Kern DS 8K0.05 Manual

Kern Postvægt DS 8K0.05

Læs gratis den danske manual til Kern DS 8K0.05 (42 sider) i kategorien Postvægt. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Kern DS 8K0.05, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/42

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Tel: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

Operating instructions

Precision/ compact balances and

platform scales

KERN 572/573/KB/DS/FKB/FCB/KBJ

Version 7.0

07/2013

572/573/KB/DS/FKB/FCB/KBJ-BA-e-1370

KERN 572/573/KB/DS/FKB/FCB/KBJ

Version 7.0 07/2013

Operating instruction

Precision/compact balances and platform scales

Table of contents:

1 MODE - MENUE ....................................................................................................... 3

2 Technical data ......................................................................................................... 5

2.1 KERN 572 ..............................................................................................................................................5

2.2 KERN 573 ..............................................................................................................................................8

2.3 KERN KB/KBJ ......................................................................................................................................9

2.4 KERN DS .............................................................................................................................................13

2.5 KERN FCB ..........................................................................................................................................18

2.6 KERN FKB ..........................................................................................................................................19

3 Fundamental information (general) ..................................................................... 22

3.1 Intended use .......................................................................................................................................22

3.2 Inappropriate use ...............................................................................................................................22

3.3 Guarantee ...........................................................................................................................................22

3.4 Monitoring the test substances .......................................................................................................22

4 Fundamental safety information .......................................................................... 23

4.1 Observe the information in the operating instructions .................................................................23

4.2 Staff training .......................................................................................................................................23

5 Transport and storage .......................................................................................... 23

5.1 Acceptance check ..............................................................................................................................23

5.2 Packaging ...........................................................................................................................................23

6 Unpacking, installation and commissioning ...................................................... 24

6.1 Place of installation, place of use ....................................................................................................24

6.2 Unpacking ..........................................................................................................................................24

6.2.1 Installation ............................................................................................................................................24

6.3 Mains supply ......................................................................................................................................24

6.4 Battery operation FKB .......................................................................................................................25

6.5 Connecting peripheral equipment ...................................................................................................25

6.6 Initial start-up .....................................................................................................................................25

6.7 Adjustment .........................................................................................................................................25

6.8 Adjusting (go to 7.2.6) .......................................................................................................................26

6.8.1 Adjusting for verification (KERN 573; FKB-M; KB-NM; FCB-M; DS-M) ...............................................26

6.9 Verification .........................................................................................................................................27

7 Operation ............................................................................................................... 28

7.1 Display control panel ........................................................................................................................28

7.2 Operation ............................................................................................................................................29

7.3 Display background illumination .....................................................................................................35

7.4 Interface RS 232 C .............................................................................................................................35

7.5 RS 232 C Data output via interface RS 232 C .................................................................................36

7.5.1 Description of the data transfer............................................................................................................37

7.5.2 Numerator ............................................................................................................................................37

7.6 Printer .................................................................................................................................................37

7.7 Underfloor weighing ..........................................................................................................................38

8 Maintenance, upkeep, disposal ........................................................................... 39

8.1 Cleaning ..............................................................................................................................................39

8.2 Maintenance, upkeep ........................................................................................................................39

8.3 Disposal ..............................................................................................................................................39

9 Troubleshooting .................................................................................................... 40

10 Declaration of conformity ..................................................................................... 41