  the unit the system work.

• When mounting unit, none the  this   make sure  of   leads are

trapped      between this unit and the surrounding metalwork

orttings.

• Do     not mount this unit near the   heater outlet, where

it be would  aected by   heat, or near the  doors, where

rainwater    might splash onto it. (Never   install in locations

such danger      as the above because of the   of malfunction

due high to temperatures.)

• Beforedrilling     any mounting holes always check behind

where the the    you want to drill      holes. Do not drill into gas

line, line, wiring other important brake  electrical  or  parts.

• If        this unit is installed in the passenger compartment,

anchor   it securely so itdoes    not break free while the  car is

moving,     and cause injury or an accident.

• If     a      this unit is installed under front seat, make sure it does

not obstruct      seat movement. Route all leads and cords

carefully the sliding around      mechanism so they do not get

caught  or pinched in    a the mechanism and cause short

circuit.

Care and maintenance

• When the       a  product gets dirty, wipe dry with silicon cloth

or          soft cloth. If it is seriously stained, remove stain with

a   acloth moistened with neutral   cleaner and then wipe

the     a   a cleaner away. Do not use hard cloth and/or volatile

substance such lacquer  as    thinner or alcohol, scratches,

deformation, damage  degradation and/or  may result.

• When component gentlya lens    gets dirty, wipe witha soft

cloth     moistened with water. Do not rub a   with dry cloth to

preventscratchingthelens.

Installation Procedure

1 Topreventashortcircuit,removethe fromthekey

ignitionanddisconnectthe battery.-

2 Maketheproperinputandoutputwireconnections

foreachunit.

3 Connectthewiringharnesswiresinthefollowing

order:ground,ignitionandcameraunit.

4 Installtheunitinyourcar.

5 Reconnectthe battery.-

WARNING

To prevent injury or fire, take the following

precautions:

• To a     prevent short circuit, never put or leave  any metallic

objects   (such as coins or   metal tools) inside theunit.

• Installation and specialist      wiring of this product require 

skill     and experience. To assure your safety,  aplease request

specialist technician    to install the unit.

• When the the  a   you make hole to install   camera, check 

location tanks and and  of pipes,   wiring   avoid touching

them. Otherwise the    it may cause re.

• When  a  a     you make hole with drill, use goggles to protect

youreyes.

CAUTION

To prevent damage to the product, take the

following precautions:

• Make     sure to ground the unit toa    negative 12V DC power

supply.

• When replacing new the a   afuse, only use   fuse with 

prescribed rating. Using the wronga  fuse with    rating may

cause to  your unit malfunction.

• Do       not use your own screws. Use only the  screws provided.

If use you        the wrong screws, you could damage the unit.

NOTE

• A    a  rear view camera is camera that provides symmetrical

images in the      same way as rear and  side view mirrors.

• Connection ato TVwith     an RCA video input is possible,

but   conrm whether the TV you use a  has reverse gear

connection function.

• This product is        designed to supplement the driver’s rear

view,    but the camera images do     not show all dangers and

obstacles. sure look Be  to behind    you when reversing to

conrm the view.

• This product  a      features wide-angle lens, so the near view

is far   wide and the view     ais narrow, which may create

false   sense of distance. Be     sure to look behind you when

reversing the view.  to conrm 

• Do    not wash your car with     an automatic car wash or

high-pressure  water as it      may result in water entering the

camera camera  or the  falling o.

• Check camera bracket  installation before driving.

 Are  the screws loose?

-   Is the camera bracket rmly secured?

-      If the rear view camera comes loose    while you are driving

it   may cause an accident.

Before Use/ Installation Procedure

Produkt Specifikationer

Mærke:	Kenwood
Kategori:	Dash cam
Model:	CMOS-220
Bredde:	23.4 mm
Dybde:	23.9 mm
Højde:	23.4 mm
Vægt:	22 g
Produktfarve:	Sort
Driftstemperatur (T-T):	-30 - 70 °C
Vandfast:	Ja
Forbindelsesteknologi:	Ledningsført
Sensortype:	CMOS
Billede sensor størrelse:	1/3.6 "
Minimumsbelysning:	0.9 Lux
Skærm inkluderet:	Ingen
Horisontalt synsfelt:	128 °
Vertikalt synsfelt:	108 °