Kenwood CMOS-230 Manual

Kenwood Dash cam CMOS-230

Læs gratis den danske manual til Kenwood CMOS-230 (52 sider) i kategorien Dash cam. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Kenwood CMOS-230, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/52

CMOS-230

UNIVERSAL REAR VIEW CAMERA

INSTRUCTION MANUAL

CAMÉRA DE RECUL UNIVERSELLE

MODE D’EMPLOI

UNIVERSAL RÜCKFAHRKAMERA

BEDIENUNGSANLEITUNG

UNIVERSELE ACHTERUITRIJCAMERA

GEBRUIKSAANWIJZING

TELECAMERA PER RETROMARCIA UNIVERSALE

ISTRUZIONI PER L’USO

CÁMARA DE VISTA TRASERA UNIVERSAL

MANUAL DE INSTRUCCIONES

CÂMARA TRASEIRA UNIVERSAL

MANUAL DE INSTRUÇÕES

通用后视摄像头

使用说明书

B5A-0543-00 (W)

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best performance

from your new Universal Camera.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card,

and in the space provided below. Refer to the model and serial numbers whenever you call upon your

Kenwood dealer for information or service on the product.

Model CMOS-230 Serial number

US Residence Only

2 |

ENGLISH

• Before  nally installing the unit, connect the wiring

temporarily, making sure it is all connected up properly,

and the unit and the system work.

• When mounting this unit, make sure none of the leads are

trapped between this unit and the surrounding metalwork

or  ttings.

• Do not mount this unit near the heater outlet, where

it would be a ected by heat, or near the doors, where

rainwater might splash onto it. (Never install in locations

such as the above because of the danger of malfunction

due to high temperatures.)

• Before drilling any mounting holes always check behind

where you want to drill the holes. Do not drill into the gas

line, brake line, electrical wiring or other important parts.

• If this unit is installed in the passenger compartment,

anchor it securely so it does not break free while the car is

moving, and cause injury or an accident.

• If this unit is installed under a front seat, make sure it does

not obstruct seat movement. Route all leads and cords

carefully around the sliding mechanism so they do not get

caught or pinched in the mechanism and cause a short

circuit.

Care and maintenance

• When the product gets dirty, wipe dry with a silicon cloth

or soft cloth. If it is seriously stained, remove stain with

a cloth moistened with a neutral cleaner and then wipe

the cleaner away. Do not use a hard cloth and/or a volatile

substance such as lacquer thinner or alcohol, scratches,

deformation, degradation and/or damage may result.

• When a lens component gets dirty, wipe gently with a soft

cloth moistened with water. Do not rub with a dry cloth to

prevent scratching the lens.

Installation Procedure

1 To prevent a short circuit, remove the key from the

ignition and disconnect the - battery.

2 Make the proper input and output wire connections

for each unit.

3 Connect the wiring harness wires in the following

order: ground, ignition and camera unit.

4 Install the unit in your car.

5 Reconnect the - battery.

WARNING

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

• Installation and wiring of this product require specialist

skill and experience. To assure your safety, please request a

specialist technician to install the unit.

• When you make a hole to install the camera, check the

location of pipes, tanks and wiring and avoid touching

them. Otherwise it may cause the  re.

• When you make a hole with a drill, use goggles to protect

your eyes.

CAUTION

To prevent damage to the product, take the

following precautions:

• Make sure to ground the unit to a negative 12V DC power

supply.

• When replacing a fuse, only use a new fuse with the

prescribed rating. Using a fuse with the wrong rating may

cause your unit to malfunction.

• Do not use your own screws. Use only the screws provided.

If you use the wrong screws, you could damage the unit.

NOTE

• A rear view camera is a camera that provides symmetrical

images in the same way as rear and side view mirrors.

• Connection to a TV with an RCA video input is possible,

but con rm whether the TV you use has a reverse gear

connection function.

• This product is designed to supplement the driver’s rear

view, but the camera images do not show all dangers and

obstacles. Be sure to look behind you when reversing to

con rm the view.

• This product features a wide-angle lens, so the near view

is wide and the far view is narrow, which may create a

false sense of distance. Be sure to look behind you when

reversing to con rm the view.

• Do not wash your car with an automatic car wash or

high-pressure water as it may result in water entering the

camera or the camera falling o .

• Check camera bracket installation before driving.

Are the screws loose?

- Is the camera bracket  rmly secured?

- If the rear view camera comes loose while you are driving

it may cause an accident.

Before Use/ Installation Procedure

Produkt Specifikationer

Mærke:	Kenwood
Kategori:	Dash cam
Model:	CMOS-230
Kode for international beskyttelse (IP):	IP67
Bredde:	23.4 mm
Dybde:	23.9 mm
Højde:	23.4 mm
Vægt:	21 g
Brugervejledning:	Ja
Produktfarve:	Hvid
Vandfast:	Ja
Forbindelsesteknologi:	Ledningsført
Sensortype:	CMOS
Billede sensor størrelse:	1/3.6 "
Minimumsbelysning:	0.9 Lux
Skærm inkluderet:	Ingen
Horisontalt synsfelt:	128 °
Vertikalt synsfelt:	103 °